Vase Insert Stainless Steel
High-quality stainless steel insert for turned vases; easy to care for and rustproof.
€23.80
incl. VAT plus shipping costs
Article No. 720538
WECK Tea Light Holder
These inserts enable you to use tea lights without aluminium foil cup stylishly and safely in turned wooden holders without risking burn marks or wax stains.
€0.60
incl. VAT plus shipping costs
Article No. 727500
WECK Universal Candle Holder
Universal insert for tea lights and candles. For burning tea lights and candles stylishly and safely in wooden holders - without risking burn marks or wax stains.
€0.70
incl. VAT plus shipping costs
Article No. 727501
€1.80
incl. VAT plus shipping costs
Article No. 721306
€4.90
incl. VAT plus shipping costs
Article No. 721299
Pen Making Starter Kit
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€77.00
incl. VAT plus shipping costs
Article No. 731505
Pen Making Starter Kit II
This starter kit contains the basic tools needed to create pens, including materials for five twist ballpoint pens.
€109.00
incl. VAT plus shipping costs
Article No. 721246
Pen Turning Set, #2 MT
Starter set for making ballpoint pens, neatly and practically stored in a plastic case. Includes the most important tools and utensils for turning writing utensils.
€107.50
incl. VAT plus shipping costs
Article No. 731573
Sleeve Insertion Tool
Practical insertion tool with soft grip for writing utensil sleeves from 7-11 mm. The sleeves are simply slipped onto the conical shaft and glued into the drilled pen blank; excess glue no longer gets onto the fingers and can be easily...
€15.20
incl. VAT plus shipping costs
Article No. 731020
Pen Blank Vice
Thanks to the scored clamping jaws, every pen blank, whether squared, polygonal or round-shaped is fixed firmly and centrally. The clamping jaws open and close symmetrically, which has the advantage that the vice only needs to be aligned...
€86.90
incl. VAT plus shipping costs
Article No. 707750
Pen Press for Creating Pens, Standard
A pen press is used to combine the brass sleeves with the remaining components of a pen set. The elements are loosely inserted into each other, placed in the device, and pressed together with a single lever stroke. No need for...
€78.50
€64.00
incl. VAT plus shipping costs
Article No. 707751
Pen Press for Creating Pens, Deluxe
This high-quality pen press allows for an even more precise and rapid pressing of pen elements. An additional quick adjustment mechanism makes it possible to save time with elements of different sizes. Fine adjustment takes place...
€79.90
incl. VAT plus shipping costs
Article No. 707752
Teknatool SuperNOVA2 Jaws for Pen Blanks
These unique jaws have been especially designed to make it possible to drill pen blanks/square blanks on a woodturning lathe. The advantage of having two jaws is that the blank will always be clamped in the centre, regardless of...
€37.60
incl. VAT plus shipping costs
Article No. 720693
Pen Turning Mandrel for Pens, #2 MT
Pen turning mandrel with sliding clamping shaft for manufacturing pens and smaller turning projects. Precision-made with good true running accuracy Sunken grub screw for reduced risk of injury Collet fits rod diameter 6.2 mm, working...
€41.70
incl. VAT plus shipping costs
Article No. 731510
Mandrel Support, #2 MT
The mandrel support is a recommended connecting element between the mandrel and tailstock quill. It ensures that the mandrel is guided in a pressure-free and exact manner. Improves true running accuracy and protects against damage....
€37.50
incl. VAT plus shipping costs
Article No. 731511
Face-Milling Cutter with Bradawl
Once the brass sleeve is glued into the pen, the faces are cut square with the face-milling cutter, while the awl cleans the inside of the brass sleeve.
€26.70
incl. VAT plus shipping costs
Article No. 731512
Bradawl for Sleeves
The bradawl cleans the inside of the brass sleeves once the pen blanks have been glued. Use with face-milling cutter No. 731512 or 731513 .
€8.90
incl. VAT plus shipping costs
Article No. 731514
Finial Mandrel Kit, #2 MT
The Finial Mandrel provides pressure-free support for the fine end of a turned piece while the rest of it is being turned. The set includes three interchangeable nylon inserts in sizes 3 mm, 4.5 mm and 6 mm, which fit into the inner ring...
