Japanese Socks »Gunsoku«, 1 Pair
For Jika-Tabi (No. 707670 , 707671 , 707672 , 707673 , 707674 , 707675 , 707676 , 707677 and 707678 ) and Japanese rubber boots (No. 707662 , 707663 , 707664 and 707665 ). Elastic cotton fabric, reinforced heel and toes. One size,...
€7.80
incl. VAT plus shipping costs
Article No. 707615
FHB »Alma« Ladies Work Trousers
Work trousers for everyday use in the workshop made of hard-wearing blended fabric. Due to the elastic side gussets, the high-cut waistband at the back and the well thought-out comfort pleats in the knee area, these work trousers allow...
€81.70
incl. VAT plus shipping costs
Article No. 824721
FHB »Florian« Men’s Work Trousers
Work trousers for everyday use in the workshop made of hard-wearing blended fabric. Due to the elastic side gussets, the high-cut waistband at the back and the well thought-out comfort pleats in the knee area, these work trousers allow...
€82.60
incl. VAT plus shipping costs
Article No. 824687
FHB »Justus« Men's Softshell Vest, Beige/Black
Comfortable softshell vest for outdoor work. Suitable for all weather conditions, extremely water-repellent, windproof and breathable. Softshell is stretchy and cosy and thus ensures a lot of freedom of movement. Details such as the...
€78.30
incl. VAT plus shipping costs
Article No. 824651
FHB »Theo« Men's Bermuda Shorts, Olive/Black
With their large pockets, these shorts are perfectly equipped for demanding work. Due to the elastic side gussets and the high-cut waistband at the back, these work trousers allow for plenty of freedom of movement. Belt loop spacing...
€61.50
incl. VAT plus shipping costs
Article No. 824733
FHB »Wulf« Men's Bermuda Shorts, Beige/Black
The pleasantly lightweight yet hard-wearing blended fabric is ideal for high outdoor temperatures in everyday workshop use. Due to the elastic side gussets and the high-cut waistband at the back, these work trousers allow for plenty of...
€69.30
incl. VAT plus shipping costs
Article No. 824740
ToughBuilt Waterproof Knee Pads
These knee pads are the versatile solution for wet and dirty jobs, from laying concrete to gardening. The pliable outer shell protects the knee on rough terrain while preventing scratches on the most delicate surfaces. Closed cell,...
€29.90
incl. VAT plus shipping costs
Article No. 714744
Taper Wiper
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€8.20
incl. VAT plus shipping costs
Article No. 704262
Veritas T-Track Swivel Stop
This support is designed especially for round and irregular shapes. You can attach your own stops to the support via two drill holes and fix them in the required position. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€16.60
incl. VAT plus shipping costs
Article No. 703903
Veritas T-Track (without Scale), 915 mm
T-Track for attaching a self-made stop (without scale). On the bottom of the T-Track you will find a small groove, through which you can drill holes at the required distances to attach your self-made stop. The Veritas length stop can be...
€23.90
incl. VAT plus shipping costs
Article No. 703899
Veritas T-Track Stop
For securing boards and flat workpieces. This stop, suitable for Veritas T-Track, is designed to be positioned side-on and is therefore ideal for optimal working on workpiece surfaces. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€10.10
incl. VAT plus shipping costs
Article No. 703902
Veritas T-Track Hold-down Clamp
For clamping standing corner angles up to 6 cm high. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€15.90
incl. VAT plus shipping costs
Article No. 703900
Veritas T-Track Clamp
This clamp can secure boards up to 5 cm thick. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€23.10
incl. VAT plus shipping costs
Article No. 703901
Veritas T-Track 915 mm, with Angular Stop
T-Track with two different profiles for easily fitting to a self-made worktop. The T-Track is easy to attach to the worktop via the 19 mm-wide lip. When using a 15 mm-thick worktop, the T-Track can be screwed flush to its surface. The...
€23.90
incl. VAT plus shipping costs
Article No. 703898
Veritas Universal T-Track, 920 mm
All-purpose T-track for flexible use with a T-track section on each side. The T-track can be used for all types of routing jigs, clamping boards and auxiliary devices. Bar cross-section external dimensions 38 x 18 mm, T-section 1;...
