€45.00
incl. VAT plus shipping costs
Article No. 704757
€129.00
incl. VAT plus shipping costs
Article No. 704709
€31.60
incl. VAT plus shipping costs
Article No. 704924
€12.60
incl. VAT plus shipping costs
Article No. 704926
Glardon/Vallorbe Habilis Files
Habilis files have slender square tangs which serve as handles, making them suitable for particularly delicate work. 60-64 HRC. Double cut. Cut 1.
€16.60
incl. VAT plus shipping costs
Article No. 704921
Glardon/Vallorbe Round Files
Highest precision files, cut extends right to the tip for finest work on saddles and bridges. Double cut.
€10.20
incl. VAT plus shipping costs
Article No. 705058
Glardon/Vallorbe Saddle Files
Precision files which cut on the rounded side faces only. For making grooves, e.g. finishing the saddles and bridges of stringed instruments.
€39.20
incl. VAT plus shipping costs
Article No. 705015
Glardon/Vallorbe Saddle Files, 4-Piece Set
Precision files which cut on the rounded side faces only. For making grooves, e.g. finishing the saddles and bridges of stringed instruments.
€139.00
incl. VAT plus shipping costs
Article No. 705019
Precision Hand Grinders NT
For fine work in making models and musical instruments, also suitable for deburring aluminium and plastic parts. Ideal for controlled removal of material in hard-to-reach areas, grinds in both directions. Sturdy die-cast aluminium...
€10.30
incl. VAT plus shipping costs
Article No. 705126
Concave Files
Concave file with cut on the inner side. Ultimate tool for finishing of ends of violin pegs, saddles etc. Rounded edges prevent from cutting into other near surfaces like fingerboard or pegbox while in use. Hand-cut with coarse cut for...
€59.90
incl. VAT plus shipping costs
Article No. 704916
Diamond Files, 5-Piece Set
200 grit, 5-piece set. Shapes and thicknesses: flat 1.5 mm half-round 2 mm round 3 mm square 3 mm triangular 3.5 mm
€18.70
incl. VAT plus shipping costs
Article No. 704934
Herdim Arching Templates, 4-Piece Sets
Set of three transversal arching and one longitudinal enable to replicate precisely the top or back arching of these instrument patterns. The templates replicate the positive part of the arching, leaving the edgework around the outline...
€12.30
incl. VAT plus shipping costs
Article No. 739450
Herdim Outline Templates, 2-Piece Set, Cello
The set contains all necessary templates for plate outline combined with ribs, scroll and f-hole.
€58.40
incl. VAT plus shipping costs
Article No. 739418
Herdim Fingerboard Projection Gauge
Precise tool with a digital reading to control and maintain one of the most important dimensions on a violin - the fingerboard projection. A precise value to be obtained in a second, works also with smaller sizes of violins and with all...
€78.70
incl. VAT plus shipping costs
Article No. 707004
Herdim Outline Templates, 5-Piece Set
The set contains all necessary templates for plate outline, rib-form outline, neck (scroll) template, f-hole template including the f-hole position and an outer corner form for detailed control on corner details.
€31.40
incl. VAT plus shipping costs
Article No. 739403
Herdim Contour Line Arching Templates
Contour line back and top arching templates derived digitally from respected instrument patterns. The contour lines start from the 5 mm line, leaving the edgework around the outline on the intent and imagination of the maker. The...
€32.50
incl. VAT plus shipping costs
Article No. 739440
Herdim Drilling Template for Double Bass Necks, 2-Piece Set
Drilling of the peg holes for machine heads is made easy using the Herdim drilling templates. The drill is guided through an 10 mm drilling bushing, which controls the squaring of the drilling axis against the peg box flanks. Fits all...
€45.50
incl. VAT plus shipping costs
Article No. 739419
Käfer Callipers
For measuring the wall thickness of musical instruments, claddings, hollow bodies and veneers etc. Robust cast-aluminium frame with precision dial gauge. Measuring range is 30 mm, display accuracy is 0.1 mm. A left-handed version is...
€249.00
incl. VAT plus shipping costs
Article No. 707101
Edging Calliper
Light and versatile calliper for easy shop measurements of plate-edge thicknesses in range of 0-20 mm with 0.1 mm step.
