Festool Drilling cutter HW S8 D8/19
Main areas of application: For cutouts of any kind - without pre-drilling, the drilling cutter goes right through the coating material. Through the subsequent routing of contours, splinters on the edges of the coatings are effectively...
€33.90
incl. VAT plus shipping costs
Article No. 706679
Festool Edge trimming cutter HW S8 D12,7/NL25
Main areas of application: Edge trimming cutter with ball bearing below - this allows coatings in and on panel edges to be flush cut. Because of the small ball bearing, even inner radii of 15 mm can be flush cut
€63.20
incl. VAT plus shipping costs
Article No. 706680
Festool Through-hole drill HW S8 D5/30
Main areas of application: "Through-hole drilling bits for rows of holes; suitable for cutting through panels with its longer HW drill bit"
€35.70
incl. VAT plus shipping costs
Article No. 706681
Festool Flute cutter HW S8 D25,5/R6,35 KL
Main areas of application: For every flute cutter, Festool offers a roundover cutter with the same radius (except for R 20). Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles
€48.20
€44.90
incl. VAT plus shipping costs
Article No. 706684
Festool Groove cutter HW S8 D3/6
Main areas of application: More security against small diameter bits breaking because of the low vibration all tungsten carbide cutter design. The partially ground standard tungsten carbide blade provides an increased service life when...
€38.40
incl. VAT plus shipping costs
Article No. 706688
Festool Groove cutter HW S8 D10/25
Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade
€39.90
incl. VAT plus shipping costs
Article No. 706693
Festool Groove cutter HW S12 D13,2/35 PLANET
Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade. Together with the routing aids, automatic door seals can be routed on the front
€92.90
incl. VAT plus shipping costs
Article No. 706700
Festool Disk groove cutter HW D40x1,5
Main areas of application: Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm. The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm
€24.90
incl. VAT plus shipping costs
Article No. 706701
Festool Script cutter HS S8 D11/60°
Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€45.20
incl. VAT plus shipping costs
Article No. 706706
Festool Script cutter HW S8 D11/60°
Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€56.90
incl. VAT plus shipping costs
Article No. 706707
Festool T-slot cutter HW S8 D10,5/NL13
Main areas of application: For routing T-grooves, picture slots and keyhole mountings in solid wood and panel materials
€42.70
incl. VAT plus shipping costs
Article No. 706708
Festool V-groove cutter HS S8 D14/7/90°
Main areas of application: Available for making grooved decorations at 2 different angles
€19.70
incl. VAT plus shipping costs
Article No. 706709