Herdim® F-Hole Clamp, Jaw Opening 100 mm
Product no.:
735809
Brand:
Herdim
€43.80 €36.81
per piece(s)
In stock, delivery time approx. 3-5 working days
- Clamping capacity 100 mm
- Instrument Violin, Viola
- Jaws without Rubber Jaws
- Material Brass, Aluminium
Description
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a jaw width of 280 mm will weigh 100 g, this design with aluminum clamping jaws and screw heads only weighs 82 g. Rubber padded plates of the levelling screws as well as rubber jaws reduce the risk of damage of the repaired instruments. European origin ensures durability, precise and flawless action.
With two thin pads, for cracks between the f-holes. Applied between the f-holes.
- Significantly reduced weight
- Rubber jaws and levelling pads to prevent damage
- Durability and precise action
With two thin pads, for cracks between the f-holes. Applied between the f-holes.
Herdim® Crack Clamps
These clamps are ideal for repairing cracks in stringed instrument tops and backs. Their low weight, which results from the aluminium clamping pads and thumbscrews, and their adjustable jaw opening allow a large array of applications in the restauration of stringed instruments.
The movable clamping jaw (1) can be easily set to the desired length. The clamping pad (2) is concave on one side and convex on the other and pivots to accommodate the exact contours of the instrument. The sliding jack screws (3) allow the crack to be leveled without the use of additional wedges. The double brass rods (4) are flexible and can be shaped to conform to the curvature of the instrument being restored. Brass jack screws with rubber padded plates. Clamping pads and thumbscrews made of aluminium.
Crack clamps with rubber jaws minimize slipping and possible damages to the fine edgework of the instruments. The use of rubber jaws makes this tool safe and even more usable for all precise restoration purposes.
The movable clamping jaw (1) can be easily set to the desired length. The clamping pad (2) is concave on one side and convex on the other and pivots to accommodate the exact contours of the instrument. The sliding jack screws (3) allow the crack to be leveled without the use of additional wedges. The double brass rods (4) are flexible and can be shaped to conform to the curvature of the instrument being restored. Brass jack screws with rubber padded plates. Clamping pads and thumbscrews made of aluminium.
Crack clamps with rubber jaws minimize slipping and possible damages to the fine edgework of the instruments. The use of rubber jaws makes this tool safe and even more usable for all precise restoration purposes.
Properties
| Clamping capacity: | 100 mm |
|---|---|
| Instrument: | Violin, Viola |
| Jaws: | without Rubber Jaws |
| Material: | Brass, Aluminium |
Properties
| Clamping capacity: | 100 mm |
|---|---|
| Instrument: | Violin, Viola |
| Jaws: | without Rubber Jaws |
| Material: | Brass, Aluminium |
Similar items
Ähnliche Artikel
