Theme

2 of 6

Sanding Pads with Quick-Change Mechanism for Merlin2, grit 24

Sanding Pads with Quick-Change Mechanism for Merlin2, 10-Piece...

Fits Merlin2 quick-change support disc Ø 50 mm (No. 715371 ). 10-piece set.

€14.20 €10.90

incl. VAT plus shipping costs

Article No. 715387

See details

Replacement Cutter for Arbortech Ball Gouge

Fits Arbortech Ball Gouge No. 715325 .

€29.90

incl. VAT plus shipping costs

Article No. 715326

See details

Hex Key for Arbortech Ball Gouge

Fits Arbortech Ball Gouge No. 715325 .

€11.90 €8.90

incl. VAT plus shipping costs

Article No. 715327

See details

Replacement Standard Loop for Sorby Pyrography Tool, 10-Piece Set

Made of chrome-nickel steel. For all common detail work. Fits Sorby Peter Child Pyrography Tool No. 720449 .

€9.30

incl. VAT plus shipping costs

Article No. 720733

See details

Coil Loop for Sorby Pyrography Tool, 5-Piece Set

Made of chrome-nickel steel. For thick lines and large areas. 23SWG wire, corresponds to Ø 0.61 mm. Fits Sorby Peter Child Pyrography Tool No. 720449 .

€17.80

incl. VAT plus shipping costs

Article No. 720735

See details

Wire for Sorby Pyrography Tool

This wire made of chrome-nickel steel allows for the creation of custom burning tips. Fits Sorby Peter Child Pyrography Tool No. 720449 .

€12.90

(Content: €460.71 / 1 kg)

incl. VAT plus shipping costs

Article No. 720737

See details

Connector for Additional Pen for Sorby Pyrography Tool

This connector allows two burning tips to be connected to the Sorby Peter Child Pyrography Tool (No. 720449 ) simultaneously. The output is then distributed equally over the two burning tips.

€8.80

incl. VAT plus shipping costs

Article No. 720740

See details

Kutzall Dish Wheel, Tungsten Carbide Tipped, Ø 114 mm, Round, Original, Fine

Kutzall Dish Wheel, Tungsten Carbide Tipped, Round, Original

Kutzall Original: Consists of very sharp, conical TC tips. The fine, randomly arranged and densely distributed tips are ideal for producing fine surfaces and for working in the low speed range. Ideal for processing softwood.

€69.90

incl. VAT plus shipping costs

Article No. 727767

See details

Kutzall Long Taper Burr, Ø 5 x 23 mm, Original, Coarse

Kutzall Long Taper Burrs

Applications: Bores and perforations Lines and texturings Detail work and undercuts

€13.90

incl. VAT plus shipping costs

Article No. 727761

See details

Kutzall Long Taper Burrs

Applications: Lines and texturings Contour work and curves Concave shapes and undercuts

€16.80

incl. VAT plus shipping costs

Article No. 727758

See details

Kutzall Sphere Burr, Ø 9 mm, Original, Coarse

Kutzall Sphere Burrs

Applications: Concave shapes e.g. spoons, bowls Round undercuts

€15.70

incl. VAT plus shipping costs

Article No. 727749

See details

Kutzall Rotor Saw Burr, Ø 21 x 5 mm, Original, Coarse

Kutzall Rotor Saw Burrs

Applications: Hollowing work and reliefs Grooves and undercuts Texturings

€16.70

incl. VAT plus shipping costs

Article No. 727743

See details

Kutzall Dovetail Burrs

Applications: Fine lines and detail work V-grooves Sharp undercuts Sharp undercuts

€17.30

incl. VAT plus shipping costs

Article No. 727734

See details

Kutzall Flame Burr, Ø 9 x 14 mm, Original, Coarse

Kutzall Flame Burrs

Applications: Fine lines and texturings Edge work and V-grooves Detail work and undercuts Enlargement of perforations

€16.70

incl. VAT plus shipping costs

Article No. 727740

See details

Kutzall Cylinder Burrs

Applications: Flat surfaces or rounded edges (long side of the burr) 90° inside corners V-grooves (burr used at an angle)

€15.70

incl. VAT plus shipping costs

Article No. 727728

See details

Kutzall Ball Nose Burr, Ø 5 x 23 mm, Original, Coarse

Kutzall Ball Nose Burrs

Applications: Flat surfaces or rounded edges (long side of the burr) Concave surfaces or U-slots (round top) Enlargement of perforations

€15.70

incl. VAT plus shipping costs

Article No. 727719

See details

Kutzall Dish Wheel, Tungsten Carbide Tipped, Ø 114.3 mm, Flat, Extreme, Medium

Kutzall Dish Wheel, Tungsten Carbide Tipped, Flat, Extreme

Kutzall Extreme: Consists of precisely shaped cones with superior durability that are arranged in a regular pattern. The open arrangement of the TC teeth ensures »aggressive« free-cutting tips and cools the disc when working. It also...

