€11.50
incl. VAT plus shipping costs
Article No. 727294
MICROJIG FitFinder
Der FitFinder zeigt automatisch die exakte Mitte durch Abtasten der Werkstückdick an, ganz ohne Messen und Rechnen. Bis zu einer Stärke von 75 mm können quadratische, rechteckige oder runde Querschnitte abgetastet und in sekundenschnelle...
€45.30
incl. VAT plus shipping costs
Article No. 704288
DICTUM Universal Clamp and Guide Rail
Guide rails are indispensable for straight edge work with hand circular saws, jigsaws or routers. The universally applicable DICTUM guide rail may be positioned quickly and securely with the integrated clamping system. The rigid...
€30.50
incl. VAT plus shipping costs
Article No. 727342
Stop Block for DICTUM Universal Guide Rail
In the case of insert milling or sawing, you need the entry and exit point of the tool. The travel path of the machine can be precisely limited with the stop block on the clamp and guide rail. Suitable for all DICTUM Universal Clamp and...
€17.70
incl. VAT plus shipping costs
Article No. 727351
UJK Dog Rail Clip, 2-Piece Set
These simple-looking spring clips firmly secure a guide rail to Parf dogs or other dogs, e.g. when sawing on a multifunction table. This prevents the guide rail from accidentally shifting due to a slippery or dusty surface or vibrations,...
€23.90
incl. VAT plus shipping costs
Article No. 707987
Kickback Protection for MICROJIG GRR-RIPPER 3D
Grips the rear edge of the workpiece, increases the feed force, prevents the workpiece from being ejected and is adjustable to the respective workpiece thickness. Avoids tear-outs and splintering when used as »sacrificial wood«. Scope of...
€19.50
incl. VAT plus shipping costs
Article No. 718047
Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D
Extremely narrow pressure beam that guides thin strips up to a width of max. 3 mm safely between saw blade and longitudinal fence. A non-slip rubber coating prevents the workpiece from slipping and avoids pressure points on soft wood....
€19.50
incl. VAT plus shipping costs
Article No. 718048
Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set
Fits MICROJIG Pushblock GRR-RIPPER 3D (No. 718045 , 718046 ). 3 pieces, width 6, 13, 28 mm.
€41.20
incl. VAT plus shipping costs
Article No. 718050
MICROJIG Pushblock GRR-RIPPER 3D
The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push stick or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
€69.50
incl. VAT plus shipping costs
Article No. 718045
Microdial Tapering Jig
For formatting panel material or producing tapered components. Create 2-, 4-, 6- or 8-sided tapered chair or table legs with unmatched precision, control and safety. For even more safety, you can work with up to two GRR-RIPPER ADVANCED...
€153.90
incl. VAT plus shipping costs
Article No. 718495
€72.83
incl. VAT plus shipping costs
Article No. 721103K
Push Stick
On circular bench saws, bandsaws or table routers, small and narrow workpieces must be guided with the push stick. Length 42 cm.
€4.10
incl. VAT plus shipping costs
Article No. 727937