Special Offer: Arbortech TurboShaft plus 2 Replacement Cutters...
Router bit designed for free-hand shaping and routing. Fits to any 100/115 mm standard angle grinder. It is perfect for detailed free-hand sculpting and combines efficiency and exceptional control. It can be led free-hand easily and...
€109.00
incl. VAT plus shipping costs
Article No. 715262
Special Offer: Arbortech Industrial PRO Set plus 3 Replacement...
Blade with three replaceable tungsten carbide teeth and guard for Power Carving Unit (No. 728870 ) or 100 / 115 mm angle grinders. Adjustable guard can be used as a depth gauge or guide for straight cutting. Comes with German-language...
€119.00
incl. VAT plus shipping costs
Article No. 715232
Offer: Arbortech Industrial PRO Woodcarving Blade plus 3...
Ø 100 mm blade with three replaceable tungsten carbide teeth for 100 and 115 mm angle grinders. The blade should only be used with the Arbortech guard. Comes with German-language instruction manual compiled by DICTUM.
€109.00
incl. VAT plus shipping costs
Article No. 715233
King Arthur's Tools Merlin2, Set B
The Merlin2 offers new possibilities for wood shaping. It enables excellent control and light stock removal when shaping wood sculptures, finishing turned wooden bowls, carving small hollows or texturing surfaces. The slim gearbox neck...
€256.90
incl. VAT plus shipping costs
Article No. 715409
King Arthur's Tools Merlin2 Complete Surface Set, Nick Agar...
The perfect selection of abrasive, grinding, and polishing discs for woodturners, wood sculptors, metalworkers, model makers, and surface technicians. The comprehensive accessory set enlarges the areas in which long neck angle grinder...
€569.00
incl. VAT plus shipping costs
Article No. 715408
Foredom Carver with Shaft and Handpiece
Low-speed hang-up motor with high torque for woodcarving. The powerful, ultra-flexible, 90 cm long shaft allows a large range of movement and access to tight spaces. The manual switch allows you to set the infinitely adjustable speed (up...
€529.00
incl. VAT plus shipping costs
Article No. 711136
Replacement Tungsten Carbide Blades for Arbortech Industrial...
3 x K40 tungsten carbide teeth and 3 x M3 Torx screws.
€38.50
incl. VAT plus shipping costs
Article No. 715234
Arbortech Pro-Guard Polycarbonate Guard
For fitting on 100 and 115 mm angle grinders. Adjustable, can be used as a depth gauge or guide for straight cutting. Comes with German and English instructions.
€36.90
incl. VAT plus shipping costs
Article No. 715235
Replacement Cutters for Arbortech Mini-Turbo and TurboShaft
Fits Arbortech Mini-Turbo No. 715284 , Arbortech TurboShaft No. 715262 and Arbortech Mini Pro No. 728983 .
€26.90
incl. VAT plus shipping costs
Article No. 715261
King Arthur's Tools Carbide Abrasive Disc, Flat Face
This flat disc is only 3 mm thick and is used to mill fine grooves, make fine cuts, letterings and decorative grooves, e.g. on turning items. The small rasp disc allows for fast and effective removal of material, creating fine surfaces...
€53.20
incl. VAT plus shipping costs
Article No. 715354
King Arthur's Tools Carbide Abrasive Disc, Flat Profile
The small rasp disc allows for the fast and effective removal of material, creating fine surfaces when working along or across the grain as well as on end grain. For concave or convex shapes, profiles or deep hollows and vessels.
€47.80
incl. VAT plus shipping costs
Article No. 715353
King Arthur's Tools Merlin2 Surface Set, Nick Agar Signature...
The perfect selection of abrasive, grinding, and polishing discs for turners, wood sculptors, metalworkers, model makers, and surface technicians. The comprehensive accessory set enlarges the areas in which long neck angle grinder...
