Scribing and cutting tools

Zebra »DelGuard« Mechanical Pencil, 0.5 mm

Mechanical pencil with double spring mechanism. This ensures that the lead is held securely and offers protection against lead breakage whether held vertically or at an oblique angle when writing. The textured grip also makes writing...

€6.99

incl. VAT plus shipping costs

Article No. 730760

See details

Precision Scriber

Japanese precision scribers with very finely ground, extra-hard tips, for marking metal, glass, ceramics, and plastic. The extremely sharp points can also be used for customizing probes and other small objects.

€18.30

incl. VAT plus shipping costs

Article No. 717118

See details

Steel Needle

With very finely ground, extra hard tips for marking metal, glass, ceramic and plastic. The extremely sharp points can also be used for customizing probes and other small objects.

€24.70

incl. VAT plus shipping costs

Article No. 717117

See details

M. Power Tools Profile Scriber

This tool enables precise scribing of shelves, worktops and flooring through five different tracing wheels. The spring-loaded pencil, contained in the knurled shaft, allows gentle downward pressure and therefore a smooth, even line. Four...

€29.80

incl. VAT plus shipping costs

Article No. 707289

See details

Veritas Centre Marker

For easy finding and marking the centre of any round or square blank of up to 150 mm in diameter or across. You fix the marker to the wall, and tap the blank with a hammer. The result is two scoring lines that intersect at the exact...

€32.00

incl. VAT plus shipping costs

Article No. 707312

See details

Centre Finder for Round Stock

Simply place it on the end of a round piece of wood and mark two lines - the point of their intersection is the exact centre. Diameter of workpiece min. 20 mm / max. 220 mm.

€7.90

incl. VAT plus shipping costs

Article No. 707262

See details

Centre Finder with Circle

Conventional centre markers find the geometric centre of a workpiece; the turned circumference is then aligned with this centre. However, especially with asymmetrical blanks (e.g. green wood blanks), a centre is sought that avoids...

€19.90

incl. VAT plus shipping costs

Article No. 702500

See details

Starrett Automatikkörner

Marking drill hole centres and screw positions has never been easier. With no need for a hammer, place the centre punch at the desired position and simply press it down. The internal mechanism strikes a blow, the force of which can be...

€45.90

incl. VAT plus shipping costs

Article No. 718508

See details

Automatic Punch Set with 26 Letters and Numbers

With this set you can easily mark wood and non-hardened metal. The knurled brass handle works with spring-load, you do not need a hammer. Simply insert a letter or number bit into the hexagon socket and press down. Letters are approx. 4...

€18.40

incl. VAT plus shipping costs

Article No. 708324

See details

Bridge City SA Scratch Awls, 3-Piece Set

CNC-turned and anodised aluminium handles; for scribing metal, glass, ceramics, plastic, panel materials and wood. The good balance of this tool in your hand allows you to draw lines in the tightest of situations, such as dovetails,...

€115.90

incl. VAT plus shipping costs

Article No. 728970

See details

Replacement Cotton Pads for Shinwa Ink Line

Fits No. 717442 . 3 pieces

€4.90

incl. VAT plus shipping costs

Article No. 717306

See details

Replacement Cotton Pads for Shinwa Ink Line, Mini

Fits No. 717441 . 3 pieces.

€4.90

incl. VAT plus shipping costs

Article No. 717307

See details

Replacement Thread for Ink Lines

Fits No. 717442 . Length 20 m.

€4.40

incl. VAT plus shipping costs

Article No. 717291

See details

Replacement Thread for Shinwa Ink Line, Mini

Fits No. 717441 . Length 15 m.

€3.90

incl. VAT plus shipping costs

Article No. 717294

See details

Replacement Pin for Shinwa Ink Line / Ink Line, Mini

Fits No. 717441 , 717442 .

€4.90

incl. VAT plus shipping costs

Article No. 717308

See details

Replacement Pencil Tips, 2-Piece Set

Fits No. 717118 .

€12.50

incl. VAT plus shipping costs

Article No. 717119

See details

Refill Leads for Zebra »DelGuard« Mechanical Pencil 0.5 mm

€3.50

incl. VAT plus shipping costs

Article No. 730761

See details

Refills for Expert Dry All-In One Marking Pen, Coloured, 10-Piece Set

Refills for Expert Dry All-In One Marking Pen, 10-Piece Set

Fits No. 717288 .