€79.90

incl. VAT plus shipping costs

Article No. 727777

See details

Rubber Grinding Pad for Arbortech M5

Fits Arbortech Mini-Turbo No. 715284 , Mini Carver No. 715264 , 715609 and Contour Random Sander No. 715263 .

€13.80

incl. VAT plus shipping costs

Article No. 715285

See details

Arbortech M5 Rubber Grinding Pads Mounting Flange

Fits rubber grinding pads No. 715285 . Suitable for Arbortech Mini-Turbo No. 715284 , Mini Carver No. 715264 and Contour Random Sander No. 715263 .

€9.90

incl. VAT plus shipping costs

Article No. 715286

See details

Sanders for Arbortech M5

Fit Arbortech Mini-Turbo No. 715284 (except for grit 400 and 600), Mini Carver No. 715264 , 715609 and Contour Random Sanders No. 715263 . To be used with Rubber Grinding Pads No. 715285 and Mounting Flange No. 715286 .

€16.50

incl. VAT plus shipping costs

Article No. 715391

See details

Burnmaster Tips

Carefully crafted tips with copper contact probes for maximum conductivity. Length approx. 54 mm.

€11.60

incl. VAT plus shipping costs

Article No. 715309

See details

Burnmaster Tips

Carefully crafted tips with copper contact probes for maximum conductivity. Length approx. 54 mm.

€11.60

incl. VAT plus shipping costs

Article No. 715312

See details

Burnmaster Tips

Carefully crafted tips with copper contact probes for maximum conductivity. Length approx. 54 mm.

€11.60

incl. VAT plus shipping costs

Article No. 715313

See details

Burnmaster Tips

Carefully crafted tips with copper contact probes for maximum conductivity. Length approx. 54 mm.

€11.60

incl. VAT plus shipping costs

Article No. 715314

See details

Burnmaster Tips

Carefully crafted tips with copper contact probes for maximum conductivity. Length approx. 54 mm.

€11.60

incl. VAT plus shipping costs

Article No. 715315

See details

Clamp for Moviluty Handpieces

Fits Moviluty handpieces No. 727586 , 727587 .

€29.70

incl. VAT plus shipping costs

Article No. 727589

See details

Replacement Grinding Blade for Arbortech Mini Carver, Tungsten...

Ø 50 mm grinding blade with two tungsten carbide teeth, 10 mm cutting depth, 4 mm kerf width, can be sharpened with a diamond file.

€29.90

incl. VAT plus shipping costs

Article No. 715240

See details

Moviluty Handpiece, Ø Handle 25 mm

Ergonomically shaped, robust handpiece for heavy work. The 25 mm handle diameter ensures good handling, even over long periods. Max. collet Ø 6.35 mm. Incl. 9 mm open-ended spanner. Dimensions Ø 25 x 130 mm, 130 g. Comes without collet....

€104.00

incl. VAT plus shipping costs

Article No. 727587

See details

Moviluty Handpiece, Ø Handle 20 mm

Thin handpiece for fine detail work and close guidance. Max. collet Ø 6.35 mm. Incl. 9 mm open-ended spanner. Dimensions Ø 20 x 122 mm, 140 g. Comes without collet. Fits Moviluty flexible shafts.

€95.50

incl. VAT plus shipping costs

Article No. 727586

See details

Moviluty Handpiece with Three-jaw Chuck

The three-jaw chuck allows clamping tool shafts from 0.3 to 6.35 mm diameter. Incl. 12 mm open-ended spanner. Dimensions Ø 25 x 130 mm, 130 g. Fits Moviluty flexible shafts.

€109.00

incl. VAT plus shipping costs

Article No. 727588

See details

Moviluty Flexible Shaft for MOVIX Milling Motor, 160 cm

Shaft length 160 cm. Incl. spare safety staples. Fits MOVIX milling motors No. 727580 , 727581 .

€194.90

incl. VAT plus shipping costs

Article No. 727584

See details

Moviluty Flexible Shaft for MOVIX Milling Motor, 120 cm

Shaft length 120 cm. Incl. spare safety staples. Fits MOVIX milling motors No. 727580 , 727581 .

€179.00

incl. VAT plus shipping costs

Article No. 727582

See details

King Arthur's Tools Merlin2, Set A, Infinitely Variable Speed...

Merlin2 offers new possibilities for wood shaping. It allows for excellent control and light stock removal when shaping wood sculptures, finishing turned wooden bowls, carving small hollows or texturing surfaces. The slim gearbox neck of...

€289.00

incl. VAT plus shipping costs

Article No. 715348

See details

King Arthur's Tools Replacement Chain for Merlin Chain Saw...