€17.90
incl. VAT plus shipping costs
Article No. 707094
String Projection Gauges
Measure over the fingerboard. The string projection is an essential indicator how precisely the instrument is set-up, especially the values by the upper saddle and lower fingerboard edge.
€99.90
incl. VAT plus shipping costs
Article No. 707001
Scale and Projection Gauge, Violin 4/4
A handsome gauge for quick and easy check of principal dimensions on the violin, checks the proper scale length and fingerboard projection. Both vital dimensions for playability of a violin. Useful for both teachers for checking an...
€9.50
incl. VAT plus shipping costs
Article No. 707009
Calliper, Jaw Depth 200 mm
The measuring pin is controlled from above to increase versatility, esp. useful for measuring instrument backs with the ribs attached. Measuring range 30 mm, resolution 0.1 mm, Käfer watch, Pin Head A, routed aluminum body.
€269.00
incl. VAT plus shipping costs
Article No. 707092
Calliper, Jaw Depth 300 mm
The measuring pin is controlled from above to increase versatility, esp. useful for measuring instrument backs with the ribs attached. Measuring range 30 mm, resolution 0.1 mm, Käfer watch, Pin Head A, routed aluminum body.
€278.00
incl. VAT plus shipping costs
Article No. 707090
MAG-ic Probe Thickness Gauge
A device for measuring thickness, can be operated by computer (Windows or Mac). Very easy operation with very reliable results. Downloadable software for thickness map creation, range 0-15 mm. Metric or inch units. Driver download, hints...
€373.00
incl. VAT plus shipping costs
Article No. 707144
Herdim Italian Rib Molds
Classical Italian style rib mold carefully derived from the famous instrument pattern and corresponding to other Herdim templates.
€41.80
incl. VAT plus shipping costs
Article No. 739462
Universal Bending Iron
For violin, viola, cello, gamba and guitar. Cast aluminium body mounted on a wooden base with asbestos-free insulation. Can be used in a vertical or horizontal position. Thermostat control. 230 V, 200 W, Ø 50 x 80 mm, 1.8 kg.
€320.00
incl. VAT plus shipping costs
Article No. 703920
Bending Strap for Bending Iron
For pressing the ribs against the bending iron. Made of highly flexible, 0.3 mm thick stainless steel fitted with a wire handle on each end.
€41.80
incl. VAT plus shipping costs
Article No. 703912
Bending Iron with Digital Temperature Control
Keeps the surface temperature of the heating body set within +/- 2 °C. Aluminium body with asbestos-free isulation. Mounting points for workbench mount provided on the body of the instrument.
€119.10
incl. VAT plus shipping costs
Article No. 703921
Herdim Profile Patterns, 6-Piece Set
Precision patterns for shaping bridges and fingerboards. The tapered spurs at the base of the bridge patterns are for gauging the string height. 6-piece set for violin, viola and cello made of stainless steel. Sizes according to Hans...
€47.50
incl. VAT plus shipping costs
Article No. 739400
Herdim Upper Nut Spacing Templates
Proper spacing of strings on the upper nut of the violin is a must, both from functional and esthetic point of view. Proper spacing involves correct and even outside gap from the fingerboard on both sides (G and E string) and even...
€5.30
incl. VAT plus shipping costs
Article No. 739425
Bridge Marker
For marking string divisions on a bridge quickly without using a pattern. Simply set the adjustment plate and press the bridge on the marker. Solid aluminum body, precision craftsmanship.
€109.40
incl. VAT plus shipping costs
Article No. 707000
Poster, Violin, Giuseppe Guarneri del Gesù, »Kreisler« 1733
These TheStrad posters are true-to-scale illustrations of historical instruments and can be used as templates to replicate them. The range includes the most famous Italian instruments by Giuseppe Guarneri and Antonio Stradivari, as well...
€28.50
incl. VAT plus shipping costs
Article No. 732001
Poster, Violin, Antonio Stradivari, »Titian« 1715
These TheStrad posters are true-to-scale illustrations of historical instruments and can be used as templates to replicate them. The range includes the most famous Italian instruments by Giuseppe Guarneri and Antonio Stradivari, as well...
€28.50
incl. VAT plus shipping costs
Article No. 732005
Poster, Violin, Antonio Stradivari, »Messiah« 1716
These TheStrad posters are true-to-scale illustrations of historical instruments and can be used as templates to replicate them. The range includes the most famous Italian instruments by Giuseppe Guarneri and Antonio Stradivari, as well...
