Tabletop for DICTUM MFT, Hole Pattern & T-slot, Multi-layer Beech
- Dimensions 1114 x 734 x 19 mm mm
- Weight 13 kg
| Article no. | 714290 |
| Brand | - |
Accessories
DICTUM Lever Clamp for Guide Rails, Jaw Opening 160 mm
For vibration-proof clamping due to precisely manufactured, wear-resistant ratchet mechanism. The profile of the galvanised fixed bracket matches the 12 x 8 mm guide grooves. For secure fixing of guide rails and for clamping on machine...
€36.50
incl. VAT plus shipping costs
Article No. 705643
DICTUM All-steel Bar Clamp for Guide Rails, Jaw Opening 120 mm
The cross-section of the fixed bracket is geared to the 12 x 8 mm guiding grooves. For secure fixing of guide rails and for clamping on workbenches with T-Track. Wooden handle. Fits: DICTUM T-Tracks No. 707764 , 707765 , 707766...
€17.10
incl. VAT plus shipping costs
Article No. 705644
Piher One-handed Clamp for Guide Rails
It can be used with one hand thanks to a pistol-shaped handle with ratchet mechanism. For secure fixing of guide rails and for clamping on machine and work tables with T-Track. Suitable for guide rails with 12 x 8 cm tracks.
€24.90
incl. VAT plus shipping costs
Article No. 721000
Star Knob Screws with T-slot Nuts for DICTUM Universal Guide...
You can make your own fixing devices for the DICTUM Universal Guide Rails using this set. Incl. 6 star knob screws, washers and T-slot nuts each. Thread length 8 mm, clamping range on rail (without washers) 5.5-10 mm.
€4.90
incl. VAT plus shipping costs
Article No. 727348
Klemmsia Hold-down Clamp Adapter, Basic, Shaft 19 mm, Clamping...
The body of the hold-down clamp is the same as that of the Klemmsia clamps. It can be used for clamping down workpieces or converted into a standard clamp by means of the attached screw mechanism in the perforated stud system. It can...
€41.90
incl. VAT plus shipping costs
Article No. 708125
DICTUM Multifunction Bench Dogs MBH20
With the freely positionable MBH20 bench dogs and a plunge saw with guide rail, you can transform the multifunctional table PRO into a formatting platform that is equal to a sliding table saw. Due to the circumferential T-slot system on...
€40.10
incl. VAT plus shipping costs
Article No. 728775
DICTUM Stainless Steel Bench Dog with Workpiece Protection,...
Diameter 19.9 mm for exact fit in 20 mm holes, e.g. in the DICTUM Multifunction Table or the Festool MFT. The support ring Ø 25 mm offers stability and a good stop surface. In addition, O-rings made of abrasion-free silicone can be...
€15.90
incl. VAT plus shipping costs
Article No. 729542
DICTUM Star Knob Screw with Pressure Plate, M8 x 30
Thanks to the solid pressure plate made of stainless steel and with a diameter of 40 mm, auxiliary devices can be fixed safely and quickly in a hole grid of a workbench or multifunction table. The easy-to-use star knob screw facilitates...
€11.50
incl. VAT plus shipping costs
Article No. 729504
DICTUM All-steel Bar Clamp, Pivot Handle for Guide Rails, Jaw...
Version with high-quality, ergonomic plastic handle, which can simply be folded away when space is limited. The cross-section of the fixed bracket is geared to the 12 x 8 mm guiding grooves. For secure fixing of guide rails and for...
€18.50
incl. VAT plus shipping costs
Article No. 715441
Klemmsia Slot Nut with External Thread
Practical slot nut for Klemmsia Hold-down Clamp Adapter Basic and Basic Mini. Suitable for PantoRouter No. 720556 , 720557 , 720757 , 720755 ; DICTUM Multifunction Table No. 707796 ; DICTUM T-Track No. 707764 , 707765 , 707766 ....
€5.10
incl. VAT plus shipping costs
Article No. 708119
DICTUM Self-clamping Connecting Bushing Ø 20 mm, M8
The 18 mm long bushing with internal thread acts as a connector between self-made auxiliary devices, e.g. fences or templates, which are mounted in the hole grid of a workbench or multifunction table. A circumferential rubber O-ring...
€4.90
incl. VAT plus shipping costs
Article No. 729506
T-slot Nut for 8 mm Groove, M8, Light Version
T-slot nut with pressure ball for T-track profiles for use with the DICTUM Multifunction Table PRO (e.g. No. 728760 ). Self-made clamping and auxiliary devices can thus be mounted quickly and easily on the table construction. Fits e.g....
€2.40
incl. VAT plus shipping costs
Article No. 729000
Milescraft »TrackClamps«, 2-Piece Set
Compact, lightweight track clamps. For e.g. Festool guide rails or T-tracks with min. 12 mm inner width and 7 mm slot opening.
€26.50
incl. VAT plus shipping costs
Article No. 714540
DICTUM Bench Dog Extension Ø 20 mm, Pair
For extending the DICTUM Stainless Steel Bench Dogs (No. 728774 , 729542 , 728773 ). Thanks to their 61 mm long shaft, the short bench hooks can also be used to fix guide rails. Shaft length 61 mm, thread M8 x 10 mm.
€12.90
incl. VAT plus shipping costs
Article No. 729532
DICTUM Adapter for Aluminium Profile for MFT
Auxiliary fences made of 40 x 40 mm aluminium profiles can be positioned easily and precisely in 20 mm bores thanks to the freely movable adapters. Especially on multifunctional table tops with 20 mm perforation, this greatly simplifies...
€16.90
incl. VAT plus shipping costs
Article No. 729528
T-Screws M8 x 50 mm, 10-Piece Set
The screw head is shaped like a sliding nut and thus offers flexible use in T-tracks. For fastening workpieces, hold-down clamps or other auxiliary and clamping devices. The screw head slides in brace profiles and slotted rails, e.g. No....
€5.90
incl. VAT plus shipping costs
Article No. 730856
Hattori Hold-down Clamp, Height Adjustable
Hold down clamp milled from solid aluminium with adjustable counterpressure part (three locking positions). This ensures the ideal position and maximum clamping force at any clamping height between 0 and 80 mm. A large star handle allows...
€29.90
incl. VAT plus shipping costs
Article No. 714650
DICTUM Aluminium Bench Dogs with Workpiece Protection, Pair, Flat
When working with a plunge saw or router for example, aluminium bench dogs have the advantage that they are easily machinable and thus there is no damage to the machine and the saw blade or router bit in case of collisions. Sometimes,...
€14.20
incl. VAT plus shipping costs
Article No. 714688
Piher One-handed Clamp for Guide Rails
It can be used with one hand thanks to a pistol-shaped handle with ratchet mechanism. For secure fixing of guide rails and for clamping on machine and work tables with T-Track. Suitable for guide rails with 12 x 8 cm tracks.
€24.90
incl. VAT plus shipping costs
Article No. 730099
Suitable for
DICTUM Multifunction Table PRO, T-slot 8 mm, Multi-layer Beech
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid or in the tabletop’s 8 mm T-slots or in the encircling T-slot on the aluminium frame for infinitely variable angle settings with the DICTUM...
€1,239.00
incl. VAT plus shipping costs
Article No. 714291