€24.60
incl. VAT plus shipping costs
Article No. 703906
Underframe for DICTUM Multifunction Table
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,131.00
incl. VAT plus shipping costs
Article No. 707796
Groz Drill Press Vice, UG75
This lightweight drill press vice with a prism jaw and a smooth, laterally guided jaw is used for secure clamping and fixing of workpieces on bench and pillar drills. Both jaws have support surfaces for clamping flat workpieces. In...
€49.70
incl. VAT plus shipping costs
Article No. 714521
Woodpeckers »VaryAngle« Clamping Fixture, Leg Length 80 mm
The VaryAngle clamping devices are practical aids for aligning polygonal frames, assembling joints with variable angles , or for constructing adjustable auxiliary devices on the machine table. Three separate clamping devices are required...
€33.80
incl. VAT plus shipping costs
Article No. 704390
UJK Reamer for 20 mm Bench Dog Holes
For precise work it is essential that accessories fit accurately into the multifunctional table’s hole grid. Depending on the tabletop material, a change in wood moisture content or protruding wood fibres can cause the accessories to...
€28.50
incl. VAT plus shipping costs
Article No. 730847
UJK Parf Anchor Dogs, 18 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€20.90
incl. VAT plus shipping costs
Article No. 715434
UJK Parf Anchor Dogs, 32 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€24.00
incl. VAT plus shipping costs
Article No. 730845
In-line Clamp
Clamp with rack feed, made of anodised aluminium. The large rotary wheel enables fine and sensitive pressure regulation. Equipped with a replaceable plug-in pin on the underside, it is fixed in the dog holes of workbenches or...
€74.90
incl. VAT plus shipping costs
Article No. 714637
Clamping Sleeve Adapter for Piher Mini Quick
The clamping sleeve for 20 mm holes allows the Mini Quick one-handed clamp to be used as an insertion clamp or horizontal clamping element on e.g. multifunction tables. Insertion clamp: Remove the fixed bracket of the Mini Quick...
€28.30
incl. VAT plus shipping costs
Article No. 730094
Slot Nut M8, 2 Pieces
Versatile slot nut made of aluminium with 45 mm length. Ideal for making auxiliary and clamping devices combined with guide rails. One threaded hole M8 with brass pressure screw for fixing the slot nut in guide rails for example and one...
€6.50
incl. VAT plus shipping costs
Article No. 714668
Guide Rail
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions 30 x...
€12.90
incl. VAT plus shipping costs
Article No. 714672
Slot Nut 200 mm, M6/M8
Slot nut with 200 mm length for constructing auxiliary and clamping devices combined with guide rails. The long slot nut is also suitable as a glide, e.g. for cross or angle fences on machine tables. The four M6 and three M8 internal...
€8.90
incl. VAT plus shipping costs
Article No. 714670
Sliding Rail, 300 mm
Adjustable sliding rail with square cross-section (19 x 9.5 mm) for guiding in T-tracks (e.g. Nos. 714672 , 714673 ). The 300 mm long rail contains four M6 threads for fastening stops, auxiliary devices, etc. The play between the sliding...
€12.90
incl. VAT plus shipping costs
Article No. 714671
Hattori Hold-down Clamp, Height Adjustable
Hold down clamp milled from solid aluminium with adjustable counterpressure part (three locking positions). This ensures the ideal position and maximum clamping force at any clamping height between 0 and 80 mm. A large star handle allows...
€29.90
incl. VAT plus shipping costs
Article No. 714650
Veritas T-Slot Fence Flip-Stop
T-slot length stop that can be fitted onto the T-track (No. 703899 ) for example, to facilitate the trimming of same-length workpieces for example. The stop can stay permanently on the T-track and be folded up when not in use.
€28.80
incl. VAT plus shipping costs
Article No. 703309
Hattori Step Block, 50 x 100 mm
The graduations milled at 10 mm intervals offer precise adjustment possibilities when clamping or setting workpieces for machining. End support for hold-down clamps: The clamping height of many T-slot hold-downs is limited by the...
