Table Top for DICTUM Multifunction Table PRO, Hole Pattern 77
Replacement top with hole grid for DICTUM Multifunction Table PRO. 77 holes with Ø 20 mm allow an exact right-angled positioning of bench dogs and clamping devices. Hole spacing 95 mm. Worktop dimensions 1114 x 734 mm.
€165.00
incl. VAT plus shipping costs
Article No. 728767
Table Top for DICTUM Multifunction Table PRO, Hole Pattern X61
Replacement top with hole grid for DICTUM Multifunction Table PRO. 61 holes with Ø 20 mm allow an exact right-angled positioning of bench dogs and clamping devices. Two crossed slot grids allow the clamping of components without being...
€165.00
incl. VAT plus shipping costs
Article No. 728770
DICTUM Guide Rail Spacer FSD15, Pair
When formatting with plunge-cut saws on perforated plates (e.g. multifunction tables), bench dogs are often used to position the workpiece and guide rail. From a certain material thickness the problem arises that short bench dogs do not...
€39.40
incl. VAT plus shipping costs
Article No. 728989
DICTUM Mounting Post SSP for Hold Down Clamp
The mounting post allows toggle lever clamps, push rod clamping devices and other quick-action clamps to be easily fixed on almost any workbench top, with height adjustment being still possible. Various quick-action clamps of different...
€39.90
incl. VAT plus shipping costs
Article No. 728990
Veritas Planing Stop
Aluminium stop for fixing boards and flat workpieces on the benchtop. The side positioning eliminates the need for inconvenient hold down clamps that reach into the surface of the workpiece. This allows you to work on the entire surface....
€28.60
incl. VAT plus shipping costs
Article No. 703600
T-slot Nut for 8 mm Groove
T-slot nut with pressure ball for T-track profiles for use with the DICTUM Multifunction Table PRO (e.g. No. 728760 ). Self-made clamping and auxiliary devices can thus be mounted quickly and easily on the table construction. Fits e.g....
€2.60
incl. VAT plus shipping costs
Article No. 728776
Parallel Connector for Aluminium Profile, 40 x 40 mm
Parallel connector for 40 x 40 mm aluminium profiles. Suitable for connecting two or more Multifunction Tables PRO (e.g. No. 728760 ). Made of anodised aluminium. 1 pair incl. connecting screw.
€29.30
incl. VAT plus shipping costs
Article No. 728778
Cross Connector for Aluminium Profile, 40 x 40 mm
Cross connector for 40 x 40 mm aluminium profiles. Two cross connectors are required per joint. Fits Multifunction Tables PRO (e.g. No. 728760 ). Made of anodised aluminium. 1 piece, incl. fastening screw M6 (without slot nut).
€12.40
incl. VAT plus shipping costs
Article No. 728779
€35.90
incl. VAT plus shipping costs
Article No. 714222
€39.20
incl. VAT plus shipping costs
Article No. 714226
€51.20
incl. VAT plus shipping costs
Article No. 714230
Single Hook, Short, incl. Mounting Material
Hook for hanging e.g. ring spanners. Two hooks mounted next to each other can be used to hold e.g. hammers.
€11.90
incl. VAT plus shipping costs
Article No. 729847
€11.90
incl. VAT plus shipping costs
Article No. 729845
Bessey Clamping Element for Multifunction Tables (TW-KLI)
Plug-in clamp for use on workbenches and multifunction tables with 20 mm hole grid. The lightweight die-cast magnesium clamp arms can be positioned quickly, and tensioning is effortless and controlled via a ratchet lever. Thanks to the...
€34.90
incl. VAT plus shipping costs
Article No. 703223
Hattori Multi-purpose Positioning Squares 90/45, 2-Piece Set
Horizontally or vertically, for screwing, plugging or clamping. Versatile, practical and precise, the 90° squares can be used for positioning or assembling workpieces, and for setting up fences and auxiliary devices. Screws: Screwed with...
€69.00
incl. VAT plus shipping costs
Article No. 729529
Quick-Action Hold Down Clamp
The advantage of this quick-action hold down clamp lies in its extremely compact design without protruding shaft and quick fixing thanks to the lever arm. As a result, it does not obstruct the work and can be moved quickly at any time....
€58.00
incl. VAT plus shipping costs
Article No. 705762
Quick-Action Hold Down Clamp
The clamping force (up to 2500 N) can be adjusted depending on the application using the set screw in the joint. The hold down clamp automatically adjusts to the height of the particular workpiece (1-40 mm) without needing to manually...
