Musical instrument making

Find flip catalogue DICTUM Musical Intrument Making

Gluing Clamps, 6-Piece Set

Six clamping parts close the entire instrument, primarily for assembling new violin and cello. Laminated wood jaws lined with rubber cork plates, comfortable polished boxwood handles, stainless steel spindles and bushings.

€137.00

incl. VAT plus shipping costs

Article No. 705700

See details

Gluing Clamps, Boxwood

Jaws and handles made of finely polished boxwood. Nickel-plated spindles, handles with threaded bushings, jaws lined with rubber cork plates.

€4.90

incl. VAT plus shipping costs

Article No. 705706

See details

Replacement pad, yellow, for Herdim Cello Assembly Clamp

Replacement Pads for Herdim Cello Assembly Clamps

Inserts made of elastic PU leave no marks in the varnish or wood.

€1.00

incl. VAT plus shipping costs

Article No. 920146

See details

Replacement clamping pad, Violin, Viola, blue, with thread, with print "Herdim"

Replacement clamping pads for Herdim Violin, Viola Assembly...

Polyurethane clamping pads with brass-reinforced bushings.

€6.00

incl. VAT plus shipping costs

Article No. 800413

See details

Herdim Crack Clamp without Rubber Jaws, Jaw Opening 180 mm

Herdim Crack Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...

€44.90

incl. VAT plus shipping costs

Article No. 735812

See details

Herdim Repair Clamps

€19.00

incl. VAT plus shipping costs

Article No. 735720

See details

Herdim Lower Block Clamps

For gluing the ribs to the lower block without disassembling the instrument. Once inserted into the instrument, the steel pivot automatically flips into the cross position as the screw is turned. Hardwood body lined with cork.

€6.70

incl. VAT plus shipping costs

Article No. 735800

See details

Herdim Crack-Gluing Clamp

Small specialty tool for gluing cracks. Galvanized steel. (Can be tightened with a M2 hex wrench, not included). The blocks lining the crack are cut off after gluing. Opening 12 mm, Depth 5 mm.

€4.90

incl. VAT plus shipping costs

Article No. 705934

See details

Herdim Lining Clamp

For glueing of lining. Zinc-coated steel. Depth 15 mm, Ø 5 mm.

€5.70

incl. VAT plus shipping costs

Article No. 703202

See details

Herdim F-Hole Clamp, Jaw Opening 100 mm

€43.80

incl. VAT plus shipping costs

Article No. 735809

See details

Herdim Edge Clamp

For repairing cracks close to the edges. Exceptionally strong titanium coloured aluminum alloy body. Precision double guide rods, adjustable base height, direct pressure application upon closure.

€145.50

incl. VAT plus shipping costs

Article No. 705852

See details

Herdim Rib Corner Clamp, Violin, Viola (4 spindles)

Herdim Rib Corner Clamps

For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles.

€139.90

incl. VAT plus shipping costs

Article No. 735610

See details

Herdim Hand-Forged Repair Clamps, 7-Piece Set

The set contains one each of No. 735702 , 735704 , 735707 , 735714 , 735715 , 735718 and 735719 .

€239.00

incl. VAT plus shipping costs

Article No. 735754

See details

Herdim U-Shaped Crack Clamp, Jaw Depth 30 mm

Herdim U-Shaped Crack Clamps

The 4-screw system can be adjusted to any geometry of any crack. Even cracks which are significantly deformed can be brought back together by this versatile tool. Rubber padded plates and silicone pads (No. 820068 not included) enable...

€83.30

incl. VAT plus shipping costs

Article No. 735851

See details

Herdim Aluminium Crack Clamp, Violin, Viola, Jaw Opening 110 mm

Herdim Aluminium Crack Clamps

The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. The risk of chipping the edges when repairing a...

€43.30

incl. VAT plus shipping costs

Article No. 735830

See details

Herdim Aluminium Crack Clamps

€163.00

incl. VAT plus shipping costs

Article No. 735834

See details

Herdim 3-Arm Crack Clamp without Rubber Jaws, Jaw Opening 240 mm

Herdim 3-Arm Crack Clamps

€85.60

incl. VAT plus shipping costs

Article No. 735819

See details

Herdim Double-Sided Crack Clamp without Rubber Jaws, Jaw Opening 280 mm

Herdim Double-Sided Crack Clamps

€76.90

incl. VAT plus shipping costs

Article No. 735818

See details

Herdim F-Hole Clamp without Rubber Jaws, Jaw Opening 155 mm

Herdim F-Hole Clamps

€43.80

incl. VAT plus shipping costs

Article No. 735817

See details

Herdim Repair Clamps, 7-Piece Set

The set contains one each of No. 735720 , 735721 , 735722 , 735723 , 735724 , 735725 und 735726 . These clamps feature all requirements for repair clamps used on fine and fragile structures: High stiffness versus low weight - especially...