€6.70

incl. VAT plus shipping costs

Article No. 717303

See details

Red Rose Reproductions Divider, Leg Length 127 mm

Red Rose Reproductions Dividers

Traditionally, a divider is the ideal marking tool for a variety of tasks, including transferring measurements, dividing distances, and creating geometric shapes. The purist design, easy handling and outstanding quality of this divider...

€188.00

incl. VAT plus shipping costs

Article No. 725030

See details

Red Rose Reproductions Attachment with Pencil Holder

Attachment with stainless steel pencil holder - for drawing arcs and circles. The conversion is simple and requires no tools. Instead of the screwed compass point, the attachment is fixed with a knurled screw. The attachment fits both...

€48.50

incl. VAT plus shipping costs

Article No. 725032

See details

Veritas Beam Compass

Practical stainless steel beam compass for marking large dimensions. The standard use with only one beam allows the sketching of circles with a diameter of 76-610 mm. With the two included additional beams, the diameter can be easily...

€85.60

incl. VAT plus shipping costs

Article No. 717539

See details

Veritas Log Scribe »Scriber«

For transferring contours to round stock, especially for marking corner joints (log home building). Two built-in levels, two steel pins (with a pointed tip for compass work and a rounded tip for smooth scribing) and a pencil holder....

€136.00

incl. VAT plus shipping costs

Article No. 707269

See details

French Spring Dividers

Elegant French spring dividers made of gunmetal finished steel, with hardened points, quick-acting screws.

€21.20

incl. VAT plus shipping costs

Article No. 707150

See details

French Spring Dividers with Pencil Holder

Elegant French spring dividers made of gunmetal finished steel, with hardened tips, quick-acting screws.

€29.60

incl. VAT plus shipping costs

Article No. 707151

See details

Wing Dividers »L'Arc«

Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild along with the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...

€42.90

incl. VAT plus shipping costs

Article No. 707376

See details

Wing Divider »L'Arc« with Carpenter’s Pencil Holder, 310 mm

Wing Dividers »L'Arc«, 310 mm

Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild alongside the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...

€68.30

incl. VAT plus shipping costs

Article No. 707727

See details

Veritas Beam Compass Heads

For making beam compasses of any size. Two aluminium heads with pencil holders and steel points, one of which is eccentric to facilitate fine adjustment. Brass hardware. Thin square timbers are suitable as shafts.

€66.70

incl. VAT plus shipping costs

Article No. 707231

See details

Veritas Trammel Points

For making beam compasses. The points score clear lines on any wood, and are also effective on aluminium, brass, bronze and unhardened steel. With the points removed, the trammel bodies double as square gauges, clamping onto a square to...

€31.30

incl. VAT plus shipping costs

Article No. 701859

See details

Parallel Marker

Ideal for marking built-in elements, joints, door casings, etc. Guide it along the reference surface and the adjustable pencil draws the marking line. Can also be used as a compass, thanks to the steel pin in the lower shaft. Plastic....

€9.60

incl. VAT plus shipping costs

Article No. 716152

See details

Pantograph

The pantograph (Greek for «all-round writer«) transfers drawings, contours and profiles in the same, larger or smaller scale from the plan to the workpiece and thus saves a detour via computer or photocopier. With the help of the milled...

€37.80

incl. VAT plus shipping costs

Article No. 708095

See details

M. Power Tools Point.2.Point

For laying out equal spacings, e.g. dovetails, dowels, etc. Extends to 600 mm and can be locked in any position to transfer up to seven position markings (six equal spacings) to the workpiece. Stainless steel, brass screws. Not suitable...

€31.20

incl. VAT plus shipping costs

Article No. 707267

See details

M. Power Tools Triscribe Marking Heads

Convert a try square into a precision marking gauge, or a flat ruler (up to 2.5 mm thick) into a practical measuring compass. Two marking heads, hardened needle insert, cutter insert with replacement blade, can also be used with pencil...

