€17.70
incl. VAT plus shipping costs
Article No. 720559
Copying Pin without ball bearing, Ø 6 mm
Copying pin without ball bearing. Pin diameter 6 mm. Length 90 mm. Fits PantoRouter.
€5.20
incl. VAT plus shipping costs
Article No. 720640
Hoffmann Table Extension
The table extension on both sides makes working on the Dovetail Routing Machine MU 3 more convenient. Fits No. 720933 .
€230.20
incl. VAT plus shipping costs
Article No. 720934
Hoffmann Internal Fence
Internal fence for left and right. Fits Dovetail Routing Machines MU 3 (No. 720933 ) and x-Line 20 No. 720932 .
€173.00
incl. VAT plus shipping costs
Article No. 720935
Hoffmann Internal Fence with Angle Adjustment
Fits Dovetail Routing Machines MU 3 (No. 720933 ) and x-Line 20 No. 720932 .
€225.00
incl. VAT plus shipping costs
Article No. 720938
Hoffmann »Synchro« Adjustable Fence, 0-90°
Fits Dovetail Routing Machines MU 3 (No. 720933 ) and x-Line 20 No. 720932 .
€309.00
incl. VAT plus shipping costs
Article No. 720939
Mortise and Tenon Templates, 7-Piece Set
5 different lengths of tenon templates with levelling tenons on the back for exact horizontal or vertical alignment. The outer contour of these templates is bevelled to allow fine adjustment of the fit. If the ball bearing is used to...
€31.40
incl. VAT plus shipping costs
Article No. 720574
BOW Featherboard
Better cutting quality, as workpiece vibration is avoided. The rigid foam spring joints absorb energy and thus reduce the risk of recoil on router tables or circular saws. Easier material feed than with plastic or wooden featherboards,...
€34.90
incl. VAT plus shipping costs
Article No. 727363
BOW FeatherPRO Replacement Feathers, 2-Piece Set
Replacement feathers for FeatherPRO and FeatherDUO. 2 pieces. Fit No. 727363 , 727364 .
€19.90
incl. VAT plus shipping costs
Article No. 727366
BOW GuidePRO Pressure Lip for Bandsaws
The flexible silicone pressure lip ensures even contact pressure, e.g. when cutting planks on the bandsaw. This reduces vibrations and makes the saw cuts more accurate. Your hands are free to guide the workpiece and away from the saw...
€90.20
incl. VAT plus shipping costs
Article No. 727367
BOW GuidePRO Pressure Lip Extension
The extension set allows a lip length of 250 mm on the GuidePRO pressure lip. Fits No. 727367 .
€28.30
incl. VAT plus shipping costs
Article No. 727368
€17.14
incl. VAT plus shipping costs
Article No. 709460K
€72.83
incl. VAT plus shipping costs
Article No. 721091K
€42.84
incl. VAT plus shipping costs
Article No. 704233K
TC Biscuit Jointing Set, Shank Ø 8 mm
The set comprises an arbor (Ø 8 mm shank) with mounted slotting cutter (cutting length 4 mm) and three replaceable ball bearings. Suitable for the three most common biscuit sizes 0, 10 and 20. In combination with the 4 mm straight plunge...
€96.90
incl. VAT plus shipping costs
Article No. 717672
TC Chamfer Bit with ball bearing, Shank Ø 8 mm
For the precise chamfering of edges and joining with the standard angles 45° (rectangle), 30° (six sides), 22.5° (eight sides) and 15° (twelve sides). Chamfer height max. 9.5 mm.
€33.60
incl. VAT plus shipping costs
Article No. 717668
TC Cove Bit with ball bearing, Shank Ø 8 mm
The high-quality ball bearing (Ø 9.5 mm) helps you guide the bit exactly along the edge of the workpiece to cut a precise 1/4 curve.
€36.90
incl. VAT plus shipping costs
Article No. 717665
TC Rounding over Bits with Ball Bearing, Shank Ø 8 mm
Using different cutting depths, you can cut soft curves as well as rebated curves (German moulding) with the same bit.
€35.90
incl. VAT plus shipping costs
Article No. 717772
TC Straight Bit with Top Ball Bearing / Copy Cutter, Shank Ø 8 mm
Bottom- and side-cutting straight bit with bearing on the shank. Ideal for copying curved shapes along a template clamped on top of the workpiece. Can also be used as a trimming bit.