€49.90
incl. VAT plus shipping costs
Article No. 706147
Double Hook, incl. Mounting Material
Double hook for hanging e.g. open-end spanners, screwdrivers, etc. Distance between the hooks: 16 mm.
€12.90
incl. VAT plus shipping costs
Article No. 729846
Hook, incl. Mounting Material
Hook for hanging e.g. screwdrivers, pliers, etc. Two hooks mounted next to each other can be used to hold e.g. hammers.
€14.90
incl. VAT plus shipping costs
Article No. 729848
Holder for Cordless Screwdriver, incl. Mounting Material
Robust holder for cordless screwdrivers and small drills weighing up to 2 kg. The opening at the front allows the power tools to be removed quickly, even with longer tools. Frequently used bits are kept ready to hand in four integrated...
€20.90
incl. VAT plus shipping costs
Article No. 729844
Slot Nut with 20 mm Locking Pin for DICTUM Universal Guide Rail
Matching slot nut with locking pin for DICTUM universal guide rails. The Ø 20 mm stainless steel pins allow the guide rail to be positioned quickly and easily in the hole grid of multifunction tables. There is no need for time-consuming...
€9.90
incl. VAT plus shipping costs
Article No. 714665
UJK Guide Dogs, Pair
The Guide Dogs have a chamfered collar piece that aligns in the countersunk 20 mm holes of a perforated plate and fixes the bench hook. Thus, the bench hook has a 20 mm diameter throughout, which facilitates the positioning of workpieces...
€19.90
incl. VAT plus shipping costs
Article No. 745214
UJK Anti-Slip Protection Dogs, Set
The anti-slip dogs have two important functions. They prevent the workpieces from slipping on the often smooth MDF table tops of the multifunction tables. In addition, they prevent the tabletop from being cut with the plunge saw. To cut...
€24.90
incl. VAT plus shipping costs
Article No. 745216
UJK Surface Cam Clamps, Pair
Eccentric clamping lever for flat workpieces. With Ø 20 mm bench dogs, e.g. UJK Guide Dogs (No. 745214 ), the clamping levers can be used on multifunction tables or 20 mm bench dog holes.
€25.60
incl. VAT plus shipping costs
Article No. 745217
UJK Parf Revision Dogs, Set
The Revision Dogs are used to precisely align and extend the UJK Parf Guide System (No. 720774 ). The Parf sticks can thus be aligned with existing 20 mm holes. To do this, at least two Revision Dogs are positioned in the holes and the...
€21.00
incl. VAT plus shipping costs
Article No. 745218
€7.20
incl. VAT plus shipping costs
Article No. 745226
Festool Ear Protection GHS 25 I
Small, light and convenient - the cordless Bluetooth earplugs are your daily companion in the bodyshop or on the construction site. It protects you from noise while you work and enables you to make telephone calls via Bluetooth or listen...
€179.00
incl. VAT plus shipping costs
Article No. 721504
KNAPP Dowels
This plastic dowel from Knapp offers a new solution for joints in furniture making and interior design. Thanks to its special thread design, the dowel is self-tightening. Two longitudinal grooves ensure optimum distribution of the glue...
€14.90
incl. VAT plus shipping costs
Article No. 760174
€6.70
incl. VAT plus shipping costs
Article No. 746241
EGO Linseed Oil Putty
Guaranteed pure EGO linseed oil putty, made of linseed oil of the highest quality, using local Upper Bavarian mountain chalk from Kaltenbrunn (Garmisch-Partenkirchen). It is manufactured according to the quality conditions of RAL 849/B4...
€5.50
incl. VAT plus shipping costs
Article No. 700156
Milescraft »TriGrips«, 4-Piece Set
These non-slip work supports hold workpieces securely for routing, sanding, painting, drilling, carving and more. The pads hold projects in place while elevating them above the work surface allowing complete access to edges while holding...
€15.80
incl. VAT plus shipping costs
Article No. 714538
Painter's Pyramids, 10-Piece Set
These painter's pyramids reduce the contact surface of workpieces during painting or varnishing to a minimum while still remaining stable. The brackets on the sides allow for clipping the triangles together or for screwing them to the...
€3.90
incl. VAT plus shipping costs
Article No. 717644
Bandle Putty Knife with Pointed Blade
Bandle putty knives are traditionally used when inserting glass panes with exposed putty bevels into window and door frames made of wood or concrete windows and for filling cracks and damaged areas in wood. The pointed shape enables...
€14.20
incl. VAT plus shipping costs
Article No. 730836
Bandle Weatherboard Putty Knife with Straight Blade
Bandle putty knives are traditionally used when inserting glass panes with exposed putty bevels into window and door frames made of wood or concrete windows and for filling cracks and damaged areas in wood. The curved shape is specially...