€23.90

incl. VAT plus shipping costs

Article No. 707268

See details

Shinwa Scriber

Japanese log scriber for marking saddle notches in log house construction. Excellent value for money. Removable spirit level, rounded tip with copy function, fine tuning via spring tension. You can insert the pencil in the openings of...

€129.00

incl. VAT plus shipping costs

Article No. 707228

See details

»mylogscriber« Log Scriber

For precise transfer of contours, especially for round timber corner joints (on log buildings). The »mylogscriber« impresses with its curved, glass bead blasted stainless steel tubes in combination with a wide variety of high quality...

€222.00

incl. VAT plus shipping costs

Article No. 730823

See details

UJK 3-in-1 Trammel Set

This 3-in-1 trammel set can be used in three different ways: 1. Use both pins to mark out or scribe an arc. 2. Remove one pin and fitting the included HB pencil. 3. Replace one pin with a paper and card cutter blade which is also...

€49.00

incl. VAT plus shipping costs

Article No. 745274

See details

UJK Trammel Set Extension Bar

Extension bar for UJK 3-in-1 trammel set (No. 745274 ). 64 cm long, gives a useful total length of 128 cm. Made of torsion-resistant aluminium profile with an easy-to-read metric scale.

€37.50

incl. VAT plus shipping costs

Article No. 745275

See details

Replacement Blade for Lie-Nielsen Radius Cutter

Fits No. 717180 .

€16.40

incl. VAT plus shipping costs

Article No. 717187

See details

Replacement Blade for Lie Nielsen Panel Gauge

Fits no. 717186 .

€17.60

Article No. 717199

See details

Multifunctional Marking T-Rule, 650 mm

This T-rule is a versatile tool for precise work. Its integrated functions enable precise scribing, accurate drilling and the marking of radii thanks to its compass function. A particular highlight is that the fence can be removed at the...

€169.00

incl. VAT plus shipping costs

Article No. 714769

See details

Hamilton Marking Knife, Cherry

Every Hamilton marking knife is handcrafted , polished, and waxed to ensure the highest quality and an appealing finish The selection of top-notch materials combined with perfect craftsmanship makes this marking knife not only a...

€149.00

incl. VAT plus shipping costs

Article No. 718699

See details

Matthias Fenner Marking Knife, Elm/Titanium

Handmade marking knife made of elm and titanium. The selection of top-notch materials combined with perfect craftsmanship makes this marking knife not only a high quality tool, but a reliable companion in the workshop for years to come,...

€69.90

incl. VAT plus shipping costs

Article No. 718843

See details

Hattori Marking Knife

This handy marking knife with prism-shaped blade is ideal for universal scribing to the left or right of a guide. The blade is hardened to 59 HRC and firmly fastened to the round precious wood handle with a stick tang. Suitable for both...

€12.00

incl. VAT plus shipping costs

Article No. 717102

See details

Marking Knife »Kogatana« Standard, Double Bevel, Blade Width 3 mm

Marking Knives »Kogatana« Standard, Double Bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.

€22.20

incl. VAT plus shipping costs

Article No. 710205

See details

Marking Knife »Kogatana« Standard, Right bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.

€22.20

incl. VAT plus shipping costs

Article No. 710404

See details

Marking Knife »Kogatana« Standard, Left bevel

These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.

€28.40

incl. VAT plus shipping costs

Article No. 710304

See details

Veneer Knife »Kiridashi«, Blade Width 9 mm

Veneer Knives »Kiridashi«

Hand-forged slim knife made of double-layered steel with embossed surface and rattan binding. Right bevel.

€47.70

incl. VAT plus shipping costs

Article No. 710530

See details

Purfling Cutter

For marking parallel lines and cutting a precise groove for inlay strips. Two parallel blades of double-layered steel. Adjustable blade distance measured on the outside 2.5-12 mm.

€69.00

incl. VAT plus shipping costs

Article No. 717110

See details

Carving and Veneer Knife, Double Bevel

Extra-strong blade of XC 75 carbon steel (approx. 62 HRC), pre-sharpened. The handle scales of polished Macassar ebony are fastened with sturdy brass rivets.

€38.00

incl. VAT plus shipping costs

Article No. 700411

See details

2 of 4