York Ball Head Vice
Thanks to a ball-joint, this solid vice can rotate through three axes. The position can be set to meet the specific demands of the workpiece, the two knob handle screws allow for quick and secure fastening. The base plate can be fastened...
€109.70
incl. VAT plus shipping costs
Article No. 705826
York Heavy Vice
Robust, high-quality vice in GJL30 cast iron for high compressive stress. The trapezoidal thread spindle is fitted inside the precise roller guide, so it stays protected against damage and dirt. The integrated, removable rotary plate...
€129.00
incl. VAT plus shipping costs
Article No. 716270
York Clamp Vice
The bench clamp, which doubles up as a rotary plate, is used to quickly and conveniently attach the handy and rugged vice to all bench surfaces up to 75 mm thick. It is therefore ideal for mobile use. The trapezoidal thread spindle...
€82.00
incl. VAT plus shipping costs
Article No. 716269
»Vice Rack Stop« Clamping Aid for Front Vice
This practical clamping aid prevents front vices from jamming when clamping e.g. battens on one side. It keeps the jaws parallel when clamping and thus avoids the risk of damaging the workpiece or jaws. Simply take as many of the 2.5 mm...
€17.90
incl. VAT plus shipping costs
Article No. 715642
Veritas T-Track Swivel Stop
This support is designed especially for round and irregular shapes. You can attach your own stops to the support via two drill holes and fix them in the required position. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€16.60
incl. VAT plus shipping costs
Article No. 703903
Veritas T-Track (without Scale), 915 mm
T-Track for attaching a self-made stop (without scale). On the bottom of the T-Track you will find a small groove, through which you can drill holes at the required distances to attach your self-made stop. The Veritas length stop can be...
€23.90
incl. VAT plus shipping costs
Article No. 703899
Veritas T-Track Stop
For securing boards and flat workpieces. This stop, suitable for Veritas T-Track, is designed to be positioned side-on and is therefore ideal for optimal working on workpiece surfaces. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€10.10
incl. VAT plus shipping costs
Article No. 703902
Veritas T-Track Hold-down Clamp
For clamping standing corner angles up to 6 cm high. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€15.90
incl. VAT plus shipping costs
Article No. 703900
Veritas T-Track Clamp
This clamp can secure boards up to 5 cm thick. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€23.10
incl. VAT plus shipping costs
Article No. 703901
Veritas T-Track 915 mm, with Angular Stop
T-Track with two different profiles for easily fitting to a self-made worktop. The T-Track is easy to attach to the worktop via the 19 mm-wide lip. When using a 15 mm-thick worktop, the T-Track can be screwed flush to its surface. The...
€23.90
incl. VAT plus shipping costs
Article No. 703898
Veritas Universal T-Track, 920 mm
All-purpose T-track for flexible use with a T-track section on each side. The T-track can be used for all types of routing jigs, clamping boards and auxiliary devices. Bar cross-section external dimensions 38 x 18 mm, T-section 1;...
€24.60
incl. VAT plus shipping costs
Article No. 703906
UJK Reamer for 20 mm Bench Dog Holes
For precise work it is essential that accessories fit accurately into the multifunctional table’s hole grid. Depending on the tabletop material, a change in wood moisture content or protruding wood fibres can cause the accessories to...
€28.50
incl. VAT plus shipping costs
Article No. 730847