Punches / Punch awls

1 of 2
Craftplus Rotary Punch, Interchangeable Components

Craftplus Rotary Punch, Interchangeable Components

Professional rotary punch with six interchangeable hole punches and anvil. This rotary punch easily punches perfect, even holes in leather, cardboard, webbing and similar materials. The big advantage is the interchangeable components, so...
€139.00

incl. VAT plus shipping costs

Article No. 745122

Revolving Punch Pliers

Revolving Punch Pliers

For punching leather, cardboard, rubber, plastic etc. Six punches with diameters of 2 / 2.5 / 3 / 3.5 / 4 and 4.5 mm. The diameter is displayed in the view window. Pressed, anti-skid corded steel shanks with stop. 270 g.
€15.90

incl. VAT plus shipping costs

Article No. 711995

Revolving Punch Pliers with Transmission, Oval Punches

Revolving Punch Pliers with Transmission

Makes strong and hard materials easy to work on. Professional-grade revolving punch pliers with six replaceable punches. With lever transmission (70 % less force required), nickel-plated surface, ergonomic plastic handles. Punch diameter...
€36.90

incl. VAT plus shipping costs

Article No. 711998

Revolving Punch Pliers with Transmission, Round Punches

Revolving Punch Pliers with Transmission

Makes strong and hard materials easy to work on. Professional-grade revolving punch pliers with six replaceable punches. With lever transmission (70 % less force required), nickel-plated surface, ergonomic plastic handles. Metric punch...
€28.70

incl. VAT plus shipping costs

Article No. 711993

Revolving »Two in One« Hole and Eyelet Pliers

Revolving »Two in One« Hole and Eyelet Pliers

With these pliers, first make an appropriately sized hole for the selected eyelet. Then set the required eyelet punch, insert the eyelets and press them together. The pliers are equipped with three punches with diameter 4.0 mm / 4.5 mm /...
€26.30

incl. VAT plus shipping costs

Article No. 729510

Craftplus Embossing Tool

Craftplus Embossing Tool

Made of stainless steel, the embossing tool has a handy plastic handle and a textured area to transfer the necessary thumb pressure to the leather during the rolling motion. The punchable leather is moistened, the embossing wheel (not...
€29.90

incl. VAT plus shipping costs

Article No. 745115

variants
€8.90

incl. VAT plus shipping costs

Article No. 745116

variants
€8.90

incl. VAT plus shipping costs

Article No. 745117

variants
€8.90

incl. VAT plus shipping costs

Article No. 745118

variants
€8.90

incl. VAT plus shipping costs

Article No. 745119

Ornamental Punches, 18-Piece Set

Ornamental Punches, 18-Piece Set

18-piece punch set with different patterns for decorating leather and wooden surfaces. Punches can also be heated for branding technique. Tool steel.
€33.90

incl. VAT plus shipping costs

Article No. 708311

Ivan Stamps, Ropes, 4-Piece Set

Ivan Stamps, Ropes, 4-Piece Set

By linking the different rope designs, you can create closed contours and borders on leather. The rope stamp can also be used to frame pictures and continuous patterns. Stamp width 4 mm. Content: R1 short straight (10 mm) / R2 long...
€20.20

incl. VAT plus shipping costs

Article No. 708058

Ivan Stamp Set, Basic Motifs, 6-Piece Set

Ivan Stamp Set, Basic Motifs, 6-Piece Set

Comprising the six most common motif stamps. With this well-assorted starter set, you can create borders, continuous patterns and pictures on leather. Content: A104 dotted drop, B197 plain square for contours, C431 half moon, P206 plain...
€28.60

incl. VAT plus shipping costs

Article No. 708056

Stamp Set, Stars, 3-Piece Set

Stamp Set, Stars, 3-Piece Set

For embossing leather. By putting together the individual stamps, you can create contours and continuous geometric patterns that cover a large area. Content: 1 (6 mm) / 2 (9.5 mm) / 3 (12.5 mm)
€24.50 €19.90

