Featherboard with Clamping System for T-Slots, 2-Piece Set
The pressure springs ensure precise workpiece guidance and additional safety when operating the woodworking machine. Whether used on a table router, circular saw or bandsaw, the amount of applied pressure is sustained over a wide area so...
€27.90
incl. VAT plus shipping costs
Article No. 714516
MICROJIG Zeroplay 2-step Plunge Bit, 6.35 mm Shank
Stepped router bit for drilling and routing. Diameter a = 12.7 mm, diameter b = 6.35 mm. Rounding R 1.6 mm at the transitions for tear-free and visually appealing holes and slots. Counterbored holes: Use it in the drill press and obtain...
€61.90
incl. VAT plus shipping costs
Article No. 725029
€529.00
incl. VAT plus shipping costs
Article No. 706660
Festool Copying ring KR-D 27/OF 900
Main areas of application: Copying ring for gauging routing templates
€14.20
incl. VAT plus shipping costs
Article No. 706662
€55.60
incl. VAT plus shipping costs
Article No. 706665
Festool Copying ring KR-D 27,0/OF 1400
Main areas of application: Copying ring for gauging routing templates, inserted in router without using tools
€22.80
incl. VAT plus shipping costs
Article No. 706666
Festool Collet SZ-D 12,0/OF 1400/2000/2200
Main areas of application: Dustproof clamping collets for routers OF 1400 and OF 2200. Open-ended spanner width 24 mm
€64.90
incl. VAT plus shipping costs
Article No. 706668
€44.80
incl. VAT plus shipping costs
Article No. 706669
Festool Roundover cutter HW S8 D20,7/R4 KL
Main areas of application: One tool with two uses - by using the small 9.5 mm ball bearing (included with the delivered items), the router can be converted to an ovolo edge cutter
€66.90
incl. VAT plus shipping costs
Article No. 706670
Festool Roundover cutter S8 HW R2 D20-KL OFK
Main areas of application: Edge-trimming cutter for 2 mm edges with 10° transition
€71.50
incl. VAT plus shipping costs
Article No. 706676
Festool Aluminium cutter HS S8 D5/NL23
Main areas of application: HS spiral groove cutter for cutting grooves for draining water in aluminium profiles
€19.90
incl. VAT plus shipping costs
Article No. 706678
Festool Drilling cutter HW S8 D8/19
Main areas of application: For cutouts of any kind - without pre-drilling, the drilling cutter goes right through the coating material. Through the subsequent routing of contours, splinters on the edges of the coatings are effectively...
€33.90
incl. VAT plus shipping costs
Article No. 706679