Sawing

4 of 5
MICROJIG FitFinder

MICROJIG FitFinder

Der FitFinder zeigt automatisch die exakte Mitte durch Abtasten der Werkstückdick an, ganz ohne Messen und Rechnen. Bis zu einer Stärke von 75 mm können quadratische, rechteckige oder runde Querschnitte abgetastet und in sekundenschnelle...
€45.30

incl. VAT plus shipping costs

Article No. 704288

DICTUM Universal Clamp and Guide Rail, 610 mm

DICTUM Universal Clamp and Guide Rail

Guide rails are indispensable for straight edge work with hand circular saws, jigsaws or routers. The universally applicable DICTUM guide rail may be positioned quickly and securely with the integrated clamping system. The rigid...
variants
€30.50

incl. VAT plus shipping costs

Article No. 727342

Stop Block for DICTUM Universal Guide Rail

Stop Block for DICTUM Universal Guide Rail

In the case of insert milling or sawing, you need the entry and exit point of the tool. The travel path of the machine can be precisely limited with the stop block on the clamp and guide rail. Suitable for all DICTUM Universal Clamp and...
€17.70

incl. VAT plus shipping costs

Article No. 727351

UJK Dog Rail Clip, 2-Piece Set

UJK Dog Rail Clip, 2-Piece Set

These simple-looking spring clips firmly secure a guide rail to Parf dogs or other dogs, e.g. when sawing on a multifunction table. This prevents the guide rail from accidentally shifting due to a slippery or dusty surface or vibrations,...
€23.90

incl. VAT plus shipping costs

Article No. 707987

Kickback Protection for MICROJIG GRR-RIPPER 3D

Kickback Protection for MICROJIG GRR-RIPPER 3D

Grips the rear edge of the workpiece, increases the feed force, prevents the workpiece from being ejected and is adjustable to the respective workpiece thickness. Avoids tear-outs and splintering when used as »sacrificial wood«. Scope of...
€19.50

incl. VAT plus shipping costs

Article No. 718047

Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D

Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D

Extremely narrow pressure beam that guides thin strips up to a width of max. 3 mm safely between saw blade and longitudinal fence. A non-slip rubber coating prevents the workpiece from slipping and avoids pressure points on soft wood....
€19.50

incl. VAT plus shipping costs

Article No. 718048

Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set

Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set

Fits MICROJIG Pushblock GRR-RIPPER 3D (No. 718045 , 718046 ). 3 pieces, width 6, 13, 28 mm.
€41.20

incl. VAT plus shipping costs

Article No. 718050

MICROJIG Pushblock GRR-RIPPER 3D

MICROJIG Pushblock GRR-RIPPER 3D

The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push stick or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
variants
€69.50

incl. VAT plus shipping costs

Article No. 718045

Microdial Tapering Jig

Microdial Tapering Jig

For formatting panel material or producing tapered components. Create 2-, 4-, 6- or 8-sided tapered chair or table legs with unmatched precision, control and safety. For even more safety, you can work with up to two GRR-RIPPER ADVANCED...
€153.90

incl. VAT plus shipping costs

Article No. 718495

MAFELL Roller Edge Guide MF-UA

MAFELL Roller Edge Guide MF-UA

Fits MAFELL MT 55 cc, MF 26 cc, KSS 60, K 65 cc, KSS 50, K 55 cc.
€72.83

incl. VAT plus shipping costs

Article No. 721103K

Push Stick

Push Stick

On circular bench saws, bandsaws or table routers, small and narrow workpieces must be guided with the push stick. Length 42 cm.
€4.10

incl. VAT plus shipping costs

Article No. 727937

Featherboard with Clamping System for T-Slots, 2-Piece Set

Featherboard with Clamping System for T-Slots, 2-Piece Set

The pressure springs ensure precise workpiece guidance and additional safety when operating the woodworking machine. Whether used on a table router, circular saw or bandsaw, the amount of applied pressure is sustained over a wide area so...
€27.90

incl. VAT plus shipping costs

Article No. 714516

Milescraft »GrabberPRO« Push Block

Milescraft »GrabberPRO« Push Block

The adjustable push block is ideal for use on circular table saws, router tables, jointers and band saws. Designed for maximum control, precision and work safety. The many adjustment possibilities allow the workpiece to be guided over...
€42.30

incl. VAT plus shipping costs

Article No. 714609

Festool Cordless oscillator OSC 18 E-Basic VECTURO

Festool Cordless oscillator OSC 18 E-Basic VECTURO

Precise cutouts on the scribe mark, precisely guided plunge cuts on delicate surfaces and working with minimal dust generation, even above head height: This is what the cordless VECTURO OSC 18 stands for. Furthermore, the StarlockMax...
€399.00