€44.10
incl. VAT plus shipping costs
Article No. 717676
TC Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm
Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For...
€46.80
incl. VAT plus shipping costs
Article No. 717786
TC Core Box Bit, Shank Ø 8 mm
Full-length cutting edges which also cut on the end, without bearing. For cutting decorative grooves, grip mouldings, juice grooves and similar. Can also be used for lettering.
€29.90
incl. VAT plus shipping costs
Article No. 717766
TC V-Groove and Engraving Bit, Shank Ø 8 mm
For engraving letters and cutting V grooves and decorative grooves. Also suitable for chamfering hardwood and panel materials.
€26.70
incl. VAT plus shipping costs
Article No. 717764
TC Trimming Bit, Ø 1/2"
To ensure clean cutting of decorative layers, the bearing diameter is exactly equal to the cutting diameter. Can also be used as a copy bit.
€38.50
incl. VAT plus shipping costs
Article No. 717760
TC Rebate Bit Set with 4 Ball Bearings, Ø 34.9 mm
By changing the bearing, you can cut clean rebates at depths of 7.9, 9.5, 11.1 and 12.7 mm. Ideal for rebating curved workpieces. Includes hex key for changing the bearings.
€69.90
incl. VAT plus shipping costs
Article No. 717590
TC Classic Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R...
Classic Roman profile with step and two identical radiuses. The step interrupts the swing of the two opposite radiuses and emphasises the middle of the profile.
€63.80
incl. VAT plus shipping costs
Article No. 717785
TC Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm,...
Roman profile with two identical radiuses, without rebate. Also suitable as a cove bit.
€52.80
incl. VAT plus shipping costs
Article No. 717782
TC Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 4.8 mm, Ø 31.8 mm
Ogee profile with two identical radiuses. Also suitable as a rounding-over bit.
€56.60
incl. VAT plus shipping costs
Article No. 717781
TC Panel-Raising Bit with Ball Bearing, Shank Ø 8 mm, Ogee, Ø...
Elegantly curved ogee profile for classic door and body panels. Profile depth 19 mm. For safe cutting and clean results, we recommend cutting at a low speed (max. 12,000 rpm) and in several passes on a router table. Ideal addition to our...
€87.10
incl. VAT plus shipping costs
Article No. 717778
TC Cavetto Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm, Ø...
For cavetto profiles, concave radius with step and rebate.
€59.90
incl. VAT plus shipping costs
Article No. 717678
TC Straight Plunge Cutters, Shank Ø 8 mm
Bottom- and side-cutting straight cutter with soldered-in TC centre tip. For grooving, rebating and mortising. Suitable for plunge. For work in abrasive materials such as particle boards, MDF, plywood, and hardwood.
€29.30
incl. VAT plus shipping costs
Article No. 717673
TC Dovetail Cutter, Shank Ø 8 mm, 14°, Ø 14.3 mm
Bottom- and side-cutting dovetail shaped cutter for milling dovetail corner joints and sliding dovetail joints. To embed miter slot tracks with a 14° dovetail shaped section like the UJK dovetailed mitre slot track No. 706584 . For work...
€27.40
incl. VAT plus shipping costs
Article No. 717791
TC Dovetail Cutter, Shank Ø 8 mm, 17°, Ø 20 mm
With this dovetail cutter for use with a router, you can not only make joints more quickly and precisely, but also a lot more easily. The router cuts the grout into the wood and the matching sliding dovetail is added to the counterpart...
€37.90
incl. VAT plus shipping costs
Article No. 717792
Dovetail Cutter, Shaft Ø 8 mm, 8°
For cutting dovetail mortises and joints. Made of carbide, which gives this cutter a long service life even when used with hardwood.
€28.90
incl. VAT plus shipping costs
Article No. 720760
UJK Precision Mitre Gauge & Fence
This mitre gauge system is made from 5 mm steel plate and features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°. Simple to adjust with a spring loaded plunger stop and able to be set at any other angle between 0-90° as...
€164.00
incl. VAT plus shipping costs
Article No. 706583
UJK Hold Down Clamp
Excellent for making jigs. These hold down clamps are designed to be used with the ujk T-tracks. The large star knob allows workpieces to be secured more easily. When used with the ujk T-tracks, this results in a max. clamping width of...
