TC Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm
Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For...
€46.80
incl. VAT plus shipping costs
Article No. 717786
TC Core Box Bit, Shank Ø 8 mm
Full-length cutting edges which also cut on the end, without bearing. For cutting decorative grooves, grip mouldings, juice grooves and similar. Can also be used for lettering.
€29.90
incl. VAT plus shipping costs
Article No. 717766
TC V-Groove and Engraving Bit, Shank Ø 8 mm
For engraving letters and cutting V grooves and decorative grooves. Also suitable for chamfering hardwood and panel materials.
€26.70
incl. VAT plus shipping costs
Article No. 717764
TC Trimming Bit, Ø 1/2"
To ensure clean cutting of decorative layers, the bearing diameter is exactly equal to the cutting diameter. Can also be used as a copy bit.
€38.50
incl. VAT plus shipping costs
Article No. 717760
TC Rebate Bit Set with 4 Ball Bearings, Ø 34.9 mm
By changing the bearing, you can cut clean rebates at depths of 7.9, 9.5, 11.1 and 12.7 mm. Ideal for rebating curved workpieces. Includes hex key for changing the bearings.
€69.90
incl. VAT plus shipping costs
Article No. 717590
TC Classic Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R...
Classic Roman profile with step and two identical radiuses. The step interrupts the swing of the two opposite radiuses and emphasises the middle of the profile.
€63.80
incl. VAT plus shipping costs
Article No. 717785
TC Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm,...
Roman profile with two identical radiuses, without rebate. Also suitable as a cove bit.
€52.80
incl. VAT plus shipping costs
Article No. 717782
TC Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 4.8 mm, Ø 31.8 mm
Ogee profile with two identical radiuses. Also suitable as a rounding-over bit.
€56.60
incl. VAT plus shipping costs
Article No. 717781
TC Panel-Raising Bit with Ball Bearing, Shank Ø 8 mm, Ogee, Ø...
Elegantly curved ogee profile for classic door and body panels. Profile depth 19 mm. For safe cutting and clean results, we recommend cutting at a low speed (max. 12,000 rpm) and in several passes on a router table. Ideal addition to our...
€87.10
incl. VAT plus shipping costs
Article No. 717778
TC Cavetto Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm, Ø...
For cavetto profiles, concave radius with step and rebate.
€59.90
incl. VAT plus shipping costs
Article No. 717678
TC Straight Plunge Cutters, Shank Ø 8 mm
Bottom- and side-cutting straight cutter with soldered-in TC centre tip. For grooving, rebating and mortising. Suitable for plunge. For work in abrasive materials such as particle boards, MDF, plywood, and hardwood.
€29.30
incl. VAT plus shipping costs
Article No. 717673
Festool Roundover cutter HW S8 D20,7/R4 KL
Main areas of application: One tool with two uses - by using the small 9.5 mm ball bearing (included with the delivered items), the router can be converted to an ovolo edge cutter
€66.90
incl. VAT plus shipping costs
Article No. 706670