Base Plate for DICTUM Double-wheeled Grinder
Matching base plate to connect the Wolverine sharpening system to the DICTUM Low-speed Grinder DS 150 L. The Oneway Wolverine sharpening system (No. 702170 ) was specially developed for sharpening woodturning tools. On double-wheeled...
€39.90
incl. VAT plus shipping costs
Article No. 731699
Hattori Angle Jig for Chisels and Plane Blades
Gauge with 14 angles for checking tool cutting edges. The sizes of the angle notches are particularly suitable for chisels and plane blades. An engineer's corner at the base of each slot ensures full contact when checking a bevel and...
€28.90
incl. VAT plus shipping costs
Article No. 714676
DICTUM Polishing and Honing Paste
Ideal for honing knife and tool blades. Effective and gentle removal of the burr in combination with e.g. leather honing wheels or strops. Cleans and polishes metal parts, gives a brilliant shine and protects surfaces from weathering....
€9.50
(Content: €118.75 / 1 kg)
incl. VAT plus shipping costs
Article No. 705055
DICTUM Plane Blade Jig SHV-77
This variable grinding jig for plane blades up to max. 77 mm width can be tilted +/- 5° by means of additional adjusting screws. This allows plane blades to be fixed and sharpened at precise angles. By turning back both adjusting screws,...
€39.90
incl. VAT plus shipping costs
Article No. 721051
Adaptor Flange with Precision Disc, Bore 12.7 mm
The flange reduces the 32 mm standard bore of the grinding wheels to the 12.7 shaft diameter. It ensures an extremely smooth-running wheel in both axial and radial directions, and even better grinding results. Made in steel.
€12.90
incl. VAT plus shipping costs
Article No. 820908
DICTUM Universal Jig 90° SU-77
For straight cutting edges such as plane blades, chisels and paring chisels. A fence aligns the clamped blades at a 90° angle. Clamping width max. 77 mm. Suitable for sharpening machines with guide rod diameter 12 mm.
€24.30
incl. VAT plus shipping costs
Article No. 721037
DICTUM Diamond Grinding Wheel Dresser
Before using a new grinding wheel and when dealing with uneven and worn-out grinding wheels, it is important to true them. This process ensures that new wheels have precise concentricity (new wheels often run slightly eccentrically), and...
€54.90
incl. VAT plus shipping costs
Article No. 729884
DICTUM Stone Grader
The stone grader can be used to change or influence the grit of your grinding wheel. A 220 grit grinding wheel can be changed to a fine grit of approx. 1000 by pressing the fine side of the stone grader onto the running wheel. To reset...
€19.90
incl. VAT plus shipping costs
Article No. 721040
Setting Gauge for Sharpening Guides, Basic
For setting the bevel angles for sharpening guides on water-cooled grinders or double-wheeled grinders. The grinding wheel diameter and the desired bevel angle are set on the gauge and then transferred to the chisel or plane blade...
€19.90
incl. VAT plus shipping costs
Article No. 721043
Leather Honing Wheel for DICTUM Water-cooled Grinder
After sharpening the blades on the grinding wheel, you can switch to a leather honing wheel. In combination with the Polishing and Honing Paste (No. 705055 ), this removes burrs quickly and reliably and leaves a perfectly polished edge....
€34.90
incl. VAT plus shipping costs
Article No. 830592
Water Deflector for DICTUM Water-cooled Grinder
The water deflector has two magnets and is simply attached to the side plate of the wet grinding machine. Dripping water that falls onto the housing, especially when processing wide blades, is thus drained off via the side plate into the...
€16.90
incl. VAT plus shipping costs
Article No. 714570
€12.90
incl. VAT plus shipping costs
Article No. 714579