incl. VAT plus shipping costs

Article No. 720966

MAFELL Guide Pocket F 160

MAFELL Guide Pocket F 160

For Guide Rails up to 1.6 m and accessories.
€88.89

incl. VAT plus shipping costs

Article No. 709448K

MAFELL Guide Pocket Set

MAFELL Guide Pocket Set

Fully equipped for exact cuts up to 2.4 m.
€448.75 €288.10

incl. VAT plus shipping costs

Article No. 704040K

Accessory Set for DICTUM Multifunction Tables

Accessory Set for DICTUM Multifunction Tables

Conveniently stored in a plastic case, the most important accessories for the MFT are always at hand and well organised. For precise positioning of workpieces or for formatting with a hand-held circular saw or router. Includes: 2...
€114.90

incl. VAT plus shipping costs

Article No. 729886

DICTUM Formatting Kit for MFT Pro

DICTUM Formatting Kit for MFT Pro

The set includes all important accessories for professional formatting on the DICTUM Multifunction Table PRO. With the multi-function bench dogs and the supplementary parts, cutting material, even with flat or pointed bevels, is easier...
€149.00

incl. VAT plus shipping costs

Article No. 729888

Festool Cordless table saw CSC SYS 50 EBI-Basic

Festool Cordless table saw CSC SYS 50 EBI

The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It's just as versatile in use, as it is tremendously convenient in its size. Make parallel cuts of up to 280 mm, cross-cut widths of up to 450 mm and angled...
variants
€1,959.00

incl. VAT plus shipping costs

Article No. 721384

Festool Sliding compound mitre saw KAPEX KS 60 E

Festool Sliding compound mitre saw KAPEX KS 60 E

The new KAPEX KS 60 dispenses with everything not needed for the job - such as every unnecessary gram of weight. With impressive features such as ergonomically positioned carrying handles, cord holder and transport safety device and an...
variants
€839.00

incl. VAT plus shipping costs

Article No. 704545

Festool Pendulum jigsaw TRION PS 300 EQ-Plus

Festool Pendulum jigsaw TRION PS 300 EQ-Plus

The TRION pendulum jigsaw - thoroughly robust, powerful and ergonomic. The three-way saw blade guide with parallel adjustable carbide jaws guarantees absolute precision while the splinter guard reduces reworking. And, with perfect...
€375.00

incl. VAT plus shipping costs

Article No. 706858

Festool Cordless pendulum jigsaw PSC 420 EB-Basic CARVEX

Festool Cordless pendulum jigsaw PSC 420 EB-Basic CARVEX

With these two, even tight curves feel like straight lines. With 3800 strokes per minute, the high-performance, energy-efficient EC-TEC motor gives you powerful, fast sawing progress every time. Always guaranteed: Utmost precision thanks...
€407.00

incl. VAT plus shipping costs

Article No. 720278

Festool Cordless pendulum jigsaw PSBC 420 EB-Basic CARVEX

Festool Cordless pendulum jigsaw PSBC 420 EB-Basic CARVEX

With these two, even tight curves feel like straight lines. With 3800 strokes per minute, the high-performance, energy-efficient EC-TEC motor gives you powerful, fast sawing progress every time. Always guaranteed: Utmost precision thanks...
€407.00

incl. VAT plus shipping costs

Article No. 720475

Festool Pendulum jigsaw CARVEX PSB 420 EBQ-Plus

Festool Pendulum jigsaw CARVEX PSB 420 EBQ-Plus

Ergonomic, lightweight and handy - work quickly and comfortably in any position with the CARVEX. The machine operates at 3800 strokes per minute for inimitably powerful cutting strokes and unbeatable profile-cutting capacity. It is...
variants
€429.00

incl. VAT plus shipping costs

Article No. 720478

Festool Table saw TKS 80 EBS

Festool Table saw TKS 80 EBS

Every year approximately 4,000 people are injured on circular saws, corresponding to 16 injuries per working day. Around 26% of serious accidents even result in an accident pension (German Social Accident Insurance (DGUV) statistics...
€2,219.00

incl. VAT plus shipping costs

Article No. 729372

Festool Table saw TKS 80 EBS-Set

Festool Table saw TKS 80 EBS-Set

Every year approximately 4,000 people are injured on circular saws, corresponding to 16 injuries per working day. Around 26% of serious accidents even result in an accident pension (German Social Accident Insurance (DGUV) statistics...
€3,639.00

incl. VAT plus shipping costs

Article No. 729373

Festool Universal saw blade 216x2,3x30 W36

Festool Universal saw blade 216x2,3x30 W36

Main areas of application: For working with every type of wood and wood composite as well as building panels, gypsum fibre boards and soft plastic. With alternating teeth and a medium chip angle, this saw blade is suitable for both rip...
variants
€99.00

incl. VAT plus shipping costs

Article No. 704548

Festool Kickback Stop FS-RSP

Festool Kickback Stop FS-RSP

Can also be used as guide stop. Used as a rear and front stop position on guide rail FS/2.
€18.50

incl. VAT plus shipping costs

Article No. 706622

Festool Parallel Side Fence PA-TS 55

Festool Parallel Side Fence PA-TS 55

The parallel stop makes it easy to produce parallel cuts along the edge of the workpiece. Ideal for separating longer workpieces Workpiece widths can range from 177 mm to 220 mm when fitted to side of motor Workpiece widths can range...
€53.30

