UJK Parf Chamfer Tool
This specially designed tool cuts a neat, small chamfer around the precise 20 mm dog hole made by the UJK Technology 20 mm cutter, as part of using the Parf Guide System. You can also use it on the Festool MFT/3 table. A shallow chamfer...
€34.50
incl. VAT plus shipping costs
Article No. 720654
Silbergleit Dry Slip-additive
Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and dry...
€10.80
(Content: €43.20 / 1 litre)
incl. VAT plus shipping costs
Article No. 706178
UJK Parfguide System MK II
The Parf drilling system is a very precise and fast method for making your own perforated plates for e.g. multifunction tables and workbenches. The 20 mm boreholes in an exact, right-angled grid equipped with Parf Bank Pins or Parf Super...
€229.00
incl. VAT plus shipping costs
Article No. 720774
Kickback Protection for MICROJIG GRR-RIPPER 3D
Grips the rear edge of the workpiece, increases the feed force, prevents the workpiece from being ejected and is adjustable to the respective workpiece thickness. Avoids tear-outs and splintering when used as »sacrificial wood«. Scope of...
€19.50
incl. VAT plus shipping costs
Article No. 718047
Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D
Extremely narrow pressure beam that guides thin strips up to a width of max. 3 mm safely between saw blade and longitudinal fence. A non-slip rubber coating prevents the workpiece from slipping and avoids pressure points on soft wood....
€19.50
incl. VAT plus shipping costs
Article No. 718048
MICROJIG Pushboard GRR-RIP BLOCK
The well thought-out pushboard has non-slip rubber studs on the underside. The clever touch is the four lowerable hooks that serve as kickback protection and, depending on the application, can be pushed up or down to hook the workpiece....
€40.20
incl. VAT plus shipping costs
Article No. 718049
Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set
Fits MICROJIG Pushblock GRR-RIPPER 3D (No. 718045 , 718046 ). 3 pieces, width 6, 13, 28 mm.
€41.20
incl. VAT plus shipping costs
Article No. 718050
UJK Surface Cam Clamps, Ø 20 mm, 2-Piece-Set
The surface cam clamps are fitted on the 20 mm Parf Dogs or bench dogs to prevent the workpieces from being pulled up and slipping. When milling wooden slats or Domino dowels, the cam clamps secure the workpiece in place on the...
€19.80
incl. VAT plus shipping costs
Article No. 715521
Klemmsia Slot Nut with External Thread
Practical slot nut for Klemmsia Hold-down Clamp Adapter Basic and Basic Mini. Suitable for PantoRouter No. 720556 , 720557 , 720757 , 720755 ; DICTUM Multifunction Table No. 707796 ; DICTUM T-Track No. 707764 , 707765 , 707766 . Thread...
€5.10
incl. VAT plus shipping costs
Article No. 708119
DICTUM Self-clamping Connecting Bushing Ø 20 mm, M8
The 18 mm long bushing with internal thread acts as a connector between self-made auxiliary devices, e.g. fences or templates, which are mounted in the hole grid of a workbench or multifunction table. A circumferential rubber O-ring...
€4.90
incl. VAT plus shipping costs
Article No. 729506
Protective Screen for MICROJIG GRR
Fits GRR-RIPPER 3D push block and GRR RIP Block. The transparent protective shield can also be used as a parallel fence.
€19.40
incl. VAT plus shipping costs
Article No. 718493
MICROJIG Pushblock GRR-RIPPER 3D
The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push stick or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
€69.50
incl. VAT plus shipping costs
Article No. 718045