Front Vice Guide, Heavy Cast Version
The extremely robust and torsion-resistant vice mechanism is designed in such a way that even pressure is exerted over the entire width of the vice, even when you clamp workpieces in one jaw end only and with maximum pressure. This...
€198.00
incl. VAT plus shipping costs
Article No. 740224
Tail Vice Guide
Robust and wear-resistant tail vice used by most renowned workbench manufacturers. The backlash-free and preset all-steel guide is easy to install. Max. opening 210 mm, extra-strong 28 mm spindle Ø, opening for vice handles 27 mm....
€153.00
incl. VAT plus shipping costs
Article No. 740225
Extended Cover for Veritas Twin-Screw Vice
Expands the maximum spacing of your Veritas Twin-Screw Vice (No. 705816 ) to 610 mm. Comes with a longer chain (1350 mm). Without front and rear cover endpieces.
€44.00
incl. VAT plus shipping costs
Article No. 705851
Heavy Bench Vices
Solid metal vice enables exact and strong clamping on the workbench. The grey cast iron jaws run on two 25 mm strong steel guide rods virtually free of play. The 24 mm strong, precisely milled spindle has asymmetrically shaped threads to...
€99.00
incl. VAT plus shipping costs
Article No. 705806
Lake Erie Toolworks Wagon Vice, Premium
The wagon vice is a rear vice in which the runner is guided in a groove. Using the runner, the workpiece is either clamped directly or using a bench hook. The handle provided has a screw thread on both sides to allow it to be dismantled...
€329.00
incl. VAT plus shipping costs
Article No. 706174
Lake Erie Toolworks Wood Shoulder Vice, Standard
The principle of the shoulder vice is basically that of a rear vice, but which clamps vertically to the longitudinal edge of the workbench. The clamping runner does not travel to the side as is common in rear vices, but instead towards...
€276.00
incl. VAT plus shipping costs
Article No. 706176
Compact Double-Spindle Front Vice, Heavy Cast Version
The compact design enables quick and easy assembly. The robust mounting plate guarantees a warp-resistant vice mechanism for parallel clamping and even pressure across the entire vice surface. The spindle gap of 210 mm also allows for...
€262.00
incl. VAT plus shipping costs
Article No. 740227
Moxon Vice Spindle Set
Spindle set for a mobile collet chuck. Joseph Moxon first described and demonstrated this type of vice in his book »Mechanick Exercises« in 1703. These very simple yet enormously useful double-spindle clamps provide the following...
€129.90
incl. VAT plus shipping costs
Article No. 716278
Lake Erie Toolworks, Moxon Vice
The Moxon Vice is a fitted front vice. It can be clamped to any workbench. It has also a very flexible working height and can be individually adjusted for an ergonomic posture. Maximum possible clamping width 105 mm. Clearance between...
€193.00
incl. VAT plus shipping costs
Article No. 706175
Lake Erie Toolworks Wood Vice Screw, Basic
This basic set contains the key components for all popular front vice types (leg vice, twin vice, face vice). However, it is also suitable for developing a wide range of custom wooden screw thread designs.
€180.00
incl. VAT plus shipping costs
Article No. 706177
Lake Erie Toolworks Wood Vice Screw Premium
This premium set contains the main components for all popular front vice types (leg vice, twin vice, face vice). The handle provided has a screw thread on both sides to allow it to be dismantled again later on. The ends of the handle are...
€252.00
incl. VAT plus shipping costs
Article No. 706173
Hold-down Clamp
Quickly fastens all types of workpieces to the joiner’s bench top. The rod of the cast ductile iron clamp is slipped into a drill hole, self-locking mechanism.
€12.20
incl. VAT plus shipping costs
Article No. 705756