incl. VAT plus shipping costs

Article No. 706623

Festool Splinter Guard SP-TS 55/5

Festool Splinter Guard SP-TS 55/5

The splinter guard is fitted in place of the viewing window and facilitates splinter-free cuts to the right of the saw blade. When the machine is running, cuts are made in the inserted splinter guard so that it adapts to fit the saw...
€15.60

incl. VAT plus shipping costs

Article No. 706625

Festool Universal saw blade 160x2,2x20 W28

Festool Universal saw blade 160x2,2x20 W28

Main areas of application: With alternating teeth and a medium chip angle, this saw blade is suitable for both rip cuts and cross cuts.
variants
€75.30

incl. VAT plus shipping costs

Article No. 706626

€135.00

incl. VAT plus shipping costs

Article No. 706638

€17.70

incl. VAT plus shipping costs

Article No. 706639

€57.90

incl. VAT plus shipping costs

Article No. 706640

€9.20

incl. VAT plus shipping costs

Article No. 706641

variants
€11.90

incl. VAT plus shipping costs

Article No. 706642

€7.90

incl. VAT plus shipping costs

Article No. 706644

Festool Jigsaw blade S 75/4/5 Wood Basic, 5 Pieces

Festool Jigsaw blade S 75/4/5 Wood Basic, 5 Pieces

Main areas of application: For outstanding results in wooden materials with high-grade HCS tool steel. Wood Basic. For quick cuts in wood where high precision is not required.
variants
€10.30

incl. VAT plus shipping costs

Article No. 706648

Festool Jigsaw blade HS 105/1 BI/5 Metal Steel/Stainless Steel, 5 Pieces

Festool Jigsaw blade HS 105/1 BI/5 Metal Steel/Stainless...

Main areas of application: Rippled basic form made from HCS bimetal - ideal for processing aluminium, non-ferrous metals and steel. Metal Steel/stainless steel. For processing aluminium, non-ferrous metals and steel.
€22.90

incl. VAT plus shipping costs

Article No. 706649

Festool Jigsaw blade S 75/4 K/5 Wood Curves, 5 Pieces

Festool Jigsaw blade S 75/4 K/5 Wood Curves, 5 Pieces

Main areas of application: For outstanding results in wooden materials with high-grade HCS tool steel. Wood Curves. Ideal for curves - even extremely tight radii are possible.
€12.90

incl. VAT plus shipping costs

Article No. 706650

Festool Jigsaw blade S 75/2,8/5 Wood Straight Cut, 5 Pieces

Festool Jigsaw blade S 75/2,8/5 Wood Straight Cut, 5 Pieces

Main areas of application: For outstanding results in wooden materials with high-grade HCS tool steel. Wood Straight Cut. For highly precise perpendicular cuts thanks to extremely sharp Japanese teeth - the fibres are firstly scored,...
variants
€16.90

incl. VAT plus shipping costs

Article No. 706651

Festool Jigsaw blade S 75/2,5/5 Wood Fine Cut, 5 Pieces

Festool Jigsaw blade S 75/2,5/5 Wood Fine Cut, 5 Pieces

Main areas of application: For outstanding results in wooden materials with high-grade HCS tool steel. Wood Fine Cut. For precisely cut and splinter-free surfaces
€14.30

incl. VAT plus shipping costs

Article No. 706652

Festool Jigsaw blade HS 75/3 BI/5 Plastics Solid Material, 5 Pieces

Festool Jigsaw blade HS 75/3 BI/5 Plastics Solid Material, 5...

Main areas of application: For outstanding results in plastics with high-grade bimetal. Plastics Solid materials. For the toughest demands such as plastic solid material and fibre-reinforced plastics
€22.20

incl. VAT plus shipping costs

Article No. 706653

Festool Universal saw blade 210x2,4x30 W36

Festool Universal saw blade 210x2,4x30 W36

Main areas of application: For working with every type of wood and wood composite as well as building panels, gypsum fibre boards and soft plastic. With alternating teeth and a medium chip angle, this saw blade is suitable for both rip...
variants
€96.30

incl. VAT plus shipping costs

Article No. 706876

€16.20

incl. VAT plus shipping costs

Article No. 706895

Festool Tischzugsäge CS 70 EBG-Set PRECISIO

Festool Tischzugsäge CS 70 EBG-Set PRECISIO

Kapp- oder Längsschnitte. Mobil oder stationär. Innenausbau, Möbel- oder Messebau. Vielseitige Aufgaben, eine Lösung: die PRECISIO CS 70 mit niedrigem Gewicht und durchdachten Funktionen sägt Werkstücke bis zu 70 mm Materialstärke. Und...
variants
€3,769.00

incl. VAT plus shipping costs

Article No. 706955

Festool Fine tooth saw blade 216x2,3x30 W48

Festool Fine tooth saw blade 216x2,3x30 W48

Main areas of application: For clean and splinter-free cross cuts in solid wood as well as for coated or veneered panels
€119.00

incl. VAT plus shipping costs

Article No. 720152

4 of 5