€149.10

incl. VAT plus shipping costs

Article No. 735730

See details

Herdim Neck Drilling Jig

A peghole bore either in a new violin or in one after bushing must be perfectly perpendicular to the longitudinal axis of the instrument. The drilling jig adopts both an instrument or single neck and ensures a perfect perpendicular...

€70.30

incl. VAT plus shipping costs

Article No. 703934

See details

Herdim Over the Rib Repair Clamp, Jaw Depth 122 mm

Herdim Over the Rib Repair Clamps

Some repairs as soundpost patch, opened seam and crack repair must be done on the back plate over the ribs. Clamping the cleats and patches is then, due to the rib height quite a tricky task. Using these over the rib steel clamps is an...

€41.60

incl. VAT plus shipping costs

Article No. 735731

See details

Herdim Holders for Peg Drilling

The unique template will guide drilling of the hole perfectly perpendicular and centered on the shaft of any peg.

€14.20

incl. VAT plus shipping costs

Article No. 730117

See details

Herdim Hand-Forged Repair Clamp, Jaw Depth 28 mm

Herdim Hand-Forged Repair Clamps

These traditional clamps, designed for the repair of musical instruments, are excellently suited to the construction of models thanks to their compact size. The two larger versions have a wide grip, and are therefore also used by...

€33.80

incl. VAT plus shipping costs

Article No. 735718

See details

Aluminium Repair Clamps

Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.

€18.90

incl. VAT plus shipping costs

Article No. 705890

See details

Aluminium Repair Clamps, 5-Piece Set

Low weight, torsion-resistant clamps made of hammer-finished, cast aluminium. Offset base, steel screw and ball-jointed swivel pad.

€105.00

incl. VAT plus shipping costs

Article No. 705894

See details

Silicone Protective Pad for Herdim Repair Clamps, Ø 12 mm

Silicone Protective Pads for Herdim Repair Clamps

High-quality soft silicone pads that are pulled over the movable pressure plate of repair clamps to optimally protect even the most sensitive varnished surfaces from marring. Fits Herdim Repair Clamps and Herdim Hand-Forged Repair Clamps.

€3.30

incl. VAT plus shipping costs

Article No. 820068

See details

Mini Parallel Clamp

Strong steel clamp for repairing cracks. Galvanised steel.

€14.80

incl. VAT plus shipping costs

Article No. 705723

See details

Edge Clamp

Brass, finely machined.

€10.50

incl. VAT plus shipping costs

Article No. 705856

See details

Top Clamps

For gluing down the top underneath the fingerboard, cork-lined aluminum clamping pad.

€85.80

incl. VAT plus shipping costs

Article No. 705820

See details

Fingerboard Pads

For an even distribution of clamping pressure when gluing fingerboards in place. Pads with cork lining to prevent risk of surface damage of the neck. The radiuses of both pads perfectly adjusted to the true radiuses of a violin neck and...

€9.80

incl. VAT plus shipping costs

Article No. 735810

See details

Steel Lining Clamp

High clamping pressure, plastic-lined jaws.

€4.30

incl. VAT plus shipping costs

Article No. 705861

See details

Rubber Cork Pads for Herdim Repair Clamps

Self-adhesive, 10 pieces.

€4.70

incl. VAT plus shipping costs

Article No. 735650

See details

Rubber Cork Pads

Delicate surfaces of fine musical instruments require cushioned clamping. Different sizes of these self adhesive 1 mm thick cork cushions offer versatility to cushion any conceiveable tool and clamp. Simple removing makes possible to...

€4.50

incl. VAT plus shipping costs

Article No. 735655

See details

Herdim String Lifter

Practical tools for exchanging, adjusting and fitting bridges. Designed to lift the tensioned strings of the existing bridge, allowing work to be done without risk of dropping the soundpost. The string lifter simultaneously marks the...

€24.80

incl. VAT plus shipping costs

Article No. 739501

See details

Bridge Leg Expander

To simulate string tension when fitting cello bridges. Gun-finished steel.

€15.60

incl. VAT plus shipping costs

Article No. 706900

See details

Herdim Forte Soundpost Setter, Violin, Viola

Herdim Forte Soundpost Setters

Made of stainless steel with rounded edges. Stiff but still bendable. The traditional, English-style head is ideal for making fine adjustments in the position of the soundpost. Excellent tapping power due to the hefty head. The rounded...

€18.10

incl. VAT plus shipping costs

Article No. 700122

See details