Fits No. 715349 .

€16.50

incl. VAT plus shipping costs

Article No. 715350

See details

King Arthur's Tools Chain Saw Cutter, 8 Tooth

Ideal for small trimming cuts as well as for general shaping. Ideal for wood, bone, horn, antlers, fibreglass, plastic, solid rubber, foam core, ice and soft non-ferrous metals. In combination with Merlin2 not suited for rough material...

€23.20

incl. VAT plus shipping costs

Article No. 715349

See details

Kutzall Dish Wheel, Tungsten Carbide Tipped, Ø 50 mm

For perfect and efficient detail work with rotary tools. Various clamping options such as optional accessories on drills, straight grinders, Arbortech Mini-Carvers, etc. allow optimal and quick application. Recommended speed range...

€35.30

incl. VAT plus shipping costs

Article No. 727876

See details

MANPA Sanding Mandrels, 2-Piece Set

The mandrel tip accepts sanding discs or self-cut grinding stars. Size, shape and type of abrasive can thus be chosen according to your needs. The 50 mm Sanding Flex (No. 729899 ) can also be mounted on the mandrel. Fits angle grinders...

€44.90

incl. VAT plus shipping costs

Article No. 729905

See details

MANPA Sanding Mandrel with Slot

Cut a piece of abrasive according to your needs and insert it into the slot or wrap it around the conical shaft. The sanding mandrel makes it quick and easy to work on narrow, deep spots and openings. Fits angle grinders with M10 spindle...

€21.90

incl. VAT plus shipping costs

Article No. 729926

See details

MANPA Belt Cutter

This attachment arm turns standard angle grinders into real power carving all-rounders. Driven by a toothed belt, discs of various diameters and cutting edge shapes can be operated at a distance from the milling area. Unlike directly...

€269.90

incl. VAT plus shipping costs

Article No. 729928

See details

MANPA Milling Disc with Circular Cutter, 2 Inch, Ø 6 mm

MANPA Milling Discs, 2 Inch

Aluminium grinding disc with three TC cutting edges. Suitable for MANPA Belt Cutter with 2 inch cutter head. The small diameter makes these discs suitable for small objects and detailed work. The cutting edges of the TC inserts have a...

€84.90

incl. VAT plus shipping costs

Article No. 729930

See details

MANPA Crack Cutter

For detailed milling work in narrow and deep spaces. The milling depth can be additionally increased by means of extensions. A real »problem solver« not only for power carving. Fits any conventional angle grinder with M10/M14 spindle...

€99.90

incl. VAT plus shipping costs

Article No. 729918

See details

MANPA Sanding Wheel for Multi Cutter, 2 Inch

The robust TC tips are precisely shaped cones and arranged in a regular pattern across the disc. The open arrangement of the cones ensures »aggressive« free-cutting tips and cools the disc while working. It also prevents vibration and...

€64.90

incl. VAT plus shipping costs

Article No. 729963

See details

MANPA Mini Carving Bits

For detail work with rotary tools. The cutter with 6 mm shank can be used with drills, bending shafts or straight grinders. The small disc diameter of 16 mm allows a high freedom of movement when working small objects, tight spaces or...

€79.90

incl. VAT plus shipping costs

Article No. 729922

See details

Sanding Arbor, Diameter 5 mm

Self-cut abrasive fabric is inserted in the slot and wrapped around the arbor. This allows you to smooth extra-small radiuses. The external diameter can be enlarged by wrapping more layers around it. For abrasives up to a total thickness...

€3.20

incl. VAT plus shipping costs

Article No. 711141

See details

Cutter Bit of Tungsten-Vanadium Steel, Cylinder Head, Ø 3.2 mm

Cutter Bits of Tungsten-Vanadium Steel

Made of a single blank with precisely ground cutting edges, these cutters are suitable for a wide range of applications. Can be used in softwood and hardwood, non-ferrous metals, precious metals, plastics and plaster. The highly...

€12.80

incl. VAT plus shipping costs

Article No. 711154

See details

Burnmaster Contact Tips, Pair

Used with wire No. 715306 , these contact tips allow you to make your own tips. Fits Burnmaster Pen No. 715304 .

€8.20

incl. VAT plus shipping costs

Article No. 715305

See details

Burnmaster Tips

Carefully crafted tips with copper contact probes for maximum conductivity. Length approx. 54 mm.

€11.60

incl. VAT plus shipping costs

Article No. 715307

See details

Picard Blacksmith's Hammer, Head Weight 1000 g

Picard Blacksmith's Hammers

Drop-forged hammer with traditional Scandinavian shape: elliptical house, conically tapered hammer face with ferruled edges and rounded fin. Ash handle with annular wedge.

€42.30

incl. VAT plus shipping costs

Article No. 705334

See details

2 of 6