UJK Quick Stop for Fence Assemblies
Device that attaches to the top of your ujk router table fence and locks in place at a suitable position for the creation of stopped chamfers or rebates. You could leave it permanently attached to the fence as it can be flipped up out of...
€45.90
incl. VAT plus shipping costs
Article No. 706579
UJK Twist-Lock Insert Ring
The standard central insert supplied with the ujk Technology router elevator or ujk router table insert plates has a 38 mm diameter central hole. With additional central hole sizes the space between the cutter being used and the edge of...
€39.90
incl. VAT plus shipping costs
Article No. 706575
UJK Feather Board Pair
Featherboards for safer routing. They simply attach to your router table or fence with the supplied T-bolts and provide extra support for the workpiece as it is being passed across the cutter. The amount of applied pressure is sustained...
€29.90
incl. VAT plus shipping costs
Article No. 706577
Switch Magnetic MagJig
Fits Magswitch Universal Mounting Base No. 711171 for self-construction of auxiliary e nd stops, featherboards, deflectors etc. For additional safety you should attach at least two magnets to each device.
€32.30
incl. VAT plus shipping costs
Article No. 711177
Magswitch Riser, 4-Piece Set
Four risers with a height of 24 mm, mounting screws included. Fits Magswitch Universal Mounting Base No. 711171 , Magswitch Workholding System Starter Package No. 711165 and Magswitch Pro Table Featherboard No. 711173 .
€12.50
incl. VAT plus shipping costs
Article No. 711176
Magswitch Universal Featherboard
A flat profile and featherboards on both sides for a more universal application. Can be used on both sides of a guide fence, on clockwise and counter-clockwise turning cutting edges, on ferromagnetic machine tables and parallel end...
€49.90
incl. VAT plus shipping costs
Article No. 711174
Magswitch Pro Table Featherboard
The position of the magnets on the back optimises the hold force, even on machine tables with milled T-tracks. Suitable for thicker materials. Contains two MagJig magnets, each with 68 kg hold force. Optional accessories extend the area...
€67.50
incl. VAT plus shipping costs
Article No. 711173
Magswitch Featherboard
Featherboard usable on both sides. On the left or right side of saw blades, on milling tables or machine end stops, on clockwise and counter-clockwise turning cutting edges. Fits Magswitch Universal Mounting Base No. 711171 and Magswitch...
€21.20
incl. VAT plus shipping costs
Article No. 711172
Magswitch Universal Mounting Base
The mounting base is the core of the Magswitch clamping system. Small dimensions enable the use on small metal surfaces. For attaching a variety of pressure devices such as Magswitch Featherboard No. 711172 Magswitch Vertical...
€26.30
incl. VAT plus shipping costs
Article No. 711171
Magswitch Universal Fence, 457 mm
A highly versatile fence made of a warp-resistant aluminium profile. Various T-tracks in the aluminium fence enable the use of diverse machine clamps, hold-down clamps, stoppers, etc. Four T-tracks on each side for tenon blocks and...
€52.70
incl. VAT plus shipping costs
Article No. 711170
Magswitch Thin Stock Guide
One side is a moulded step for holding down materials with a thickness of 3 mm, 6.3 mm, 9.5 mm (⅛, ¼ and ⅜ inch). A sloped side holds down any material thickness up to 24 mm. An adjustable roller offers additional pressing options,...
€24.90
incl. VAT plus shipping costs
Article No. 711169
Magswitch Dual Roller Guide
Ball-bearing steel rollers on both ends of the guide provide firm pressure along with optimum roll and sliding properties. Ideal for rip cutting on bandsaws, as an auxiliary end stop for horizontally positioned or large workpieces on...
€41.70
incl. VAT plus shipping costs
Article No. 711168