Hattori Universal Fence Clamp
These clamps are used when the clamping arm of a conventional clamp cannot rest flat on the workpiece surface. The ideal clamp for auxiliary fences and devices. Even workpieces that are difficult to clamp, e.g. sculpture blanks, can be...
€11.90
incl. VAT plus shipping costs
Article No. 714517
Push Stick
On circular bench saws, bandsaws or table routers, small and narrow workpieces must be guided with the push stick. Length 42 cm.
€4.10
incl. VAT plus shipping costs
Article No. 727937
Featherboard with Clamping System for T-Slots, 2-Piece Set
The pressure springs ensure precise workpiece guidance and additional safety when operating the woodworking machine. Whether used on a table router, circular saw or bandsaw, the amount of applied pressure is sustained over a wide area so...
€27.90
incl. VAT plus shipping costs
Article No. 714516
Milescraft »GrabberPRO« Push Block
The adjustable push block is ideal for use on circular table saws, router tables, jointers and band saws. Designed for maximum control, precision and work safety. The many adjustment possibilities allow the workpiece to be guided over...
€42.30
incl. VAT plus shipping costs
Article No. 714609
€39.00
incl. VAT plus shipping costs
Article No. 708087
UJK Adjustable Work Support Dogs, 4-Piece Set
The 30 mm diameter anti-slip supports hold the workpiece in place. They are height-adjustable and lockable. This allows uneven workpieces to be levelled for machining. The 20 mm pin fits into the hole pattern of the multifunctional...
€54.90
incl. VAT plus shipping costs
Article No. 730846
UJK Reamer for 20 mm Bench Dog Holes
For precise work it is essential that accessories fit accurately into the multifunctional table’s hole grid. Depending on the tabletop material, a change in wood moisture content or protruding wood fibres can cause the accessories to...
€28.50
incl. VAT plus shipping costs
Article No. 730847
UJK Bench Dogs for Guide Rails, Pair
These 20 mm diameter bench dogs are equipped with a T-screw for fastening to the underside of guide rails. When formatting on multi-function tables with a plunge saw, this eliminates the annoying bench dogs that normally hit the sides of...
€55.20
incl. VAT plus shipping costs
Article No. 730849
UJK Parf Anchor Dogs, 18 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€20.90
incl. VAT plus shipping costs
Article No. 715434
UJK Parf Anchor Dogs, 32 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€24.00
incl. VAT plus shipping costs
Article No. 730845
In-line Clamp
Clamp with rack feed, made of anodised aluminium. The large rotary wheel enables fine and sensitive pressure regulation. Equipped with a replaceable plug-in pin on the underside, it is fixed in the dog holes of workbenches or...
€74.90
incl. VAT plus shipping costs
Article No. 714637
T-Screws M6, 10-Piece Set
The screw head is shaped like a sliding nut and thus offers flexible use in T-tracks. For fastening workpieces, hold-down clamps or other auxiliary and clamping devices. The screw head slides in brace profiles and slotted rails, e.g. No....
€3.90
incl. VAT plus shipping costs
Article No. 730852