French Spring Dividers
Elegant French spring dividers made of gunmetal finished steel, with hardened points, quick-acting screws.
€23.50
incl. VAT plus shipping costs
Article No. 707150
French Spring Dividers with Pencil Holder
Elegant French spring dividers made of gunmetal finished steel, with hardened tips, quick-acting screws.
€32.50
incl. VAT plus shipping costs
Article No. 707151
Wing Dividers »L'Arc«
Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild along with the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
€44.90
incl. VAT plus shipping costs
Article No. 707376
Wing Dividers »L'Arc«, 310 mm
Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild alongside the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
€72.50
incl. VAT plus shipping costs
Article No. 707726
Moisture Meter with Electrode and Non-destructive Mode
Nothing is more irritating than the drying cracks or heavy warping that can occur after working on wood that is too wet. This moisture meter provides assistance with two different measuring modes: search mode provides non-destructive...
€209.00
incl. VAT plus shipping costs
Article No. 707285
Gann Electrode Moisture Meter, Measuring Range 5-20 %
The wood and plaster moisture meter functions using two measuring electrodes which are pushed into the material. The device measures the electrical resistance (and therefore the level of moisture) of the wood, wood-based material,...
€124.80
incl. VAT plus shipping costs
Article No. 707314
€10.50
incl. VAT plus shipping costs
Article No. 702334
€10.50
incl. VAT plus shipping costs
Article No. 702344
€10.50
incl. VAT plus shipping costs
Article No. 702384
Clamping Nut for Ring Kit
Ring assembly kits can be easily and securely clamped thanks to this clamping nut. A matching clamping size is available for every size of ring. The ring assembly kit is placed on the clamping nut and this is mounted on the lathe with...
€8.70
incl. VAT plus shipping costs
Article No. 702390
Clamping Mandrel for Ring Kit
Clamping mandrel for mounting ring assembly kits on the lathe with the aid of a clamping chuck or drill chuck. To be used in combination with the matching clamping nut (No. 702390 -96) according to the ring size.
€9.00
incl. VAT plus shipping costs
Article No. 702397
Screw eyelet with cap, 10 pcs.
Screw eyelet for gluing into drilled stones or other materials to make pendants. The cap provides additional stability. 925 silver, pack of 10. Approx. dimensions: inner diameter eyelet: 3.5 / 6 mm (width / length); screw length: 6 mm;...
€17.90
incl. VAT plus shipping costs
Article No. 717695