Veritas Beam Compass Heads
For making beam compasses of any size. Two aluminium heads with pencil holders and steel points, one of which is eccentric to facilitate fine adjustment. Brass hardware. Thin square timbers are suitable as shafts.
€66.70
incl. VAT plus shipping costs
Article No. 707231
Veritas Trammel Points
For making beam compasses. The points score clear lines on any wood, and are also effective on aluminium, brass, bronze and unhardened steel. With the points removed, the trammel bodies double as square gauges, clamping onto a square to...
€31.30
incl. VAT plus shipping costs
Article No. 701859
Parallel Marker
Ideal for marking built-in elements, joints, door casings, etc. Guide it along the reference surface and the adjustable pencil draws the marking line. Can also be used as a compass, thanks to the steel pin in the lower shaft. Plastic....
€9.60
incl. VAT plus shipping costs
Article No. 716152
Pantograph
The pantograph (Greek for «all-round writer«) transfers drawings, contours and profiles in the same, larger or smaller scale from the plan to the workpiece and thus saves a detour via computer or photocopier. With the help of the milled...
€37.80
incl. VAT plus shipping costs
Article No. 708095
M. Power Tools Point.2.Point
For laying out equal spacings, e.g. dovetails, dowels, etc. Extends to 600 mm and can be locked in any position to transfer up to seven position markings (six equal spacings) to the workpiece. Stainless steel, brass screws. Not suitable...
€31.20
incl. VAT plus shipping costs
Article No. 707267
M. Power Tools Triscribe Marking Heads
Convert a try square into a precision marking gauge, or a flat ruler (up to 2.5 mm thick) into a practical measuring compass. Two marking heads, hardened needle insert, cutter insert with replacement blade, can also be used with pencil...
€23.90
incl. VAT plus shipping costs
Article No. 707268
Shinwa Scriber
Japanese log scriber for marking saddle notches in log house construction. Excellent value for money. Removable spirit level, rounded tip with copy function, fine tuning via spring tension. You can insert the pencil in the openings of...
€129.00
incl. VAT plus shipping costs
Article No. 707228
»mylogscriber« Log Scriber
For precise transfer of contours, especially for round timber corner joints (on log buildings). The »mylogscriber« impresses with its curved, glass bead blasted stainless steel tubes in combination with a wide variety of high quality...
€222.00
incl. VAT plus shipping costs
Article No. 730823
UJK 3-in-1 Trammel Set
This 3-in-1 trammel set can be used in three different ways: 1. Use both pins to mark out or scribe an arc. 2. Remove one pin and fitting the included HB pencil. 3. Replace one pin with a paper and card cutter blade which is also...
€49.00
incl. VAT plus shipping costs
Article No. 745274
UJK Trammel Set Extension Bar
Extension bar for UJK 3-in-1 trammel set (No. 745274 ). 64 cm long, gives a useful total length of 128 cm. Made of torsion-resistant aluminium profile with an easy-to-read metric scale.
€37.50
incl. VAT plus shipping costs
Article No. 745275
€16.40
incl. VAT plus shipping costs
Article No. 717187
€17.60
Article No. 717199