incl. VAT plus shipping costs

Article No. 708057

Ivan Stamps, Bevelled, Chequered, 3-Piece Set

Ivan Stamps, Bevelled, Chequered, 3-Piece Set

With this set you can press down the edge of a punched motif. In this way, the motif looks three-dimensional. Drop-shaped stamp for fine spaces. Content: beveller stamp, chequered 7 x 7 mm, beveller stamp, chequered 6.5 x 4.5 mm,...
€15.20

incl. VAT plus shipping costs

Article No. 708068

Ivan Stamps, Background Structure, 2-Piece Set

Ivan Stamps, Background Structure, 2-Piece Set

With this set of stamps, you can emboss leather with a deeper, more finely structured background, thus producing a more vivid and three-dimensional pattern. Content: Round: Ø 8.5 mm Drop shape: 6 x 3 mm
€11.30

incl. VAT plus shipping costs

Article No. 708106

Ivan Stamp, Wicker Pattern

Ivan Stamp, Wicker Pattern

With this geometric stamp, you can emboss large backgrounds to give the leather a wicker look. Dimensions 11.5 x 6 mm.
€5.60

incl. VAT plus shipping costs

Article No. 708104

Ivan Stamp, Geometric Pattern

Ivan Stamp, Geometric Pattern

With this geometric stamp, you can emboss attractive background patterns on leather. Dimensions 11.5 x 11.5 mm.
€5.60

incl. VAT plus shipping costs

Article No. 708105

Ivan Stamp, Sickle Motif, Small

Ivan Stamp, Sickle Motif

With this stamp, you can emboss borders and frames or structures on leather. Closed contours are also possible.
€5.60

incl. VAT plus shipping costs

Article No. 708102

Ivan Stamp, Wavy Borders

Ivan Stamp, Wavy Borders

With this stamp, you can emboss wavy edges and borders on leather. Closed contours are also possible. Dimensions 10 x 9 mm.
€5.60

incl. VAT plus shipping costs

Article No. 708101

Stamps, Barbed Wire Motif, 4-Piece Set

Stamps, Barbed Wire Motif, 4-Piece Set

With this stamp, you can emboss barbed wire-patterned edges and borders on leather. Closed contours are also possible. Content: Straight (10 mm) / straight with two thorns (13 mm) / straight with four thorns (13 mm) / curve
€27.30 €23.00

incl. VAT plus shipping costs

Article No. 708100

Ivan Stamp, Letters and Numbers, 36-Piece Set

Ivan Stamp, Letters and Numbers, 36-Piece Set

With the 36-piece set you have a full kit of all western letters and digits. The lower edge is marked to make it easier to use. Handlebar included. Letter height 6.4 mm (¼ inch).
€21.40

incl. VAT plus shipping costs

Article No. 708537

Tracing Film

Tracing Film

The tracing film is used to punch and transfer motifs to the leather. The heavy foil paper is waterproof, does not roll up when exposed to moisture, and even withstands strong pressure during tracing. This means that the motif stencils...
€3.90

incl. VAT plus shipping costs

Article No. 820264

Modelling Tool

Modelling Tool

For modelling reliefs as well as stamped borders and patterns on leather. With the spoon tip, you can smooth irregularities on the surface, while the ball tip allows fine details and lines as well as rebates. Ball tip Ø 1.4 mm, spoon...
€11.70

incl. VAT plus shipping costs

Article No. 708438

Ivan Buttonhole Punch, 6 mm

Ivan Buttonhole Punch, 6 mm

Please be sure to use a suitable hammer and a pad for striking to avoid damaging the tool.
€32.00

incl. VAT plus shipping costs

Article No. 745120

Point Strap End Punch, 30 mm

Point Strap End Punches

Punching tool made of high-quality carbon steel. The wear-resistant steel has a long edge life and allows accurate punched leather edges without reworking. For pointing belts and straps. Pointed arch shape available in three sizes.
variants
€30.90

incl. VAT plus shipping costs

Article No. 708424

Hole Punch Set with Circle Cutter, 19-Piece Set

Hole Punch Set with Circle Cutter, 19-Piece Set

Hole punch set consisting of rubberised hard plastic handle with spring-loaded drive head, 15 punch blades of different diameters, a spring-loaded centring tip and a circle cutter. The small blades are screwed onto the handle, while...
€179.00

