OFFER: ToughBuilt Reload Utility Knife with 3 Blade Magazines
Utility knife with patented mechanism for quick reloading of new blades. Inside there is a reloading magazine with five double-sided blades, as well as a storage compartment for another ten blades. If the blade is blunt, it can be pulled...
€29.90
incl. VAT plus shipping costs
Article No. 714736
OFFER: ToughBuilt Scraper Utility Knife, 10 Blades
The knife features a patented mechanism that allows you to quickly transform it from a utility knife to a scraper with a simple press of your thumb. The double-sided universal knife blade flips from a vertical to a horizontal position...
€29.90
incl. VAT plus shipping costs
Article No. 714739
Bessey Folding Knife Set
An ergonomic folding knife for almost any purpose with high-quality folding mechanism and locking spring with zero backlash. The special blades, such as hook blades for packaging and carpets, utility blades for precise cut-outs and...
€29.90
incl. VAT plus shipping costs
Article No. 710539
Bessey Folding Knife, Plastic Handle
The high-grade spring-loaded folding mechanism that is free of play, the quick blade-release, the ergonomically shaped handle with belt clip and the distinctive appearance are the hallmarks of this knife. It can be used for cutting wood,...
€19.90
incl. VAT plus shipping costs
Article No. 710540
Bessey Folding Knife, Wooden Handle
The high-grade spring-loaded folding mechanism that is free of play, the quick blade-release, the ergonomically shaped handle with belt clip and the distinctive appearance are the hallmarks of this knife. It can be used for cutting wood,...
€18.90
incl. VAT plus shipping costs
Article No. 710541
Japanese Craft Knives
A sturdy craft knife does not necessarily need to be expensive. This Japanese craft knife can prove it. The 3 mm thick blade of easy-to-sharpen carbon steel (SK5) is mounted in a sturdy steel housing with a strong retention spring. The...
€14.60
incl. VAT plus shipping costs
Article No. 709046
»Kiridashi« Veneer Knife, HSS
This very sharp and rarely found »Kiridashi« made of HS steel is extremely edge-holding , breakproof and resistant to heavy wear due to its high durability and hardness (approx. 64 HRC). The cutting angle of 22° makes it possible to...
€75.80
incl. VAT plus shipping costs
Article No. 719889
Veneer and Marking Knife »Yokote Kogatana«, Blade without Handle
Double-layered steel blade with hammered surface. Right bevel. Also suitable as a bonsai knife especially for reworking cuts near the trunk.
€32.20
incl. VAT plus shipping costs
Article No. 710709
Veneer and Marking Knife »Yokote Kogatana«, with Handle and...
Double-layered steel blade with hammered surface. Right bevel. Magnolia handle.
€58.50
incl. VAT plus shipping costs
Article No. 710708
»Kiridashi« Veneer Knife, Brass Handle
Very flat, very sharp in original Japanese design . Handle and blade guard made of finest sheet brass. Single bevel, sharpened ready for use. SK5 carbon steel .
€10.80
incl. VAT plus shipping costs
Article No. 719979
Hultafors Utility Knife
Robust and well-balanced utility knife, ergonomically designed for the best possible level of safety, comfort and control. Durable zinc housing which contains a spring-loaded blade magazine that holds ten spare blades of SK5 steel, 60-62...
€14.70
incl. VAT plus shipping costs
Article No. 701630
Workshop Knife »Kiridashi«, Plastic Handle
Double-layered steel blade, cutting edge layer of carbon steel. The rubberised hard plastic handle provides a secure grip at any time. The practical protective cap keeps the blade safe, making the knife ideal for use outdoors and on...
€11.50
incl. VAT plus shipping costs
Article No. 700446
Cutter Knife, Cast Aluminium
Cutter knife made of robust cast aluminium. Excellent value for money. Ribs on top and bottom ensure a safe grip. Removable end cap for fast changing of blades. Blade width 18 mm.
€3.70
incl. VAT plus shipping costs
Article No. 715178
Black Evolution Blades for Cutter Knives, 10-Piece Set
Japanese blades for cutter knives with outstanding durability and sharpness. Conventional blades for cutter knives normally have a hardness of 52-55 HRC, but the Black Evolution blades reach a hardness of 65 HRC. Each blade also has a...
