T-Screws M8, 10-Piece Set
The screw head is shaped like a sliding nut and thus offers flexible use in T-tracks. For fastening workpieces, hold-down clamps or other auxiliary and clamping devices. The screw head slides in brace profiles and slotted rails, e.g. No....
€5.90
incl. VAT plus shipping costs
Article No. 730855
Clamping Sleeve Adapter for Piher Mini Quick
The clamping sleeve for 20 mm holes allows the Mini Quick one-handed clamp to be used as an insertion clamp or horizontal clamping element on e.g. multifunction tables. Insertion clamp: Remove the fixed bracket of the Mini Quick...
€27.80
incl. VAT plus shipping costs
Article No. 730094
Slot Nut M8, 2 Pieces
Versatile slot nut made of aluminium with 45 mm length. Ideal for making auxiliary and clamping devices combined with guide rails. One threaded hole M8 with brass pressure screw for fixing the slot nut in guide rails for example and one...
€6.50
incl. VAT plus shipping costs
Article No. 714668
Guide Rail
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions 30 x...
€12.90
incl. VAT plus shipping costs
Article No. 714672
Slot Nut 200 mm, M6/M8
Slot nut with 200 mm length for constructing auxiliary and clamping devices combined with guide rails. The long slot nut is also suitable as a glide, e.g. for cross or angle fences on machine tables. The four M6 and three M8 internal...
€8.90
incl. VAT plus shipping costs
Article No. 714670
Sliding Rail, 300 mm
Adjustable sliding rail with square cross-section (19 x 9.5 mm) for guiding in T-tracks (e.g. Nos. 714672 , 714673 ). The 300 mm long rail contains four M6 threads for fastening stops, auxiliary devices, etc. The play between the sliding...
€12.90
incl. VAT plus shipping costs
Article No. 714671
Hattori Hold-down Clamp, Height Adjustable
Hold down clamp milled from solid aluminium with adjustable counterpressure part (three locking positions). This ensures the ideal position and maximum clamping force at any clamping height between 0 and 80 mm. A large star handle allows...
€29.90
incl. VAT plus shipping costs
Article No. 714650
Veritas T-Slot Fence Flip-Stop
T-slot length stop that can be fitted onto the T-track (No. 703899 ) for example, to facilitate the trimming of same-length workpieces for example. The stop can stay permanently on the T-track and be folded up when not in use.
€28.80
incl. VAT plus shipping costs
Article No. 703309
MICROJIG Handle Bridge Kit for Pushblock GRR-RIPPER
The unique arch design gives the handle four points of contact to evenly distribute the downward pressure. Oblong holes allow you to angle the handle and thus comfortably maintain an even pressure. This promotes fatigue-free work through...
€19.60
incl. VAT plus shipping costs
Article No. 725026
MICROJIG Pushblock GRR-RIPPER2 Go
The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push block or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
€43.30
incl. VAT plus shipping costs
Article No. 725025
MICROJIG ZEROPLAY Mitre Bars
The ZEROPLAY mitre bars enable the construction of highly precise mitre gauges and auxiliary devices. Simply insert them into the T-rail or U-rail, adjust the width, test, done! The two-part bar can be varied in width and thus adapted to...
€20.60
incl. VAT plus shipping costs
Article No. 725028
MICROJIG Zeroplay 2-step Plunge Bit, 6.35 mm Shank
Stepped router bit for drilling and routing. Diameter a = 12.7 mm, diameter b = 6.35 mm. Rounding R 1.6 mm at the transitions for tear-free and visually appealing holes and slots. Counterbored holes: Use it in the drill press and obtain...
€61.90
incl. VAT plus shipping costs
Article No. 725029