Magswitch Thin Stock Guide
One side is a moulded step for holding down materials with a thickness of 3 mm, 6.3 mm, 9.5 mm (⅛, ¼ and ⅜ inch). A sloped side holds down any material thickness up to 24 mm. An adjustable roller offers additional pressing options,...
€24.90
incl. VAT plus shipping costs
Article No. 711169
Magswitch Dual Roller Guide
Ball-bearing steel rollers on both ends of the guide provide firm pressure along with optimum roll and sliding properties. Ideal for rip cutting on bandsaws, as an auxiliary end stop for horizontally positioned or large workpieces on...
€41.70
incl. VAT plus shipping costs
Article No. 711168
Magswitch Universal Guide
The ball-bearing steel rollers provide firm pressure along with optimum roll and sliding properties. The angled end stop enables the simple infeed/outfeed of the workpiece on the tool. Ideal for rip cutting on bandsaws, spindle sanders...
€28.90
incl. VAT plus shipping costs
Article No. 711167
Magswitch Vertical Featherboard
If you use the Featherboard (No. 711172 ) or the Pro Machine Table Featherboard (No. 711173 ), the spring is attached with two brackets in a vertical position to press the workpiece against the machine table. If you work in a horizontal...
€23.50
incl. VAT plus shipping costs
Article No. 711166
Magswitch Workholding System Starter Package
For improved safety and perfect work results. The rotatable featherboard can be adjusted to clockwise and counter-clockwise turning cutting edges. The base plate offers many possible ways to attach optional accessories according to the...
€76.90
incl. VAT plus shipping costs
Article No. 711165
T-Track Set with Workpiece Clamps
Set of 2 T-tracks with matching rail ferrules (2 pieces). Ideal for mounting fixtures, e.g. clamping and routing jigs. The shallow rail cross-section permits mounting even in weak sheet material. Maximum clamping height 50 mm, radius 16...
€42.50
€35.90
incl. VAT plus shipping costs
Article No. 727360
TC Dovetail Cutter, Shank Ø 8 mm, 14°, Ø, 12,7 mm
Base and flank cutter in dovetail form for milling dovetail-shaped rabbets and producing auxiliary devices and stops for the Matchfit dovetail screw clamps No. 718006 and No. 718007 . Suitable for hardwood, densified wood, wood materials...
€27.10
incl. VAT plus shipping costs
Article No. 717798
MAFELL Reversible Knife 14 x 14 x 2 mm
Fits MAFELL cutter head Ø 163 x 60 mm and expanding groove cutter Ø 163 x 22-40 mm.
€6.43
incl. VAT plus shipping costs
Article No. 721073K
€73.90
incl. VAT plus shipping costs
Article No. 721076K
€500.16
incl. VAT plus shipping costs
Article No. 721077K
€49.27
incl. VAT plus shipping costs
Article No. 721079K
€502.30
incl. VAT plus shipping costs
Article No. 721080K