Miscellaneous Accessories

1 of 10
Underframe for DICTUM Multifunction Table

Underframe for DICTUM Multifunction Table

For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,131.00

incl. VAT plus shipping costs

Article No. 707796

Sliding Table for DICTUM Universal Guide Rail

Sliding Table for DICTUM Universal Guide Rail

Plastic table with guide stop for DICTUM Universal Clamp and Guide Rails. Hand circular saws, for example, or other machines can be mounted on the table (although the user must bore mounting holes additionally) in order to be slid along...
€28.20

incl. VAT plus shipping costs

Article No. 727354

Cross Connector for DICTUM Universal Guide Rail, 4-Piece Set

Cross Connector for DICTUM Universal Guide Rail, 4-Piece Set

90° Connector for DICTUM Universal Guide Rail. Angled or square templates can be assembled. Ideal e.g., for pocket grooves.
€19.20

incl. VAT plus shipping costs

Article No. 727359

Longitudinal Connector for DICTUM Universal Guide Rail

Longitudinal Connector for DICTUM Universal Guide Rail

For extending the DICTUM Universal Guide Rails. Two or more universal guide rails can be connected to each other with the longitudinal connectors.
€15.20

incl. VAT plus shipping costs

Article No. 727358

Workpiece Hold Down Clamp for DICTUM Universal Guide Rail

Workpiece Hold Down Clamp for DICTUM Universal Guide Rail

Hold down clamps and stops in two versions e.g. for series boring on drill presses. Workpieces can be quickly and precisely positioned and securely clamped when used in combination with the DICTUM Universal Clamp and Guide Rails. Maximum...
€39.50

incl. VAT plus shipping costs

Article No. 727353

90° Try Square for DICTUM Universal Guide Rail

90° Try Square for DICTUM Universal Guide Rail

The square converts the universal clamp and guide rail into a 90° angle. The try square is screwed directly to the clamp rail. This allows rapid material cutting without the need for extensive scribing. Drilling screws included.
€8.30

incl. VAT plus shipping costs

Article No. 727345

Star Knob Screws with T-slot Nuts for DICTUM Universal Guide Rail, 6-Piece Set

Star Knob Screws with T-slot Nuts for DICTUM Universal Guide...

You can make your own fixing devices for the DICTUM Universal Guide Rails using this set. Incl. 6 star knob screws, washers and T-slot nuts each. Thread length 8 mm, clamping range on rail (without washers) 5.5-10 mm.
€4.90

incl. VAT plus shipping costs

Article No. 727348

Lever Clamp Extension for DICTUM Universal Guide Rail

Lever Clamp Extension for DICTUM Universal Guide Rail

The 175 mm long lever fits all DICTUM Universal Clamp and Guide Rails. It extends the lever and facilitates the fastening or releasing of the guide rail
€5.60

incl. VAT plus shipping costs

Article No. 727350

Wide Chucks for DICTUM Universal Guide Rail, Pair

Wide Chucks for DICTUM Universal Guide Rail, Pair

Use of the wider chucks distributes the clamping pressure on the workpiece more evenly and prevents any pressure marks. You can, for example, attach wooden jaw faces to the chuck via the two drill-holes on each chuck jaw. The chuck is...
€6.50

incl. VAT plus shipping costs

Article No. 727349

DICTUM Universal Clamp and Guide Rail, 610 mm

DICTUM Universal Clamp and Guide Rail

Guide rails are indispensable for straight edge work with hand circular saws, jigsaws or routers. The universally applicable DICTUM guide rail may be positioned quickly and securely with the integrated clamping system. The rigid...
variants
€30.50

incl. VAT plus shipping costs

Article No. 727342

Rail Ferrules for DICTUM Universal Guide Rail, Pair

Rail Ferrules for DICTUM Universal Guide Rail, Pair

For clamping the DICTUM Universal Guide Rail to the workpiece. T-slot nuts allow clamping across the rail. Maximum clamping height 50 mm. Jaw depth 18 mm.
€37.80

incl. VAT plus shipping costs

Article No. 727357

DICTUM Universal Guide Rail, 710 mm

DICTUM Universal Guide Rail

The guide rail is clamped securely to the workpiece with the track clamps (No. 727357 ) for linear milling and saw work. For greater distances, multiple rails can be assembled with longitudinal connectors (No. 727358 ). These rails can...
€23.50

incl. VAT plus shipping costs

Article No. 727356

1 of 10