Shinwa Carpenter’s Sliding Bevel with Degree Scale
This carpenter’s sliding bevel combines the functions of sliding bevel and graduator. On the inside of the stop is a metric scale and on the outside a degree scale for precise angle setting. The tongue can be swivelled through the 180°...
€44.00
incl. VAT plus shipping costs
Article No. 717227
Shinwa Feeler Gauge
Precise feeler gauge made of rustproof steel for checking distances. 25 blades with a length of 65 mm provide blade thicknesses ranging from 0.03 mm to 1.00 mm.
€25.60
incl. VAT plus shipping costs
Article No. 717544
Dovetail Marking Jig
This marking jig facilitates scribing dovetail joints. One side 1:5 (outside) and 1:6 (inside) for softwood, the other side 1:8 (outside) and 1:10 (inside) for hardwood.
€7.90
incl. VAT plus shipping costs
Article No. 715433
Carpenter's Squares, Set
The set includes the Alpha Marking Tool (No. 707316 ), a German Carpenter's Square (No. 707279 ) and an Aluminium Sliding Bevel (No. 707317 ).
€133.30
incl. VAT plus shipping costs
Article No. 708088
Dovetail Templates, Set
Templates with four different angles for scribing dovetails. The integrated pointers enable exact positioning on centre lines. Thanks to the size (120 x 60 mm) and the solid stop, the stencils are comfortable to use. Suitable for wood...
€29.90
incl. VAT plus shipping costs
Article No. 714605
Woodraphic Dovetail Saw Guide System
Magnetic saw guide for making dovetail joints. The contact surface has a smaller cross-section compared to other saw guides. This has the great advantage that back saws such as precision or dovetail saws with a smaller saw blade width do...
€56.00
incl. VAT plus shipping costs
Article No. 714681
Woodraphic Mitre Guide 90°/45°
Magnetic saw guide for making square cuts or 45° mitres. The contact surface has a smaller cross-section compared to other saw guides. This has the great advantage that back saws such as precision or dovetail saws with a smaller saw...
€56.00
incl. VAT plus shipping costs
Article No. 714683
Woodraphic Scriber Gauge
Scribing caliper for simple and precise marking of workpieces. Makes marking parallel edges, 90° and 45° angles a breeze. Marking rule with 0-100 mm scale. Length scale with vernier, reading accuracy 0.05 mm. Incl. fine adjustment and...
€109.00
incl. VAT plus shipping costs
Article No. 714684
Kreg Setup and Spacer Shims
A seven-piece set of spacer plates for precise joints, for example, between drawer fronts or doors. Two shims each of 2.3 mm, 3.1 mm, 6.3 mm and one with 19.1 mm are held together by a magnet. Combine shims of different thicknesses to...
€19.90
incl. VAT plus shipping costs
Article No. 704319
Precision Knife Edge Square
For checking the squareness of an edge, using the light-gap method. The blade is bevelled on both sides. Blade cross-section 18 x 5.5 mm, stainless steel. Accuracy grade 00 in accordance with DIN 875, squareness tolerance of 0.004 mm,...
€27.90
incl. VAT plus shipping costs
Article No. 707280
Precision Knife Edge Ruler
The best way of checking if a surface is flat is with this straight edge, using the light-gap method. The rules are bevelled on the measurement edge and have a textured rubber grip. Stainless steel, accuracy grade 00 in accordance with...
€18.60
incl. VAT plus shipping costs
Article No. 707290
Veritas Aluminium Straightedges
Extremely lightweight flat rule, wide enough to stand on edge unsupported. Very useful for setting up devices such as machine tables, router stops or to control flatness. Accuracy 0.075 mm over the entire length. Note: Better use a...
€30.80
incl. VAT plus shipping costs
Article No. 703860