Shaper Artist Pens, 6 Pieces
This is the same high-quality artist pen that ships with Shaper Trace. It's a fine detail 0.5 mm felt tip artist pen, perfect for intricate drawings. Keep a few in the workshop and a few on your desk!
€14.28
incl. VAT plus shipping costs
Article No. 721490K
![Shaper ⅛" x ½" Up-Spiral Flat Router Bit](https://cdn.dictum.com/media/image/21/f6/6c/721492K_01_P_WE_8_Shaper_Spiralnutfr_ser_x_jpg_c1_200x200.jpg "Shaper ⅛" x")
Shaper ⅛" x ½" Up-Spiral Flat Router Bit
With its small diameter, the ⅛” (3.175 mm) spiral bit is ideal for working out the finest details. Thanks to its solid carbide composition, it remains sharp even after hours of use. Ideal for complex routing jobs and the finest details...
€32.13
incl. VAT plus shipping costs
Article No. 721492K
Shaper ¼” x ¾” Up-Spiral Flat Router Bit, Two Flutes
A real all-rounder router bit for Origin: With its optimised geometry and solid carbide composition, it effortlessly masters hard and soft woods, MDF and plywood. Thanks to the positive spiral flute, the chips are discharged upwards and...
€32.13
incl. VAT plus shipping costs
Article No. 721493K
PantoRouter
The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
€1,789.00
incl. VAT plus shipping costs
Article No. 720757
MICROJIG FitFinder
Der FitFinder zeigt automatisch die exakte Mitte durch Abtasten der Werkstückdick an, ganz ohne Messen und Rechnen. Bis zu einer Stärke von 75 mm können quadratische, rechteckige oder runde Querschnitte abgetastet und in sekundenschnelle...
€45.30
incl. VAT plus shipping costs
Article No. 704288
Sliding Table for DICTUM Universal Guide Rail
Plastic table with guide stop for DICTUM Universal Clamp and Guide Rails. Hand circular saws, for example, or other machines can be mounted on the table (although the user must bore mounting holes additionally) in order to be slid along...
€28.20
incl. VAT plus shipping costs
Article No. 727354
DICTUM Universal Guide Rail Set 710
For milling work, the guide rails are firmly clamped to the panels to be machined. The cross connectors allow the rails to be mounted at a 90° angle, e.g. for pocket milling. The rigid aluminium profile with its T-slots offers additional...
€99.90
incl. VAT plus shipping costs
Article No. 727479
Featherboard for DICTUM Universal Guide Rail
Whether for milling, on the saw or sanding equipment, the featherboard presses the workpiece securely to the length stop of the machine. Mounted on the DICTUM Universal Clamp and Guide Rail it can be used universally. Dimension 193 x 80...
€12.60
incl. VAT plus shipping costs
Article No. 727352
Stop Block for DICTUM Universal Guide Rail
In the case of insert milling or sawing, you need the entry and exit point of the tool. The travel path of the machine can be precisely limited with the stop block on the clamp and guide rail. Suitable for all DICTUM Universal Clamp and...
€17.70
incl. VAT plus shipping costs
Article No. 727351
Microdial Tapering Jig
For formatting panel material or producing tapered components. Create 2-, 4-, 6- or 8-sided tapered chair or table legs with unmatched precision, control and safety. For even more safety, you can work with up to two GRR-RIPPER ADVANCED...
€153.90
incl. VAT plus shipping costs
Article No. 718495
Wixey Digital Setting Gauge for Woodworking Machines
Designed for woodworking, this depth setting gauge is useful for many applications. The easy-to-read display is simple to operate. The measuring tip can also be used to take depth measurements in narrow boreholes. Applications: Distance...
€27.90
incl. VAT plus shipping costs
Article No. 721056
Featherboard with Clamping System for T-Slots, 2-Piece Set
The pressure springs ensure precise workpiece guidance and additional safety when operating the woodworking machine. Whether used on a table router, circular saw or bandsaw, the amount of applied pressure is sustained over a wide area so...
€27.90
incl. VAT plus shipping costs
Article No. 714516
MICROJIG Zeroplay 2-step Plunge Bit, 6.35 mm Shank
Stepped router bit for drilling and routing. Diameter a = 12.7 mm, diameter b = 6.35 mm. Rounding R 1.6 mm at the transitions for tear-free and visually appealing holes and slots. Counterbored holes: Use it in the drill press and obtain...