incl. VAT plus shipping costs

Article No. 708347

Leather Drill Punch Awl with Punch, Ø 3 mm

Leather Drill Punch Awl with Punch, Ø 3 mm

Japanese drill-action punch awl for cutting clean holes in leather, plastic and cardboard. Very sharp, hardened, replaceable punches. Brass shank, beech handle.
€53.90

incl. VAT plus shipping costs

Article No. 716331

Hole Punch, Ø 2 mm

Hole Punches

Round punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€3.80

incl. VAT plus shipping costs

Article No. 729484

Arc Punch, Ø 3 mm

Arc Punches

Arc punch made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm² (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€5.90

incl. VAT plus shipping costs

Article No. 729474

Arc Punches, 5-Piece Set

Arc Punches, 5-Piece Set

High-quality set of arc punches made in Germany. Comes in sturdy, impregnated cotton bag with quick release strap. Suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to...
€57.90

incl. VAT plus shipping costs

Article No. 729473

Oblong Hole Punch, 17 x 11 mm

Oblong Hole Punches

Oblong hole punches made in Germany, suitable for punching cardboard, leather, rubber and other soft materials. Cutting edge hardened and tempered to HV 480 to 558 kp/mm2 (HRC 47-52), polished necks, shank machined and lacquered in red.
variants
€55.60 €47.50

incl. VAT plus shipping costs

Article No. 729497

Eyelet pliers, Ø 5 mm

Eyelet pliers, Ø 5 mm

Stable, professional-grade, chromed eyelet pliers with solid head, punching mechanism and depth stop. Depth stop fully adjustable from 5-13 mm. Max. stapling capacity 30 sheets of 65 g paper (3.4 mm). Ø punch hole 5.2 mm - for eyelets...
€48.20

incl. VAT plus shipping costs

Article No. 711996

Punch, Ø 1.2 mm

Punches

Fits leather drill punch awl No. 716331 .
variants
€8.50

incl. VAT plus shipping costs

Article No. 716333

variants
€8.60

incl. VAT plus shipping costs

Article No. 745125

variants
€8.60

incl. VAT plus shipping costs

Article No. 745126

variants
€8.60

incl. VAT plus shipping costs

Article No. 745127

variants
€8.60

incl. VAT plus shipping costs

Article No. 745128

variants
€8.60

incl. VAT plus shipping costs

Article No. 745129

variants
€8.60

incl. VAT plus shipping costs

Article No. 745130

€8.60

incl. VAT plus shipping costs

Article No. 745124

€7.30

incl. VAT plus shipping costs

Article No. 745123

Safety Hole Punch Changer for Rotary Punch

Safety Hole Punch Changer for Rotary Punch

For the easy replacement of hole punches. Fits Nos. 711995 , 711998 , 711993 and 729510 .
€4.70

incl. VAT plus shipping costs

Article No. 944641

Craftplus Multi-purpose Leather Hand Press

Craftplus Multi-purpose Leather Hand Press

The complete hand press solution from embossing to setting rivets, decorative hardware, pre-piercing seams and punching a wide variety of shapes and holes. Designed to work with a variety of specific tools and adapters while being...
€469.00

incl. VAT plus shipping costs

Article No. 745106

Cutting and Punching Pad, PP, 300 x 300 x 20 mm

Cutting and Punching Pad, PP, 300 x 300 x 20 mm

Robust and sturdy cutting and punching pad made of polypropylene, ideal as an impact-resistant base for cutting or punching leather. The surface is also gentle on the knives helping to achieve a perfect cut. Punching tools can penetrate...
€29.90

incl. VAT plus shipping costs

Article No. 745264

Stamp Adapter for Craftplus Multi-purpose Leather Hand Press

Stamp Adapter for Craftplus Multi-purpose Leather Hand Press

Fits No. 745106 . Matching embossing stamps and holder available separately.
€53.90

incl. VAT plus shipping costs

Article No. 745111

1 of 2