€16.90
incl. VAT plus shipping costs
Article No. 730834
Bandle Putty Knife with Straight Blade
Bandle putty knives are traditionally used when inserting glass panes with exposed putty bevels into window and door frames made of wood or concrete windows and for filling cracks and damaged areas in wood. The straight shape makes it...
€14.90
incl. VAT plus shipping costs
Article No. 730835
Baren (Rubbing Tool) with Felt Pad
Stamp-shaped rubbing tool made of solid wood for lino printing and other printing techniques. The 5-mm thick felt overlay ensures gentle and even pressure distribution .
€5.90
incl. VAT plus shipping costs
Article No. 731758
Japanese Workbench/Bonsai Brush
This workbench broom has always been one of the basic workshop tools in Japan. Made from the Japanese palm fern. Also often used for the care of bonsai, e.g. for sweeping dry leaves out of the crown or for cleaning the soil surface....
€9.60
incl. VAT plus shipping costs
Article No. 718327
DICTUM Microfibre Cloth
The DICTUM microfibre cloth enables optimum dust absorption due to its particularly soft and smooth surface and leaves perfectly cleaned surfaces behind; especially sensitive surfaces can be cleaned effortlessly and scratch-free with...
€2.20
incl. VAT plus shipping costs
Article No. 714138
Work Pad, Silicone, 480 x 300 mm
This non-slip work pad made of robust silicone has given us the best results when sharpening with water and oil stones. The workplace in the kitchen or workshop remains dry and clean as the surrounding rim prevents the spread of excess...
€15.80
incl. VAT plus shipping costs
Article No. 703565
Profi Clean Hand Washing Paste, 250 ml
Skin cleansing product with skin-friendly, natural rubbing agents made from walnut shell flour and effective cleansing power for heavy soiling. Solvent-free, with high-quality refatting agents.
€5.20
(Content: €20.80 / 1 litre)
incl. VAT plus shipping costs
Article No. 729016
Ultra Hand Washing Paste, 500 ml
Creamy hand cleansing paste for heavy soiling. Economical in use and dermatologically tested. Contains skin-friendly special rubbing agents and caring substances, as well as high-quality refatting agents; it is silicone-, solvent- and...
€4.50
(Content: €9.00 / 1 litre)
incl. VAT plus shipping costs
Article No. 729015
Spray Bottle, 250 ml, Pump Atomizer
Round spray bottle with a volume of 250 ml made of PET plastic, white with smooth surface, optionally with pump or trigger atomizer. The spray bottle is transport-tight due to a sealing insert; the additional protective cap or a lock on...
€1.80
incl. VAT plus shipping costs
Article No. 800579
Spray Bottle, 250 ml, Trigger Atomizer
Round spray bottle with a volume of 250 ml made of PET plastic, white with smooth surface, optionally with pump or trigger atomizer. The spray bottle is transport-tight due to a sealing insert; the additional protective cap or a lock on...
€2.20
incl. VAT plus shipping costs
Article No. 800580
Patternmaker's Vice
This multipurpose vice is the most versatile clamping tool on the workbench. The solid grey cast iron construction is equipped with a parallel guide for the jaws that rotate to allow the clamping of pieces of any shape without damaging...
€144.00
incl. VAT plus shipping costs
Article No. 705755
Dust Brush, Goat Hair
Dust brush made of pearwood trimmed with pure goat hair, which has a natural grease layer and thus excellent dust-binding and dirt-repelling properties. The soft goat hair is gentle on delicate surfaces. Its fine structure binds the...
€15.60
incl. VAT plus shipping costs
Article No. 716290
Filson Mackinaw Wool Cruiser
The classic - made by Filson since 1914. Made of 100 % virgin Mackinaw Wool for comfort, natural water-repellency and insulating warmth in any weather conditions. Nine total pockets make this warm jacket ideal for working, hunting and...
€695.00
incl. VAT plus shipping costs
Article No. 818012
DICTUM »Kyougi« Real Wood Paper, Notepad, 75 x 100 mm, 50 Sheets
Japanese notepad with paper-thin pine sheets with characteristic wood grain, natural texture and the unique scent of pine wood. According to ancient tradition, Kyougi paper is thinly planed by hand with sharp plane blades from one single...
€9.90
incl. VAT plus shipping costs
Article No. 731817
DICTUM Cap
High-quality cap made of robust beige cotton with embroidered DICTUM logo. The head size is adjustable through a band with a metal buckle. Made from 100 % brushed cotton with six embroidered vents.
€9.80
incl. VAT plus shipping costs
Article No. 707770