€46.90
incl. VAT plus shipping costs
Article No. 731518
Axminster Woodturning Pen Trimmer and Reamer Set
The set includes a trimmer with hexagonal shaft as well as ten interchangeable pen reamers in various sizes (7 mm, 8 mm, 11/32", 3/8", 10 mm, 10.5 mm, 27/64", 15/32", 12.5 mm and 37/64"). Once the brass sleeve is glued inside the blank,...
€119.00
incl. VAT plus shipping costs
Article No. 745295
Woodpeckers Ultra-Shear Centre Finder
Most woodturning projects begin by identifying the centre point of your workpiece. One of the easiest ways to do this is to use a centre finder. Woodpeckers’ uniquely designed and constructed centre finder is ideal for this task. Within...
€44.90
incl. VAT plus shipping costs
Article No. 718459
Digital Calliper
Multi-purpose calliper with a large five-digit LCD display for inside, outside and depth measurement. Display can be switched between millimetre and inch. Resolution of 0.01 mm. Display can be zeroed at any position. Stainless steel...
€38.40
incl. VAT plus shipping costs
Article No. 707258
Wiha digiMax Digital Calliper
Swiss-precision digital calliper of high-tech fibre-glass material for all inside, outside and depth measurements. The anti-magnetic material mix does not attract any metal cuttings, which increases measuring accuracy and, thanks to the...
€85.90
incl. VAT plus shipping costs
Article No. 717877
Starrett Calliper
This Starrett precision calliper is characterised by its very high accuracy of ± 0.02 mm. The scale is anti-reflective and deep-etched with mm and inch. Stainless steel slider with 0.02 mm vernier and locking screw. Delivered in storage...
€45.90
incl. VAT plus shipping costs
Article No. 718858
Shinwa Profile Gauges with Stainless Steel Pins
With fine stainless steel pins for particularly accurate results. Pin diameter 0.8 or 1.0 mm. Millimetre scale.
€18.30
incl. VAT plus shipping costs
Article No. 730534
Profile Gauge with Plastic Blades
For measuring and transferring profiles. No offset necessary, as blades are flush with the frame. Blade thickness 1.3 mm.
€8.90
incl. VAT plus shipping costs
Article No. 707145
Replacement Tip for Gann Electrode Moisture Meter
One pair of replacement tips, suitable for Gann Electrode Moisture Meter No. 707314 .
€0.90
incl. VAT plus shipping costs
Article No. 727314
French Outside Calliper
French outside callipers for precise wall thickness measurement of flat turned objects. Adjustable spring reset mechanism prevents unintentional loss of the measurement when pulling the callipers out of the turned object - ideal for...
€22.50
incl. VAT plus shipping costs
Article No. 707152
Starrett Inside Callipers with Spring Reset Mechanism
High-quality callipers with a simple, proven design. The renowned manufacturer uses quality materials, precise assembly and a particularly fine finish. For measuring openings and insides of turned objects, even with undercuts. Smooth,...
€83.50
incl. VAT plus shipping costs
Article No. 718325
Veritas Thickness Gauge
The outside callipers for precise wall thickness measurement of deep and thin turned objects. Adjustable spring reset mechanism prevents unintentional loss of the measurement when pulling the callipers out of the turned object - ideal...
€61.60
incl. VAT plus shipping costs
Article No. 717533
Martel Outside Calliper, Size S
The universal Martel 4-Way Callipers allows you to easily measure the wall thickness at almost any point of a hollow. Ideal for deep and bulky objects. Gun-finished and therefore rust-protected steel Precisely formed tips for accurate...
€60.80
incl. VAT plus shipping costs
Article No. 729653
Martel Outside Calliper, Size M
The universal Martel 4-Way Callipers allows you to easily measure the wall thickness at almost any point of a hollow. Ideal for deep and bulky objects. Gun-finished and therefore rust-protected steel Precisely formed tips for accurate...