€15.90
incl. VAT plus shipping costs
Article No. 714710
Hattori Universal Horizontal Clamp
The clamping elements fix round and square workpieces equally quickly and securely. The low installation height of 21 mm and the lateral clamping option offer a great advantage, especially with flat workpieces. The surface remains...
€49.00
incl. VAT plus shipping costs
Article No. 714707
Magnetic Base Light, Flexible Gooseneck, LED
An indispensable workshop accessory that is used especially for intricate work with bandsaws, drills, edge sanders and lathes. A powerful switchable magnetic base and a long flexible neck allow you to position the light source...
€79.00
incl. VAT plus shipping costs
Article No. 715641
Noppenschaum, passend für Kofferinnenmaß 147 x 150 mm
For the best possible protection of the contents. Soft polypropylene foam. Fits. No. 727824 .
€1.20
incl. VAT plus shipping costs
Article No. 727832
Noppenschaum, passend für Kofferinnenmaß 147 x 225 mm
For the best possible protection of the contents. Soft polypropylene foam. Fits. No. 727822 .
€1.50
incl. VAT plus shipping costs
Article No. 727829
Noppenschaum, passend für Kofferinnenmaß 278 x 193 mm
For the best possible protection of the contents. Soft polypropylene foam. Fits. No. 727820 .
€2.10
incl. VAT plus shipping costs
Article No. 727826
Foam Board 147 x 150 mm
For the best possible protection of the contents. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits. No. 727824 .
€1.20
incl. VAT plus shipping costs
Article No. 727825
Foam Board 147 x 225 mm
For the best possible protection of the contents. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits. No. 727822 .
€1.60
incl. VAT plus shipping costs
Article No. 727823
Foam Board 160 x 145 mm
For the best possible protection of the contents. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits No. 718431 .
€1.30
incl. VAT plus shipping costs
Article No. 718432
Foam Board 278 x 193 mm
For the best possible protection of the contents. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits. No. 727820 .
€2.20
incl. VAT plus shipping costs
Article No. 727821
Foam Board 85 x 145 mm
For the best possible protection of the contents in the case. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits No. 718418 .
€0.80
incl. VAT plus shipping costs
Article No. 718419
Transport and Storage Box
Injection-moulded boxes with high stability and optimum functionality for safe storage and transport. A full-length plug-in hinge ensures maximum stability. Sturdy adjustable feet provide a secure footing. Stacking lugs on the lid and...
€6.80
incl. VAT plus shipping costs
Article No. 718418
Transport and Storage Case, Internal Dimensions 278 x 193 x 50 mm
Injection-moulded cases with high stability and optimum functionality for safe storage and transport. A full length plug-in hinge ensures maximum stability. Extra sturdy, adjustable feet provide a secure footing. Stacking lugs on the lid...
€22.90
incl. VAT plus shipping costs
Article No. 727820
UJK 20 mm Dog Storage Rack
Avoid lengthy searches for MFT bench dogs or Parf Dogs. With the UJK Dog Rack, which is mounted e.g. to the workshop wall, up to eight useful aids are always at hand. It holds up to eight UJK Parf Dogs, Superdogs, Anchor Dogs, etc. or...
€25.70
incl. VAT plus shipping costs
Article No. 720659
Systainer³ M 337, Light Grey
Easy handling, ingenious functionality and compatibility with the proven Systainer generations Classic-Line and T-Loc characterise the new Systainer³. The one-handed operation of the Systainer saves time and brings real benefits to the...
€84.40
incl. VAT plus shipping costs
Article No. 718849
DICTUM Clamp Rack for All-steel Screw Clamps
This clamp rack made of powder-coated sheet steel for all-steel clamps is the ideal solution for storing up to twelve clamps safely and always within easy reach. Neatly organised on the wall, the clamps are stowed away to save space and...
€29.90
incl. VAT plus shipping costs
Article No. 711691
DICTUM Multifunction Table PRO, Closed Top
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,139.00
incl. VAT plus shipping costs
Article No. 728755
DICTUM Multifunction Table PRO, Hole Pattern 77
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,209.00
incl. VAT plus shipping costs
Article No. 728758
DICTUM Multifunction Table PRO, Hole Pattern X61
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,209.00
incl. VAT plus shipping costs
Article No. 728761