€369.00
€319.00
incl. VAT plus shipping costs
Article No. 715381
King Arthur's Tools Merlin2 Flat Carbide Abrasive Disc Sets
The flat abrasive disc is studded with sharp tungsten carbide teeth on the front, the edge, and on the back. They guarantee effortless material removal, even against the grain. The disc cuts in all directions and facilitates the milling...
€59.90
incl. VAT plus shipping costs
Article No. 715386
Merlin2 Quick-change Backing Pad Ø 50 mm
For screwing on polishing pads, bristle discs, or sanding discs with a quick-change attachment. The practical quick-change mechanism allows the tools to be switched rapidly. Made of robust rubber with an aluminium core. With hexagonal...
€34.80
incl. VAT plus shipping costs
Article No. 715371
Merlin2 Cleaning Discs 3 Pieces
Removes all coats of paint and light oxidation residue. For use with a wide range of metal surfaces. Fits quick-change backing pad No. 715371 .
€8.40
€6.90
incl. VAT plus shipping costs
Article No. 715373
Merlin2 Soft Pad
For use on the Merlin2 quick-change backing pad No. 715371 . Fits all Ø 50-56 mm Velcro grinding discs.
€24.70
incl. VAT plus shipping costs
Article No. 715378
Sanding Pads with Quick-Change Mechanism for Merlin2, 10-Piece...
Fits Merlin2 quick-change support disc Ø 50 mm (No. 715371 ). 10-piece set.
€14.20
€10.90
incl. VAT plus shipping costs
Article No. 715387
Replacement Grinding Blade for Arbortech Mini Carver, Tungsten...
Ø 50 mm grinding blade with two tungsten carbide teeth, 10 mm cutting depth, 4 mm kerf width, can be sharpened with a diamond file.
€29.90
incl. VAT plus shipping costs
Article No. 715240
King Arthur's Tools Merlin2, Set A, Infinitely Variable Speed...
Merlin2 offers new possibilities for wood shaping. It allows for excellent control and light stock removal when shaping wood sculptures, finishing turned wooden bowls, carving small hollows or texturing surfaces. The slim gearbox neck of...
€289.00
incl. VAT plus shipping costs
Article No. 715348
€16.50
incl. VAT plus shipping costs
Article No. 715350
King Arthur's Tools Chain Saw Cutter, 8 Tooth
Ideal for small trimming cuts as well as for general shaping. Ideal for wood, bone, horn, antlers, fibreglass, plastic, solid rubber, foam core, ice and soft non-ferrous metals. In combination with Merlin2 not suited for rough material...
€23.20
incl. VAT plus shipping costs
Article No. 715349
MANPA Belt Cutter
This attachment arm turns standard angle grinders into real power carving all-rounders. Driven by a toothed belt, discs of various diameters and cutting edge shapes can be operated at a distance from the milling area. Unlike directly...
€269.90
incl. VAT plus shipping costs
Article No. 729928
MANPA Milling Discs, 2 Inch
Aluminium grinding disc with three TC cutting edges. Suitable for MANPA Belt Cutter with 2 inch cutter head. The small diameter makes these discs suitable for small objects and detailed work. The cutting edges of the TC inserts have a...
€84.90
incl. VAT plus shipping costs
Article No. 729930
MANPA Crack Cutter
For detailed milling work in narrow and deep spaces. The milling depth can be additionally increased by means of extensions. A real »problem solver« not only for power carving. Fits any conventional angle grinder with M10/M14 spindle...
€99.90
incl. VAT plus shipping costs
Article No. 729918
MANPA Sanding Wheel for Multi Cutter, 2 Inch
The robust TC tips are precisely shaped cones and arranged in a regular pattern across the disc. The open arrangement of the cones ensures »aggressive« free-cutting tips and cools the disc while working. It also prevents vibration and...
€64.90
incl. VAT plus shipping costs
Article No. 729963
MANPA Mini Carving Bits
For detail work with rotary tools. The cutter with 6 mm shank can be used with drills, bending shafts or straight grinders. The small disc diameter of 16 mm allows a high freedom of movement when working small objects, tight spaces or...
€79.90
incl. VAT plus shipping costs
Article No. 729922