TC Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm,...
Roman profile with two identical radiuses, without rebate. Also suitable as a cove bit.
€52.80
incl. VAT plus shipping costs
Article No. 717782
TC Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 4.8 mm, Ø 31.8 mm
Ogee profile with two identical radiuses. Also suitable as a rounding-over bit.
€56.60
incl. VAT plus shipping costs
Article No. 717781
TC Panel-Raising Bit with Ball Bearing, Shank Ø 8 mm, Ogee, Ø...
Elegantly curved ogee profile for classic door and body panels. Profile depth 19 mm. For safe cutting and clean results, we recommend cutting at a low speed (max. 12,000 rpm) and in several passes on a router table. Ideal addition to our...
€87.10
incl. VAT plus shipping costs
Article No. 717778
TC Cavetto Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm, Ø...
For cavetto profiles, concave radius with step and rebate.
€59.90
incl. VAT plus shipping costs
Article No. 717678
TC Straight Plunge Cutters, Shank Ø 8 mm
Bottom- and side-cutting straight cutter with soldered-in TC centre tip. For grooving, rebating and mortising. Suitable for plunge. For work in abrasive materials such as particle boards, MDF, plywood, and hardwood.
€29.30
incl. VAT plus shipping costs
Article No. 717673
TC Dovetail Cutter, Shank Ø 8 mm, 14°, Ø 14.3 mm
Bottom- and side-cutting dovetail shaped cutter for milling dovetail corner joints and sliding dovetail joints. To embed miter slot tracks with a 14° dovetail shaped section like the UJK dovetailed mitre slot track No. 706584 . For work...
€27.40
incl. VAT plus shipping costs
Article No. 717791
TC Dovetail Cutter, Shank Ø 8 mm, 17°, Ø 20 mm
With this dovetail cutter for use with a router, you can not only make joints more quickly and precisely, but also a lot more easily. The router cuts the grout into the wood and the matching sliding dovetail is added to the counterpart...
€37.90
incl. VAT plus shipping costs
Article No. 717792
Dovetail Cutter, Shaft Ø 8 mm, 8°
For cutting dovetail mortises and joints. Made of carbide, which gives this cutter a long service life even when used with hardwood.
€28.90
incl. VAT plus shipping costs
Article No. 720760
UJK Precision Mitre Gauge & Fence
This mitre gauge system is made from 5 mm steel plate and features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°. Simple to adjust with a spring loaded plunger stop and able to be set at any other angle between 0-90° as...
€164.00
incl. VAT plus shipping costs
Article No. 706583
UJK Hold Down Clamp
Excellent for making jigs. These hold down clamps are designed to be used with the ujk T-tracks. The large star knob allows workpieces to be secured more easily. When used with the ujk T-tracks, this results in a max. clamping width of...
€24.90
incl. VAT plus shipping costs
Article No. 706580
UJK Router Table Insert Plate
This 10 mm aluminium insert plate for router tables measures 229 x 305 and is designed to fit the UJK Technology router table tops. It is supplied with a removable central insert ring with a 38 mm diameter hole and a wrench. This...
€135.00
incl. VAT plus shipping costs
Article No. 706574
UJK Universal T-Track
A very useful aluminium T-Track which can be utilized for all manner of routing jigs, clamps and devices. Bar cross-section external dimensions 19 x 9.5 mm, slot 8.9 x 6.4 mm and T-section 13.6 mm wide. Available in 610 mm and 915 mm...
€22.50
incl. VAT plus shipping costs
Article No. 706581