€28.50
incl. VAT plus shipping costs
Article No. 732006
Poster, Viola, Antonio Stradivari, »Gustav Mahler« 1672
These TheStrad posters are true-to-scale illustrations of historical instruments and can be used as templates to replicate them. The range includes the most famous Italian instruments by Giuseppe Guarneri and Antonio Stradivari, as well...
€28.50
incl. VAT plus shipping costs
Article No. 732007
Patternmaker's Vice
This multipurpose vice is the most versatile clamping tool on the workbench. The solid grey cast iron construction is equipped with a parallel guide for the jaws that rotate to allow the clamping of pieces of any shape without damaging...
€144.00
incl. VAT plus shipping costs
Article No. 705755
Repair Holder, Violin, Viola
Aluminium framework mounted on an acrylic glass base, 28 x 35 cm. Lower bout clamp. Max. opening of body clamp 250 mm.
€143.00
incl. VAT plus shipping costs
Article No. 707010
Shaping Moulds for Tops and Backs
Traditional tool for simplify the work on the top and back. Heavy plywood base, 5 adjustable screws to hold the plate.
€54.00
incl. VAT plus shipping costs
Article No. 703931
Bow Rehairing Device
Traditional device for safe holding the bow during rehairing process. In length-adjustable tip holder, all holding devices cork padded for secure operation.
€104.00
incl. VAT plus shipping costs
Article No. 703933
Herdim Fretboard Guards, Guitar, 3-Piece Set
Supposed to be placed over fret which is being shaped, to work without worry of fretboard damage. The rubber band holds the guard in position, the rubber band being placed in the way, it does not interfere with the tools in use. Set of 3...
€9.50
incl. VAT plus shipping costs
Article No. 717098
Herdim Understring Radius Gauges, Guitar, 8-Piece Set
Indispensable when setting and adjusting the magnets of the pickups. The gauge, only 3 mm high at the measuring base, can be slipped under the strings without their removal. The spokes have identical radius on the top and bottom, so the...
€33.10
incl. VAT plus shipping costs
Article No. 717089
Herdim Radius Gauges, Notched, Guitar, 4-Piece Set
The gauge tailored for quick and accurate measurement of the fretboard base radius, without necessary removal of the strings. Laser cut from 1 mm stainless steel, the set of 4 gauges can measure radii 7.25", 9.5", 10", 12", 14", 15", 16"...
€34.70
incl. VAT plus shipping costs
Article No. 717087
Herdim Radius Gauges, Guitar, 2-Piece Set
Traditional templates for measuring of the curvature of the fretboard. Set of two covers radii 7.25", 9.5", 10", 12", 14", 15", 16" and 20". Laser cut from 1 mm stainless steel.
€20.90
incl. VAT plus shipping costs
Article No. 717088
Sintoms Fret Bender
Precisely pre-bent frets ease fretting and re-fretting, and help to maintain the job with an unmatchable accuracy. Heavy duty device, adjustable bending radius. Can be mounted on the workbench.
€129.00
Article No. 707030
Fretting Rulers, Guitar
Precise rulers for marking of fret positions on a guitar fretboard. After cutting a groove for the nut fret, the ruler is secured in the position and marks for frets are made in the precisely cut notches on both sides of the ruler....
€21.30
incl. VAT plus shipping costs
Article No. 707020
Diamond Honing Plates
Double-sided mini diamond plates for whetting, polishing and honing. Compact, light and flexible. For chamfering fret ends and levelling frets, especially on small plucked instruments, such as mandolins and ukuleles. 100 x 30 x 1 mm
€17.60
incl. VAT plus shipping costs
Article No. 704953
Fretboard Straight Edge, Notched, Guitar
Steel ruler with precisely milled and sanded notched ruler edge for guitar fretboard straightness detection. Long and short scale notch pattern covers majority of fretting patterns.
€40.60
incl. VAT plus shipping costs
Article No. 707014
Fretboard Straight Edge, Guitar
Steel ruler with precisely milled and sanded ruler edge for guitar fret and fretboard straightness detection.
€35.60
incl. VAT plus shipping costs
Article No. 707013