UJK Torx Screws, Fine Thread
UJK screws with Torx drive head (T20) and fine thread. Galvanised. Refill pack for screw storage box which is part of the UJK Pocket Hole Kit No. 704131 .
€4.90
incl. VAT plus shipping costs
Article No. 704182
UJK Torx Screws, Coarse Thread
UJK screws with Torx drive head (T20) and coarse thread. Galvanised. Refill pack for screw storage box which is part of the UJK Pocket Hole Kit No. 704131 .
€3.20
incl. VAT plus shipping costs
Article No. 704184
Zenterfix, Self-centring Hinge Drilling Bits
The spring-loaded guide bush is inserted into the screw hole of a hinge or fitting. This automatically centres the HSS core bit in the screw hole. In no time at all you have an accurately centred core hole, which allows you to fasten all...
€20.90
incl. VAT plus shipping costs
Article No. 706230
DICTUM Centrofix
This revolutionary spring-loaded centre punch allows you to pierce the centre of bored screw holes for fittings such as drawer pull-outs and hinges. When you press the hammer button, the hardened centering tip is punched into the wood...
€65.40
incl. VAT plus shipping costs
Article No. 717214
Rotatable Drill Stand with Chuck
Thanks to the mounted gear rim drill chuck, this is ideal for use with cordless screwdrivers. Swivelling support table for inclined bores up to 60°; the table is locked by two plastic handles. Height 360 mm, support table 170 x 150 mm,...
€99.90
incl. VAT plus shipping costs
Article No. 716183
PEANUT 2 Mushroom-shaped Connectors
Minimum material thickness 15.3 mm for 90° joints, 18 mm for 45° joints. Each mushroom-shaped connector must be secured with a wood screw with a 3.5 mm thread diameter (not included). The screw length is selected according to the...
€46.20
incl. VAT plus shipping costs
Article No. 714502
PEANUT Mini Jig MK2
For milling and drilling of PEANUT mushroom-shaped connectors. The Mini Jig enables the milling or drilling of one connector. Precision-milled and made of hard-wearing HPL. The fence can be mounted at 90° and 45° (for mitres). Incl....
€143.30
incl. VAT plus shipping costs
Article No. 714488
PEANUT Jig MK2
For milling and drilling up to four PEANUT mushroom-shaped connectors. Additional jig inserts (available as accessories, No. 714498 ) allow further connectors to be milled in the same work step. Maximum width between connectors 540 mm....
€439.00
incl. VAT plus shipping costs
Article No. 714489
€8.90
incl. VAT plus shipping costs
Article No. 714493
PEANUT Cutter for Mushroom-shaped Connectors
Solid carbide cutter for PEANUT mushroom-shaped connectors.
€75.90
incl. VAT plus shipping costs
Article No. 714490
PEANUT Drill Guide Bushes MK2
Fits PEANUT Mini Jig MK2 (No. 714488 ) and PEANUT Jig MK2 (No. 714489 ). Includes drill with depth stop.
€41.50
incl. VAT plus shipping costs
Article No. 714495
€46.80
incl. VAT plus shipping costs
Article No. 714498