€61.90
incl. VAT plus shipping costs
Article No. 725029
€529.00
incl. VAT plus shipping costs
Article No. 706660
Festool Copying ring KR-D 27/OF 900
Main areas of application: Copying ring for gauging routing templates
€14.20
incl. VAT plus shipping costs
Article No. 706662
€55.60
incl. VAT plus shipping costs
Article No. 706665
Festool Copying ring KR-D 27,0/OF 1400
Main areas of application: Copying ring for gauging routing templates, inserted in router without using tools
€22.80
incl. VAT plus shipping costs
Article No. 706666
Festool Collet SZ-D 12,0/OF 1400/2000/2200
Main areas of application: Dustproof clamping collets for routers OF 1400 and OF 2200. Open-ended spanner width 24 mm
€64.90
incl. VAT plus shipping costs
Article No. 706668
€44.80
incl. VAT plus shipping costs
Article No. 706669
Festool Roundover cutter HW S8 D20,7/R4 KL
Main areas of application: One tool with two uses - by using the small 9.5 mm ball bearing (included with the delivered items), the router can be converted to an ovolo edge cutter
€66.90
incl. VAT plus shipping costs
Article No. 706670
Festool Roundover cutter S8 HW R2 D20-KL OFK
Main areas of application: Edge-trimming cutter for 2 mm edges with 10° transition
€71.50
incl. VAT plus shipping costs
Article No. 706676
Festool Aluminium cutter HS S8 D5/NL23
Main areas of application: HS spiral groove cutter for cutting grooves for draining water in aluminium profiles
€19.90
incl. VAT plus shipping costs
Article No. 706678
Festool Drilling cutter HW S8 D8/19
Main areas of application: For cutouts of any kind - without pre-drilling, the drilling cutter goes right through the coating material. Through the subsequent routing of contours, splinters on the edges of the coatings are effectively...
€33.90
incl. VAT plus shipping costs
Article No. 706679
Festool Edge trimming cutter HW S8 D12,7/NL25
Main areas of application: Edge trimming cutter with ball bearing below - this allows coatings in and on panel edges to be flush cut. Because of the small ball bearing, even inner radii of 15 mm can be flush cut
€63.20
incl. VAT plus shipping costs
Article No. 706680
Festool Through-hole drill HW S8 D5/30
Main areas of application: "Through-hole drilling bits for rows of holes; suitable for cutting through panels with its longer HW drill bit"
€35.70
incl. VAT plus shipping costs
Article No. 706681
Festool Flute cutter HW S8 D25,5/R6,35 KL
Main areas of application: For every flute cutter, Festool offers a roundover cutter with the same radius (except for R 20). Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles
€48.20
€44.90
incl. VAT plus shipping costs
Article No. 706684
Festool Groove cutter HW S8 D3/6
Main areas of application: More security against small diameter bits breaking because of the low vibration all tungsten carbide cutter design. The partially ground standard tungsten carbide blade provides an increased service life when...
