Togeru Sharpening Device
For keeping the correct angle when sharpening knives manually. Simply put it on the back of the blade - when sharpening, place the incorporated ceramic fence on the honing stone surface. In this way, the bevel angle is quickly determined...
€11.40
incl. VAT plus shipping costs
Article No. 705377
Camber Roller Assembly for Veritas Sharpening System II
This accessory guide with barrel-shaped roller allows for honing slight curves into plane blade edges whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly of the Veritas sharpening...
€29.90
incl. VAT plus shipping costs
Article No. 703839
Veritas Sharpening System II with Narrow Blade Honing Guide
The self-centring double jaw honing device allows for the quick and easy sharpening of even the narrowest of chisels, mortise chisels or plane blades. The high-precision guide permits precise and consistent perpendicular sharpening,...
€105.80
incl. VAT plus shipping costs
Article No. 703844
Veritas Deluxe Honing Guide System II, 5-Piece Set
This multifunctional deluxe set allows for the precise and easy sharpening of nearly all tool blades, whether they have straight or slightly rounded cutting edges, whether the blade width is 2 mm or 72 mm. The set includes: Standard...
€141.00
incl. VAT plus shipping costs
Article No. 703845
Veritas Narrow Blade Clamp for Veritas Sharpening System II
Convert your standard Veritas Sharpening System II (No. 703666 ) into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the...
€59.60
incl. VAT plus shipping costs
Article No. 703843
Magna-Tec Delta-S Rubbing Alcohol
Isopropyl alcohol 99.9 %, 50 ml glass bottle. Suitable for the Magna-Tec Delta-S sharpening system (No. 708560 ).
€4.40
(Content: €88.00 / 1 litre)
incl. VAT plus shipping costs
Article No. 708581
30° Skewed Jaws for Lie-Nielsen Honing Guide
The 30° skewed jaws fit Lie-Nielsen side rabbet planes.
€55.80
incl. VAT plus shipping costs
Article No. 701218
€55.80
Article No. 701216
Lie-Nielsen Honing Guide Screwdriver
This screwdriver is made to fit the captive screws in the removable jaws for the Lie-Nielsen Honing Guide. Stainless steel blade, American cherry handle with brass ferrule. Overall length 137 mm
€64.90
incl. VAT plus shipping costs
Article No. 701212
Mortise Chisel Jaws for Lie-Nielsen Honing Guide
The mortise chisel jaws fit all Lie-Nielsen mortise chisels, as well as the 25 mm (1 inch) bevel edge chisel.
€55.80
Article No. 701215
Chisel Jaws for Lie-Nielsen Honing Guide
The chisel jaws fit 3 mm (1/8 inch) and 4.5 mm (3/16 inch) Lie-Nielsen bevel edge chisels as well as 6-19 mm (1/4 to ¾ inch) standard bevel edge chisels.
€55.80
Article No. 701214
Long Jaws for Lie-Nielsen Honing Guide
The long jaws fit all spokeshave blades and match the following Lie-Nielsen planes: Low-angle jack rabbet plane, bench rabbet plane, cabinet maker's scraper No. 85, shoulder plane. These jaws are reversible. The short end hones a bevel...
€55.80
Article No. 701213