Kreg Easy-Set XL Drill Bit
Create extra-large pocket holes with twice the strength for material thicknesses of 38 mm or 90 mm. For use with the Kreg Pocket-Hole Jig XL. Stepped drill bit incl. stop collar and hex key.
€39.00
incl. VAT plus shipping costs
Article No. 704297
Kreg All-steel Pocket-Hole Jig Clamp
This screw clamp transforms the pocket-hole jigs of the 500 series (No. 704303 ) into a permanently mounted workbench device. It also provides additional stability for the Pocket-Hole Jig 720 (No. 704298 ) by fixing it to the work surface.
€26.10
incl. VAT plus shipping costs
Article No. 704301
Kreg Pocket-Hole Screws 32 mm, Galvanised, Maxi-Loc, Fine Thread
Screws with self-tapping fine thread and Maxi-Loc head, ideal for pocket hole joints. Maxi-Loc head with square drive. Fits bit No. 704299 .
€9.50
incl. VAT plus shipping costs
Article No. 704312
Kreg Pocket-Hole Screws, Galvanised, Maxi-Loc, Coarse Thread
Screws with self-tapping coarse thread and Maxi-Loc head, ideal for pocket hole joints. Maxi-Loc head with square drive. Fits bit No. 704299 .
€7.10
incl. VAT plus shipping costs
Article No. 704310
Kreg Pocket-Hole Jig K4
The K4 drilling jig, made of glass fibre reinforced nylon, is the perfect choice for getting started with pocket hole joinery systems. The generous clamping surface, along with the lever clamp, allows for a secure and stable grip on the...
€114.00
incl. VAT plus shipping costs
Article No. 704321
Kreg Square-Drive Bit Set, 76 mm & 152 mm
The advantage of the bits with square drive lies in the deep tips, which greatly reduce chipping when screwing. The bits have a magnetic tip. Standard 6.3 mm hex shank.
€5.90
incl. VAT plus shipping costs
Article No. 704299
Kreg XL Pocket-Hole Screws, 4 x 101 mm
Passende Schrauben für Kreg Taschenlochbohrschablone - Pocket-Hole Jig XL Nr. 704296 . Schrauben mit selbstschneidendem Grobgewinde und Maxi-Loc Kopf, passend für Taschenlochverbindungen. Der Maxi-Loc Kopf beinhaltet einen...
€13.90
incl. VAT plus shipping costs
Article No. 704314
Star-M Adjustable Countersink Drills, Conical, 7-Piece Set
The pre-drilling of wood screws takes on a different quality with this countersink drill. Greater tensile strength is achieved with the tapered design than with cylinder drills; at the same time the risk of screw breakage is reduced. The...
€98.00
incl. VAT plus shipping costs
Article No. 717327
90° Countersink with Bit Holder, 7-Piece Set
These HSS countersinks with three blades are suited for steel as well as light metal, for plastic as well as wood. The hexagonal shaft allows safe clamping without slippage and also insertion into quick-change bit holders. Comes in metal...
€61.70
incl. VAT plus shipping costs
Article No. 707469
Fisch Pilot Drill
With this pilot drill, you do not have to change bits from drill to countersink when drilling screw holes. You can set the depth of the hole without countersink to between 10 and 45 mm with a grub screw. The hexagonal shank prevents the...
€13.70
incl. VAT plus shipping costs
Article No. 707408
Fisch 90° Countersink, Ø 12.4 mm
For sinking countersunk head screws, for countersinking and deburring boreholes in wood, non-ferrous metals, alloyed, and unalloyed steels. These 3-flute HSS countersinks are chatter-free and stand out for low heat build up, excellent...
€18.60
incl. VAT plus shipping costs
Article No. 707374
Lie-Nielsen Countersink 82°
For countersinking screws as well as countersinking and deburring holes in wood. Excellent chip removal and high surface quality. American cherry handle, brass ferrule.
€94.90
incl. VAT plus shipping costs
Article No. 920446