€4.60
incl. VAT plus shipping costs
Article No. 715180
Japanese Professional Glass Cutter
Finely ground, sintered tungsten carbide cutter with unsurpassed service life means effortless glass cutting. Permanent lubrication thanks to the petroleum reservoir in the handle. Maximum glass thickness 8 mm. Lubricant not included.
€33.90
incl. VAT plus shipping costs
Article No. 716155
Löwe Anvil Mitre Shears
Designed as an anvil shear with a 45° stop on both sides, the properties of these mitre shears make them ideal for clean mitre cuts of mouldings, profiles and seals. The replaceable blade easily cuts materials such as plastic, wood,...
€70.50
incl. VAT plus shipping costs
Article No. 718643
€4.40
incl. VAT plus shipping costs
Article No. 710542
Replacement Blades for ToughBuilt Scraper and Reload Utility...
Precision-ground carbon steel blades for accurate cuts. Fits ToughBuilt Scraper Utility Knife No. 714739 and ToughBuilt Reload Utility Knife No. 714736 . 30 pieces
€11.90
incl. VAT plus shipping costs
Article No. 714740
Spare Blades for Hultafors Utility Knife
Spare spring-loaded blade magazine containing 10 spare blades. Made of SK5 steel, 60-62 HRC. Fits No. 701630 .
€4.20
incl. VAT plus shipping costs
Article No. 701634
€1.20
incl. VAT plus shipping costs
Article No. 715179
Replacement Blades for Cutter, 9 mm, 10-Piece Set
10 blades for cutter, 9 mm. Fits No. 720719 , 703645 .
€0.90
incl. VAT plus shipping costs
Article No. 715184
€39.10
incl. VAT plus shipping costs
Article No. 717188
Cutter Blades for Snap-Off-Knife
10 spare cutter blades. Made of SK5 steel, 60-62 HRC. Fits No. 712150 and 701632 .
€5.50
incl. VAT plus shipping costs
Article No. 701633
Additional Blades for Cutter Knife, 9 mm, Extra Slim
10 extra slim cutter blades for carving out small tool details. Fits No. 720719 .
€3.80
incl. VAT plus shipping costs
Article No. 720720
Matthias Fenner Bradawl, Elm/Titanium
Handmade bradawl made of elm and titanium. The selection of top-notch materials combined with perfect craftsmanship makes this awl not only a high quality tool, but a reliable companion in the workshop for years to come, which can become...
€79.90
incl. VAT plus shipping costs
Article No. 718842
Matthias Fenner Marking Awl, Elm/Titanium
Handmade marking awl made of elm and titanium. The selection of top-notch materials combined with perfect craftsmanship makes this awl not only a high-quality tool, but a reliable helper for all scribing and marking tasks for years to...
€56.90
incl. VAT plus shipping costs
Article No. 719434
Traditional Bradawl, Solid Carbide
Bradawl made of solid carbide with sharp tip for precise marking and pre-punching of drill holes in soft and hard woods. The sharp edges, from the 10° pyramid tip to the ferrule, cleanly cut through every wood fibre, ideal for...
€99.90
incl. VAT plus shipping costs
Article No. 732021
€7.90
incl. VAT plus shipping costs
Article No. 717205
Starrett Automatic Centre Punch
Marking drill hole centres and screw positions has never been easier. With no need for a hammer, place the centre punch at the desired position and simply press it down. The internal mechanism strikes a blow, the force can be adjusted by...
€26.00
incl. VAT plus shipping costs
Article No. 718307
Nail Starter
Tool for making pilot holes to start long nails. Forged, hardened steel blade with a hilted tang. Red oak handle, ferruled on both sides.
€59.90
incl. VAT plus shipping costs
Article No. 717200
Centre Marker
For exactly marking and punching the screw positions on fittings such as key plates and hinges. The spring-loaded cone centres itself in the screw holes of the fittings when the steel tip is pressed into the wood. This way, the screw...
€14.10
incl. VAT plus shipping costs
Article No. 717218
Punch Awl with Full-length Blade
This punch awl or pricking awl is used for pricking and pre-piercing screw holes. Varnished beech handle, full-length blade of chrome-vanadium steel.
€8.20
incl. VAT plus shipping costs
Article No. 719379
€7.90
incl. VAT plus shipping costs
Article No. 717217
Tools for Marking and Checking, Wooden Case, 2-piece Set
This set masters demanding testing and marking tasks with the highest accuracy. The handy precision square is excellent for checking the squareness of accurately planed workpieces, for setting the tool height on the machine table and for...
