Reducer Rings, Pair
For reducing the bore diameter of grinding and polishing wheels. Made of plastic.
€2.00
incl. VAT plus shipping costs
Article No. 729027
DICTUM Short Tool Jig SW-36
For short carving blades, hollow gouges and V-parting tools or small woodturning gouges A plastic cap on the pressure screw avoids pressure marks on the tools. Clamping width max. 36 mm.
€15.50
incl. VAT plus shipping costs
Article No. 721041
DICTUM Universal Tool Rest STU-110
Support table for sharpening flat cutting edges such as flat chisels and scraper blades, parting tools and inshaves. The 107 x 88 mm support enables a wide range of tools to be guided safely. Suitable for sharpening machines with guide...
€17.90
incl. VAT plus shipping costs
Article No. 721044
CBN Grinding Pin Ø 15 mm, B126
The cylindrical shape of this CBN grinding pin is ideal for grinding bore holes, radii and contours, and for resharpening carving and hook knives by hand with a flexible shaft or drill. CBN coating around the circumference and on the...
€12.90
incl. VAT plus shipping costs
Article No. 704942
Grinding Disc
For mounting on the right-hand shaft of the polishing motor. Velcro disc with mandrel. For machine shafts with diameter 10 mm.
€7.90
incl. VAT plus shipping costs
Article No. 728804
€2.30
incl. VAT plus shipping costs
Article No. 729775
€6.90
incl. VAT plus shipping costs
Article No. 729454
Werkzeugauflage für DICTUM Doppelschleifer DS 150 S
Fits Double-wheeled Grinder DS 150 S (No. 720795 ). Incl. mounting screws.
€9.30
incl. VAT plus shipping costs
Article No. 830407
Werkzeugauflage für DICTUM Langsamläufer DS 150 L
Suitable for Low-speed Grinder DS 150 L (No. 720782 ). Incl. mounting screws.
€9.30
incl. VAT plus shipping costs
Article No. 830415
Sichtschutz, Set
Protective screen without magnifying glass. Incl. mounting screws. Fits Low-speed Grinder DS 150 L (No. 720782 ) and Double-wheeled grinder DS 150 S (No. 720795 ).
€4.90
incl. VAT plus shipping costs
Article No. 830418
Base Plate for DICTUM Double-wheeled Grinder
Matching base plate to connect the Wolverine sharpening system to the DICTUM Low-speed Grinder DS 150 L. The Oneway Wolverine sharpening system (No. 702170 ) was specially developed for sharpening woodturning tools. On double-wheeled...
€39.90
incl. VAT plus shipping costs
Article No. 731699
Hattori Angle Jig for Chisels and Plane Blades
Gauge with 14 angles for checking tool cutting edges. The sizes of the angle notches are particularly suitable for chisels and plane blades. An engineer's corner at the base of each slot ensures full contact when checking a bevel and...
€28.90
incl. VAT plus shipping costs
Article No. 714676