Special tools for musical instruments

2 of 12
Bow Maker‘s Plane, Blade Width 30 mm

Bow Maker‘s Plane, Blade Width 30 mm

An upright 90° positioned blade setup of a wooden plane for uneven hardwoods (pernambuco, ebony). Brass sole, HSS blade for cutting-edge durability.
 
€58.20

incl. VAT plus shipping costs

Article No. 702525

€13.70

incl. VAT plus shipping costs

Article No. 702515

Fingerboard Block Plane, Blade Width 30 mm

Fingerboard Block Plane, Blade Width 30 mm

Block plane with a very low blade angle and precisely machined narrow mouth opening. It allows extra-thin material removal, that is necessary for a perfect shaping of the cello and bass fingerboard. Brass body, ergonomically shaped brass...
 
€94.90

incl. VAT plus shipping costs

Article No. 702548

Herdim Scraper Blade, 0.30 mm

Herdim Scraper Blades

Very even metal structure for a fine burr that is achieved by a special hot rolling process with simultaneous hardening treatment. Hot-rolled - the entire material is elastic and has an even structure Made of spring steel with a small...
variants
€4.10

incl. VAT plus shipping costs

Article No. 703541

Herdim Scraper Blade, Stainless Steel, 0.25 mm

Herdim Scraper Blades, Stainless Steel

Thanks to the use of stainless steel, this scraper blade is permanently protected against patches of rust caused by hand perspiration. It is also three times more durable than spring steel scrapers. Hot-rolled - the entire material is...
variants
€4.10

incl. VAT plus shipping costs

Article No. 703544

Tapered Chisel, Blade Width 6 mm

Tapered Chisels

Chisels with tapered blade, ideal for undercutting in joinery and for cleaning corners and notches. Cutting edge of White Paper Steel. The handles are made of Japanese red oak and have forged steel hoops.
variants
 
€46.50

incl. VAT plus shipping costs

Article No. 710210

Herdim Opening Chisel

Herdim Opening Chisel

Using this tool makes opening of the instrument an easy task. Tapered blade can be easily bounced with hammer on the thicker (2 mm) end, very thin blade 0.4 mm easily opens the plate-rib joint. The corner and endblocks can be gently...
 
€41.70

incl. VAT plus shipping costs

Article No. 700376

Herdim Scroll Gouge, Sweep 5 / 13 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€49.10

incl. VAT plus shipping costs

Article No. 715531

Herdim Scroll Gouge, Sweep 6 / 16 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€50.90

incl. VAT plus shipping costs

Article No. 715533

Herdim Scroll Gouge, Sweep 7 / 5 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€49.30

incl. VAT plus shipping costs

Article No. 715536

Herdim Scroll Gouge, Sweep 8 / 5 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€48.70

incl. VAT plus shipping costs

Article No. 715539

Herdim Cornerblock Gouge, Sweep 6 / 16 mm

Herdim Cornerblock Gouges

Cornerblock gouges for carving of the corner blocks in the ribs. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€50.50

incl. VAT plus shipping costs

Article No. 715551

Herdim Scroll Gouges, 12-Piece Set

Herdim Scroll Gouges, 12-Piece Set

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
 
€556.00

incl. VAT plus shipping costs

Article No. 715550

Pfeil Flat Bow Making Chisel, Blade Width 2 mm

Pfeil Flat Bow Making Chisels,

Taper-ground blades made of high-quality tool steel (63 HRC), for bow making. Boxwood handles.
variants
 
€38.60

incl. VAT plus shipping costs

Article No. 701501

Pfeil Spoon Gouge, Sweep 5 / 30 mm

Pfeil Spoon Gouges

The shaft and blade are forged from a single piece, finely ground and polished.
variants
 
€83.50

incl. VAT plus shipping costs

Article No. 701103

Pfeil Spoon Gouge, Sweep 8 / 17 mm

Pfeil Spoon Gouges

The shaft and blade are forged from a single piece, finely ground and polished.
variants
 
€89.70

incl. VAT plus shipping costs

Article No. 701102

French Scraper Blade, Rectangular, Thickness 0.25 mm

French Scraper Blades, Rectangular

Cold-rolled Made of spring steel
variants
€3.50

incl. VAT plus shipping costs

Article No. 703507

French Scraper Blade, Gooseneck, Thickness 0.40 mm

French Scraper Blades, Gooseneck

Cold-rolled Made of spring steel
variants
€5.60

incl. VAT plus shipping costs

Article No. 703516

Scrapers, 4-Piece Set, Thickness 0.4 mm

Scrapers, 4-Piece Set

Cold-rolled Made of spring steel 1 piece each: rectangular 150 x 50 mm, convex/concave 140 x 50 mm, ball-shaped 140 x 70 mm, gooseneck 130 x 70 mm.
variants
€18.30

incl. VAT plus shipping costs

Article No. 703517

Mini Scrapers, 7-Piece Set

Mini Scrapers, 7-Piece Set

Cold-rolled Made of spring steel with a small amount of chrome and therefore light corrosion protection
€34.50

incl. VAT plus shipping costs

Article No. 703500

€57.90

incl. VAT plus shipping costs

Article No. 700608

Micro Chisel, 1.1 mm

Micro Chisel

For deburring grooves on bridges and saddles as well as for cleaning and removing e.g. residual dried glue. The long neck also allows working in deeper areas. HSS
variants
€44.40

incl. VAT plus shipping costs

Article No. 700625

Purfling Channel Cleaner

Purfling Channel Cleaner

Hardened tool steel blade with hardwood handle.
€11.90

incl. VAT plus shipping costs

Article No. 700606

2 of 12