€38.40
incl. VAT plus shipping costs
Article No. 706688
Festool Groove cutter HW S8 D10/25
Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade
€39.90
incl. VAT plus shipping costs
Article No. 706693
Festool Groove cutter HW S12 D13,2/35 PLANET
Main areas of application: Long router bit service life even for plunge cutting because of the soldered standard tungsten carbide blade. Together with the routing aids, automatic door seals can be routed on the front
€92.90
incl. VAT plus shipping costs
Article No. 706700
Festool Disk groove cutter HW D40x1,5
Main areas of application: Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm. The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm
€24.90
incl. VAT plus shipping costs
Article No. 706701
Festool Script cutter HS S8 D11/60°
Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€45.20
incl. VAT plus shipping costs
Article No. 706706
Festool Script cutter HW S8 D11/60°
Main areas of application: A fine-grained wood is suggested for script cutting because the power tool can then be guided without jerking
€56.90
incl. VAT plus shipping costs
Article No. 706707
Festool T-slot cutter HW S8 D10,5/NL13
Main areas of application: For routing T-grooves, picture slots and keyhole mountings in solid wood and panel materials
€42.70
incl. VAT plus shipping costs
Article No. 706708
Festool V-groove cutter HS S8 D14/7/90°
Main areas of application: Available for making grooved decorations at 2 different angles
€19.70
incl. VAT plus shipping costs
Article No. 706709
Festool Roundover cutter HW R2-OFK 500
Main areas of application: For rounding plastic or solid wood edging
€68.70
incl. VAT plus shipping costs
Article No. 706710
Festool Chamfer cutter HW 30°-OFK 500
Main areas of application: For chamfer milling plastic or solid wood edging
€61.80
incl. VAT plus shipping costs
Article No. 706716
Festool Edge trimming cutter HW/KLS D22/8-OFK
Main areas of application: For flush trimming plastic or solid wood edging. With ball bearing guide
€76.40
incl. VAT plus shipping costs
Article No. 706718
€28.80
incl. VAT plus shipping costs
Article No. 706719
Festool Cutter spindle S8 1,5-5 KL16
Main areas of application: Cutter spindle suitable for cutting grooves together with (1.5-5mm) slot cutters
€31.00
incl. VAT plus shipping costs
Article No. 706894
Festool Cutter spindle S8 1,5-5 D14
Main areas of application: Cutter spindle suitable for cutting grooves together with (1.5-5mm) slot cutters
€23.90
incl. VAT plus shipping costs
Article No. 706897
Festool Router OF 1400 EBQ-Plus
The handy multi-talent: The OF 1400 router weighs just 4.5 kg - one of the lowest machine weights in its class. The 70 mm routing stroke is impressive when making recesses for fittings or routing with templates. It also has a...
€858.00
incl. VAT plus shipping costs
Article No. 729827
Festool Router OF 2200 EB-Plus
More powerful, easier to use, increased comfort and safer - the OF 2200 offers the greatest low-end torque, the highest precision and the greatest ergonomic comfort. No matter what your task is - with the OF 2200, you have the solution...
€1,179.00
incl. VAT plus shipping costs
Article No. 729828
Festool Edge Router OFK 500 Q-Plus R2
Chamfering, rounding off, profiling and grooving - evenly, cleanly and without splinters with the OFK 500 edge router. Weighs just 1.4 kg and, thanks to the ideal centre of gravity, is particularly handy, even for vertical and horizontal...
€465.00
incl. VAT plus shipping costs
Article No. 729830
Festool Oberfräse OF 2200 EB-Set
Kräftiger, einfacher, komfortabler und sicherer - die OF 2200 bietet stärksten Durchzug, größte Präzision und hohen ergonomischen Komfort. Wie Ihre Aufgabe auch aussieht - mit der OF 2200 halten Sie die Lösung in der Hand. Ihre Vorteile:...
€1,699.00
incl. VAT plus shipping costs
Article No. 729829
Festool Modul-Kantenfräse MFK 700 EQ/B-Plus
Wunderbar wandelbar. Die modulare Bauweise macht die MFK 700 zu einem kostensparenden Alleskönner: Man wechselt nur den Frästisch, nicht die ganze Fräse - und ist für alle Aufgaben rund um die Eck- und Kantenbearbeitung optimal gerüstet....
€519.00
incl. VAT plus shipping costs
Article No. 729834
Festool Light module LM-OF 1010 R
The LED light ring is directly integrated into the base panel and provides shadow free lighting directly on the workpiece all the way around. The separate battery unit is removable as required and can be recharged via the USB-C...
€37.90
incl. VAT plus shipping costs
Article No. 721503
Festool Router OF 1010 REBQ-FS-Set+Box
The OF 1010 R router enables you to work with maximum precision. The double-sided column clamp makes it extremely torsionally rigid and the parallel side fence can be precisely adjusted without any tools. The easily accessible working...
€1,296.00
incl. VAT plus shipping costs
Article No. 721505
Festool Router OF 1010 REBQ-Set
The OF 1010 R router enables you to work with maximum precision. The double-sided column clamp makes it extremely torsionally rigid and the parallel side fence can be precisely adjusted without any tools. The easily accessible working...
€895.00
incl. VAT plus shipping costs
Article No. 721508