€119.90
incl. VAT plus shipping costs
Article No. 730884
Tools for Measuring and Marking, 6-piece Set
This practical measuring and marking set is the perfect basic equipment for professionals and demanding woodworkers alike - an ideal gift e.g. as a recognition for passing the Journeyman's examination. All measuring and marking tools are...
€114.00
incl. VAT plus shipping costs
Article No. 715618
Pica FINE DRY Longlife Automatic Pen 0.9
Robust mechanical pencil with 0.9 mm lead diameter for high-precision marking in carpentry. An automatic push mechanism for reliable lead feed and long-lasting lead holding power. The sealing ring and umbrella cap for effective dust and...
€13.10
incl. VAT plus shipping costs
Article No. 727968
Pica Marking Pen, Red
Waterproof ink marker pen with self-adjustable stainless steel telescopic tip. The tip can be rotated several times by 180° to increase tool durability. The long telescopic tip is ideal for marking high-up tools. Protective sheath included.
€6.70
incl. VAT plus shipping costs
Article No. 727695
Expert Dry All-In One Marking Pen with Refills, Set
The perfect alternative to a conventional carpenter’s pencil. Allows you to write on almost any surface, dry or wet. With its clip-on sheath with integrated sharpening function, the All-In One Marking Pen is always ready to hand. Thanks...
€15.40
incl. VAT plus shipping costs
Article No. 716393
Expert Dry All-In-One Marking Pen
The perfect alternative to a conventional carpenter's pencil. Allows you to write on almost any surface, dry or wet. Thanks to its clip-on sheath with integrated sharpening function, the All-In-One Marking Pen is always ready to hand....
€9.40
incl. VAT plus shipping costs
Article No. 717288
Pica DRY Longlife Automatic Pen
The perfect alternative to a conventional carpenter’s pencil. Thanks to its telescopic refill, it is also ideal for marking deep-holes in tight spaces e.g. boreholes. Further advantages: Seal ring for effective protection against dust...
€13.40
incl. VAT plus shipping costs
Article No. 727897
Pica DRY Longlife Automatic Pen, Set
This set consists of a Pica Dry Longlife Automatic Pen and a refill pack (10 pieces).
€21.70
incl. VAT plus shipping costs
Article No. 727901
Pica POCKET incl. Carpenter's Pencil
Keep your carpenter's pencil handy with this sheath with pocket clip. Thanks to the integrated blade, you can sharpen pencils with an oval cross-section easily and safely. The clever locking mechanism holds even the shortest pencil at...
€9.80
incl. VAT plus shipping costs
Article No. 707375
DICTUM Marking Gauge, Compact
This stainless-steel marking gauge simultaneously impresses with its high marking accuracy and compact form. It is the tool of choice for inlay work and small-format workpieces. The shaft is hardened and the locking screw has a...
€19.60
incl. VAT plus shipping costs
Article No. 717203
Crown Mini Marking Gauge
Beautiful handy marking gauge, made in England. The wedge-locked V-cutter cuts the fibre, which helps it stay true. Warp-free bamboo composite material.
€22.20
incl. VAT plus shipping costs
Article No. 707175
Cutter, 9 mm
Versatile cutter with slim blade for a wide variety of materials (paper, carpets etc.). Ribs on the upper- and underside ensure a firm grip. At the end of the handle there is an additional helper for opening cardboard boxes. Blade width...
€4.40
incl. VAT plus shipping costs
Article No. 720719
Replacement Blades 30° for Cutter Knife 9 mm, 10-piece Set
Ten Japanese cutter blades with 30°, width 9 mm. For cutting paper, cardboard, fabrics, leather, vinyl, PVC and similar materials. Fits No. 720719 .
€3.90
incl. VAT plus shipping costs
Article No. 715208
Wing Divider, Polished Stainless Steel
Marking divider made of polished stainless steel, for parallel marking, transferring measurements, dividing distances or marking circles on leather. Maximum opening: 100 mm, shaft length: 70 mm.
€18.70
incl. VAT plus shipping costs
Article No. 745243
Scalpel Handle, Stainless Steel Without Blade
Strong, easy-care stainless steel scalpel handle with textured shank. The patented locking system allows blades to be replaced easily while ensuring that they sit firmly in the handle.
€18.90
incl. VAT plus shipping costs
Article No. 700415