Grinders / Accessories

Tormek Diamond Grinding Wheel DE-200, Grit 1200

Diamond grinding wheel for a very fine finish. Ideal for carving gouges and knives. Incl. Tormek ACC-150 Anti-corrosion Concentrate (150 ml, No. 716077 ). It is advisable to use diamond grinding wheels for wet grinding only as this...

€214.00

incl. VAT plus shipping costs

Article No. 716011

See details

Klingspor Abrasive Belt CS 931 JF, 55 mm x 1020 mm

Particularly flexible, high-performance abrasive belt for the best sanding performance and very good on radii and edges. Long service life due to semi-open, self-sharpening ceramic coating, homogeneous surface result. The additional...

€7.70

incl. VAT plus shipping costs

Article No. 727309

See details

Tormek Multi Base MB-102

Base for sharpening on the side of diamond wheels No. 716078 , 716079 and 716080 for completely flat cutting-tool edges without hollow grind. The multi-holder is fully adjustable and allows optimal setting for each tool and each jig. The...

€81.30

incl. VAT plus shipping costs

Article No. 716081

See details

Tormek Drill Bit Sharpening Attachment DBS-22

Sharpening the complex tip geometry of a drill by hand requires plenty of practice. Using the Tormek drill bit sharpener attachment, you can now sharpen a 4-facet drill bit with the usual wet working sharpening method on your drill for...

€229.00

incl. VAT plus shipping costs

Article No. 705231

See details

Tormek Planer Blade Jig SVH-320

For blades of any length, minimum blade width 13 mm.

€184.00

incl. VAT plus shipping costs

Article No. 705207

See details

Tormek Turning Tool Setter TTS-100

For adjusting bevel angles of turning tools and chisels, independently of wheel diameter. Used in combination with jigs (SVD-186 R and SVS-50).

€28.20

incl. VAT plus shipping costs

Article No. 705237

See details

Tormek Multi Jig SVS-50

Universal jig for turning tools and carving gouges with straight and curved cutting edges and for skew and straight chisels.

€59.20

incl. VAT plus shipping costs

Article No. 705229

See details

Tormek Short Tool Jig SVS-38

For short gouges and V-blades. Blade length min. 45 mm, blade width max. 38 mm.

€24.50

incl. VAT plus shipping costs

Article No. 705239

See details

Tormek Moulding Knife Jig SVP-80

Sharpens all makes and shapes of profile knifes. Also for profiled paint removal blades suitable for Tormek T-8, T-7, T-4, T-3 and old series models. For profile knifes with 24, 30 or 38 mm distance between guide holes. Not suitable for...

€177.00

incl. VAT plus shipping costs

Article No. 705238

See details

Tormek Horizontal Base XB-100

For Tormek T-7 and T-3.

€29.40

incl. VAT plus shipping costs

Article No. 705226

See details

Tormek Universal Support US-103 for T-3 and T-4 Original

With fine adjustment suitable for Tormek T-3, T-4 Original and old series models.

€44.90

incl. VAT plus shipping costs

Article No. 705202

See details

Tormek Universal Support US-105 for T-7

With fine adjustment suitable for Tormek T-7, T-8 and old series models.

€41.90

incl. VAT plus shipping costs

Article No. 705206

See details

Tormek Pro Angle Master WM-200

For setting the grinding angle and checking the bevel geometry. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.

€29.30

incl. VAT plus shipping costs

Article No. 705240

See details

Tormek Sharpening Station (TS-740)

This robust sharpening station offers not just a sharpening table but also storage space for the Tormek sharpening jigs and accessories. You can adjust the working height to fit your exact size. This allows full control over sharpening,...

€799.00

incl. VAT plus shipping costs

Article No. 705233

See details

Tormek Gouge Jig SVD-186 R

For turning tools and hollow gouges, as well as interchangeable cutters for hollowing tools etc., up to 36 mm wide. Adjustable in cutting angle and shape.

€92.60

incl. VAT plus shipping costs

Article No. 716033

See details

Tormek Woodturner's Kit TNT-808

Includes: Gouge Jig (SVD-186 R) Multi Jig (SVS-50) Tool Rest (SVD-110) Profiled Leather Honing Wheel (LA-120) Turning Tool Setter (TTS-100) Dust Cover for Tormek Sharpening System (MH-380) Instruction box for woodturners (in English)...

€328.00

incl. VAT plus shipping costs

Article No. 705454

See details

Tormek Universal Support, Extended US-430

Extended Universal Support for sharpening long tools, such as knives or machetes. Micro adjust with scale for precise setting. Suitable for Tormek T-8, T-7, T-4 and older series models.

€86.90

incl. VAT plus shipping costs

Article No. 716058

See details

Tormek Case TC-800

The Tormek Case keeps your devices and accessories neatly stored, stackable and easy to carry thanks to the premium leather handle. Fits inserts HTK-00 (No. 716191 ), TNT-00 (No. 716192 ) and T8-00 (No. 716193 ).

€60.60

incl. VAT plus shipping costs

Article No. 716190

See details

Tormek Insert for Hand Tool Kit HTK-806

The HTK-00 insert can be used to store all the devices included in the Hand Tool Kit (No. 705223 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).

€26.00

incl. VAT plus shipping costs

Article No. 716191

See details

Tormek Insert for Woodturner's Kit TNT-808

The TNT-00 insert can be used to store all the devices included in the Woodturner's Kit (No. 705454 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).

