DICTUM Carving Support
Rugged high-quality carving support made of steamed beech. The support is clamped into your workbench vice, thus provides safe and ergonomic working conditions for all kinds of sculpting projects. The working position can be set flexibly...
€99.00
incl. VAT plus shipping costs
Article No. 701047
Adapter Bolt for DICTUM Mounting Post SSP
The adapter is fixed to the multi-hole plate instead of the threaded column. This allows toggle lever clamps, push rod clamping devices and other quick-action clamps to be positioned on perforated plates with 20 mm holes. The adapter has...
€5.90
incl. VAT plus shipping costs
Article No. 728992
Klemmsia Hold-down Clamp Adapter, Basic, Shaft 19 mm
The body of the hold-down clamp is the same as that of the Klemmsia clamps. It can be used for clamping down workpieces or converted into a standard clamp by means of the attached screw mechanism in the perforated stud system. It can...
€41.90
incl. VAT plus shipping costs
Article No. 708125
€7.80
incl. VAT plus shipping costs
Article No. 708129
Klemmsia Clamping Arm 90°, Throat Depth 110 mm
Maximum clamping force at 90° position of the eccentric lever. Fits No. 708125 , 708126 , 708127 , 708128 , 708133 .
€9.90
incl. VAT plus shipping costs
Article No. 708159
€5.50
incl. VAT plus shipping costs
Article No. 708132
Standard Bench Vice
Metal vice with double guide tracks, trapezoidal thread and extendable bench dog. Screwed to the bottom of the bench plate (installation height 60 mm), jaw drill holes for fastening wooden blocks.
€64.90
incl. VAT plus shipping costs
Article No. 705768
Veritas Twin-Screw Vice
This vice allows you to clamp workpieces anywhere in the vice while the jaws stay parallel. The chain drive ensures parallelism and virtually eliminates the racking common in other vices. The vice can be operated using either handle. A...
€272.00
incl. VAT plus shipping costs
Article No. 705816
Installation Kit for Lie-Nielsen Tail Vice
For mounting the Lie-Nielsen tail vice No. 705733 .Kit includes: 2 drills (1/4" und 5/16"), 2 taps (5/16-18 and 3/8-16), 2 transfer punches (Ø 3/8" and 5/16"), 4 hex keys (1/8", 3/16", 7/32" and 1/4"), 3 hex drivers (3/16", 7/32" and...
€30.90
Article No. 705734
End Support for Front Vice Guide Rods
With an end support that connects the two guide rods of the front vice mechanism, you can precisely adjust the parallel position of the jaw to the bench apron. If the font vice warps, you can restore parallelism with the end support. You...
€39.70
incl. VAT plus shipping costs
Article No. 740223
Setscrew for Vice Jaw
A setscrew inside the vice allows counterpressure when clamping one side only and prevents the jaw from tilting.
€23.90
incl. VAT plus shipping costs
Article No. 740222
Front Vice Guide
Solid and robust front vice mechanism for installing in self-made workbenches. Also suitable for modifying or retrofitting existing benches. To ensure parallelism, we recommend installing an end support No. 740223 . Screw length 410 mm,...
€120.40
incl. VAT plus shipping costs
Article No. 740221