€24.90
incl. VAT plus shipping costs
Article No. 706580
UJK Router Table Insert Plate
This 10 mm aluminium insert plate for router tables measures 229 x 305 and is designed to fit the UJK Technology router table tops. It is supplied with a removable central insert ring with a 38 mm diameter hole and a wrench. This...
€135.00
incl. VAT plus shipping costs
Article No. 706574
UJK Universal T-Track
A very useful aluminium T-Track which can be utilized for all manner of routing jigs, clamps and devices. Bar cross-section external dimensions 19 x 9.5 mm, slot 8.9 x 6.4 mm and T-section 13.6 mm wide. Available in 610 mm and 915 mm...
€22.50
incl. VAT plus shipping costs
Article No. 706581
UJK Quick Stop for Fence Assemblies
Device that attaches to the top of your ujk router table fence and locks in place at a suitable position for the creation of stopped chamfers or rebates. You could leave it permanently attached to the fence as it can be flipped up out of...
€45.90
incl. VAT plus shipping costs
Article No. 706579
UJK Twist-Lock Insert Ring
The standard central insert supplied with the ujk Technology router elevator or ujk router table insert plates has a 38 mm diameter central hole. With additional central hole sizes the space between the cutter being used and the edge of...
€39.90
incl. VAT plus shipping costs
Article No. 706575
UJK Feather Board Pair
Featherboards for safer routing. They simply attach to your router table or fence with the supplied T-bolts and provide extra support for the workpiece as it is being passed across the cutter. The amount of applied pressure is sustained...
€29.90
incl. VAT plus shipping costs
Article No. 706577
Switch Magnetic MagJig
Fits Magswitch Universal Mounting Base No. 711171 for self-construction of auxiliary e nd stops, featherboards, deflectors etc. For additional safety you should attach at least two magnets to each device.
€32.30
incl. VAT plus shipping costs
Article No. 711177
Magswitch Riser, 4-Piece Set
Four risers with a height of 24 mm, mounting screws included. Fits Magswitch Universal Mounting Base No. 711171 , Magswitch Workholding System Starter Package No. 711165 and Magswitch Pro Table Featherboard No. 711173 .
€12.50
incl. VAT plus shipping costs
Article No. 711176
Magswitch Universal Featherboard
A flat profile and featherboards on both sides for a more universal application. Can be used on both sides of a guide fence, on clockwise and counter-clockwise turning cutting edges, on ferromagnetic machine tables and parallel end...
€49.90
incl. VAT plus shipping costs
Article No. 711174
Magswitch Pro Table Featherboard
The position of the magnets on the back optimises the hold force, even on machine tables with milled T-tracks. Suitable for thicker materials. Contains two MagJig magnets, each with 68 kg hold force. Optional accessories extend the area...
€67.50
incl. VAT plus shipping costs
Article No. 711173
Magswitch Featherboard
Featherboard usable on both sides. On the left or right side of saw blades, on milling tables or machine end stops, on clockwise and counter-clockwise turning cutting edges. Fits Magswitch Universal Mounting Base No. 711171 and Magswitch...
€21.20
incl. VAT plus shipping costs
Article No. 711172
Magswitch Universal Mounting Base
The mounting base is the core of the Magswitch clamping system. Small dimensions enable the use on small metal surfaces. For attaching a variety of pressure devices such as Magswitch Featherboard No. 711172 Magswitch Vertical...
€26.30
incl. VAT plus shipping costs
Article No. 711171
Magswitch Universal Fence, 457 mm
A highly versatile fence made of a warp-resistant aluminium profile. Various T-tracks in the aluminium fence enable the use of diverse machine clamps, hold-down clamps, stoppers, etc. Four T-tracks on each side for tenon blocks and...
€52.70
incl. VAT plus shipping costs
Article No. 711170
Magswitch Thin Stock Guide
One side is a moulded step for holding down materials with a thickness of 3 mm, 6.3 mm, 9.5 mm (⅛, ¼ and ⅜ inch). A sloped side holds down any material thickness up to 24 mm. An adjustable roller offers additional pressing options,...
€24.90
incl. VAT plus shipping costs
Article No. 711169