€119.80
incl. VAT plus shipping costs
Article No. 729654
€8.90
incl. VAT plus shipping costs
Article No. 707146
Bridge City CS-3 CenterScribe
Like every other tools of Bridge City, CS-3 CenterScribe is designed with perfect combination of intended functions and unique aesthetics. Constructed from anodized aircraft grade aluminum alloy parts and a unique stainless steel braided...
€329.00
incl. VAT plus shipping costs
Article No. 703969
Veritas Centre Marker
For easy finding and marking the centre of any round or square blank of up to 150 mm in diameter or across. You fix the marker to the wall, and tap the blank with a hammer. The result is two scoring lines that intersect at the exact...
€32.00
incl. VAT plus shipping costs
Article No. 707312
Centre Finder for Round Stock
Simply place it on the end of a round piece of wood and mark two lines - the point of their intersection is the exact centre. Diameter of workpiece min. 20 mm / max. 220 mm.
€7.90
incl. VAT plus shipping costs
Article No. 707262
Centre Finder with Circle
Conventional centre markers find the geometric centre of a workpiece; the turned circumference is then aligned with this centre. However, especially with asymmetrical blanks (e.g. green wood blanks), a centre is sought that avoids...
€19.90
incl. VAT plus shipping costs
Article No. 702500
French Spring Dividers
Elegant French spring dividers made of gunmetal finished steel, with hardened points, quick-acting screws.
€23.50
incl. VAT plus shipping costs
Article No. 707150
French Spring Dividers with Pencil Holder
Elegant French spring dividers made of gunmetal finished steel, with hardened tips, quick-acting screws.
€32.50
incl. VAT plus shipping costs
Article No. 707151
Wing Dividers »L'Arc«
Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild along with the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
€44.90
incl. VAT plus shipping costs
Article No. 707376
Wing Dividers »L'Arc«, 310 mm
Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild alongside the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
€72.50
incl. VAT plus shipping costs
Article No. 707726
Quick-Release Chucks ECO with Morse Taper DIN 238
Good value for money. Quick-release chuck for craft and hobby use. For use on lathes, routers and vertical drilling machines. Self-tightening and high-force clamping. No chuck key, tighten and release effortlessly by hand. Jaw opening...
€43.50
incl. VAT plus shipping costs
Article No. 705658
Magnetic Base Light
An indispensable workshop accessory that is particularly helpful in delicate woodturnery. With the long flexible arm and the 180° swivel head, you can optimally illuminate thin-walled objects and green woodwork. The magnetic base can be...
€115.70
incl. VAT plus shipping costs
Article No. 705118
COBAelite Diamond Anti Fatigue Mat, 0.9 x 1.2 m
Premium anti-fatigue mat with first-class ergonomic properties. These properties not only increase standing comfort, but also prevent back pain and other musculoskeletal disorders. The one-piece mat with increased safety has an...
€159.00
incl. VAT plus shipping costs
Article No. 706657
Axminster Wall-mounted Tool Holder for #2 MT Accessories
With the lacquered wall-mounted tool holder for #2 MT accessories, which can be fixed to the wall using three screws (not included), up to six accessories with a #2 MT morse taper can be stored within easy reach.
€24.10
incl. VAT plus shipping costs
Article No. 730840
Taper Wiper
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€8.20
incl. VAT plus shipping costs
Article No. 704262
Hope Aluminium Grinding Disc Ø 145 mm, with Velcro Coating
Handy sanding disc that fits direct onto your lathe chuck. The dovetailed recess in the back is 55 mm. Fits most standard chucks with 100 mm diameter and jaws, including super nova, Record sc4, Vicmarc, etc. Not suitable for Axminster...
€32.80
incl. VAT plus shipping costs
Article No. 707959
Extraction Hose, Ø 100 mm
Flexible, steel wire reinforced hose with rubber cuffs at each end. Ideal for mobile extractors in the workshop. The rubber cuffs can suit extraction outlets of around 100 to 110 mm diameter quickly and easily.
€91.30
incl. VAT plus shipping costs
Article No. 720546
Dust Hood
Rectangular plastic funnel with spigot to fit 100 mm extraction hoses. For collecting and extracting shavings on e.g. table saws, surface planers and wherever there are no specific extraction connectors.
€19.90
incl. VAT plus shipping costs
Article No. 720549