€26.00

incl. VAT plus shipping costs

Article No. 716192

See details

Tormek Insert for T-8 Original Accessories T8-00

The T8-00 insert can be used to store all the devices of the Tormek T-8 Original (No. 716034 ). Suitable for Tormek Case TC-800 (No. 716190 ) and Tormek Sharpening Station T-740 (No. 705233 ).

€24.00

incl. VAT plus shipping costs

Article No. 716193

See details

Tormek CW-220 Composite Honing Wheel

The composite honing wheel has an integrated polishing agent and is easy to handle. An advantage over the leather honing wheel is that the composite wheel can be used in clean environments and no honing paste has to be applied.

€89.90

incl. VAT plus shipping costs

Article No. 716194

See details

Tormek Main Shaft Set

For easier fitting of the grinding stones the main shaft is now supplied with a left-hand thread. The new EzyLock nut can be tightened by hand and securely clamps the stone. Set consists of main shaft with left-hand thread, EzyLock nut,...

€47.80

incl. VAT plus shipping costs

Article No. 800500

See details

Main Shaft Bearing for Tormek Supergrind 2000 / 1200

Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.

€9.20

incl. VAT plus shipping costs

Article No. 800010

See details

Tormek Replacement Leather For Profiled Leather Honing Wheel...

Special profile with 2 mm radius on big disc and 45° angle on small disc. Fits for Nr. 705227 Tormek profiled leather honing wheel (LA 120). Narrow profile 2 mm.

€36.20

incl. VAT plus shipping costs

Article No. 705448

See details

Tormek Replacement Leather Wheel

€50.90

incl. VAT plus shipping costs

Article No. 705197

See details

Tormek Settling Disc

Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.

€17.00

incl. VAT plus shipping costs

Article No. 800034

See details

Tormek Settling Disc

Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.

€4.30

incl. VAT plus shipping costs

Article No. 800035

See details

Tormek Drive Wheel with Rubber Band

Fits current and old series models.

€36.20

incl. VAT plus shipping costs

Article No. 800008

See details

Tormek Water Container AWT-250

Suitable for Tormek T-7 and old series models.

€36.20

incl. VAT plus shipping costs

Article No. 705216

See details

Tormek Diamond Tip ADV D 50

For the diamond stone dresser. Grinding jigs and accessories are suitable for all models (T-3, T-4, T-7 and T-8) unless otherwise noted.

€41.90

incl. VAT plus shipping costs

Article No. 705217

See details

Plastic bearing

Fits No. 705228 , 705236 and 705247 .

€3.30

incl. VAT plus shipping costs

Article No. 800012

See details

Tormek Driving Wheel Safety Lock Pin

Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.

€3.50

incl. VAT plus shipping costs

Article No. 800037

See details

Tormek Knurled Screw Sharpening Wheel

Suitable for Tormek T-7, T-8 and old series models.

€22.40

incl. VAT plus shipping costs

Article No. 800038

See details

Tormek Eyelet M12, H4 at Drive Wheel

Suitable for Tormek T-7, T-8 and old series models.

€5.60

incl. VAT plus shipping costs

Article No. 800039

See details

Tormek Eyelet for Cover No. 800040

Suitable for Tormek T-3, T-4, T-7 and old series models.

€7.60

incl. VAT plus shipping costs

Article No. 800042

See details

Tormek Adjustable Cover for Rest

Suitable for Tormek T-7 and old series models.

€28.30

incl. VAT plus shipping costs

Article No. 800040

See details

Tormek Wedge, Universal Rest

Suitable for Tormek T-3, T-4 and old series models.

€6.60

incl. VAT plus shipping costs

Article No. 800045

See details

Tormek Cover

€5.20

incl. VAT plus shipping costs

Article No. 800047

See details

Knurled Nut for Tormek

Fits Tormek T-3, T-4, T-7 and T-8.

€15.00

incl. VAT plus shipping costs

Article No. 800343

See details

Knurled Screw fastening Rest for Tormek

Suitable for Tormek T-3, T-4, T-7, T-8 and old series models.

€7.10

incl. VAT plus shipping costs

Article No. 800041

See details

Tormek Water Container WB-200

Suitable for Tormek T-3, T-4 and old series models.

€18.20

incl. VAT plus shipping costs

Article No. 705241

See details

Switch for Tormek

The switch is available in two types - depending on the year the machine was built, as a toggle switch or a button switch. Check whether a toggle switch no. 800046 or a button switch no. 8000504 is installed on your machine. You must...

€50.90

incl. VAT plus shipping costs

Article No. 800504

See details

Scraper for Water Container, Tormek T-8 Original

For cleaning the water container of the Tormek T-8 Original.

€10.90

incl. VAT plus shipping costs

Article No. 800673

See details

Tormek Water Container R3090

Suitable for Tormek T-8.

€36.80

incl. VAT plus shipping costs

Article No. 800672

See details

Sorby ProEdge Grinding Jig for Gouges

This V-shaped jig is laid on the Sorby ProEdge support table and guarantees perfect guidance when sharpening gouges.

€41.90

incl. VAT plus shipping costs

Article No. 720390

See details

Sorby ProEdge Grinding Jig, 45° for Skew Chisels

This jig is placed onto the Sorby ProEdge support table. It allows you to grind a 45° angle without time-consuming angle setup and measurement.

€31.10

incl. VAT plus shipping costs

Article No. 720392

See details

Sorby ProEdge Grinding Jig, 90° for Plane Blades and Chisels

This guide makes it possible to grind a precise 90° angle on a blade. The two slot holes in the stopper fastening also make it possible to modify the 90° angle. This provides greater flexibility with the type of bevel and for the shape...

€31.30

incl. VAT plus shipping costs

Article No. 720393

See details

2 of 5