Veritas

Products from Veritas

Veritas

Veritas® Tools Inc., based in Ottawa, Canada, is a world leader in woodworking tool design innovation and is the manufacturing arm of Lee Valley Tools Ltd., a leading North American retailer of fine tools. Lee Valley Manufacturing Ltd. was incorporated in 1985 and later became Veritas® Tools Inc. Today, with 250 products and more than 100 patents in lines that include woodworking planes, sharpening equipment, marking and measuring tools, router tables, drilling accessories and more, they have become a leader in product development to meet the needs of discerning woodworkers.

4 of 20
Veritas Ruler Stop

Veritas Ruler Stop

The stopper is slid on a metal ruler or the leg of a square and fixed in the desired position with a knurled screw. The slip-proof stopper made of aluminium is suitable for rulers up to a thickness of 1.2 mm and a width of 22 - 28.5 mm.
€17.00

incl. VAT plus shipping costs

Article No. 703632

Veritas Rip Tenon Saw

Veritas Rip Tenon Saw

For all rip cuts, such as mortise and tenon joints. With its teeth that cut on the push stroke, this large tenon saw cuts extremely well and 100 mm deep.
€139.00

incl. VAT plus shipping costs

Article No. 703598

Shaft Clamp for Veritas Dual Marking Gauge

Shaft Clamp for Veritas Dual Marking Gauge

This useful shaft clamp connects the two independently adjustable guide rods of the Dual Marking Gauge No. 703673 , allowing the guide rods to be shifted simultaneously and in parallel. This allows you to preserve identical mortise or...
€13.60

incl. VAT plus shipping costs

Article No. 703604

Veritas Router Plane, high-carbon steel Blade

Veritas Router Plane, high-carbon steel Blade

Precision tool for creating and finishing grooves, flat recesses or any work requiring an area cut to a precise depth. Its generous dimensions and solid construction make this plane very easy to use. A depth stop allows the adjustment of...
 
€192.90

incl. VAT plus shipping costs

Article No. 703697

€89.00

incl. VAT plus shipping costs

Article No. 701855

Veritas Marking Gauge with Separate Micro Adjust

Veritas Marking Gauge with Separate Micro Adjust

The separate micro-adjustment mechanism can be set even when the guide rod is locked. Guarantees precise and simple adjustment in micrometre range. The single-bevelled, circular knife delivers clean and reliable results, even with end...
€52.60

incl. VAT plus shipping costs

Article No. 717537

Veritas Pocket Layout Square, 1 ½ Inch

Veritas Pocket Layout Square, 1 ½ Inch

Machined from solid aluminium, anodized and laser etched on both sides, this layout square is only 38 mm on a side. The base has a 3.2 mm offset on one edge and 6.4 mm on the other. The square has a rule scale in inch as well as angle...
€11.30

incl. VAT plus shipping costs

Article No. 728867

Veritas Sharpening Device, for Small Plane Blades

Veritas Sharpening Device, for Small Plane Blades

This mount enables easier sharpening of short blades such as spokeshaves, reversing blades or small violin planes. Two magnets and a moveable fence hold the blades securely, the die-cast aluminium handle extends the blade and enables...
€26.20

incl. VAT plus shipping costs

Article No. 702110

Camber Roller Assembly for Veritas Sharpening System II

Camber Roller Assembly for Veritas Sharpening System II

This accessory guide with barrel-shaped roller allows for honing slight curves into plane blade edges whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly of the Veritas sharpening...
€29.90

incl. VAT plus shipping costs

Article No. 703839

Veritas Narrow Blade Clamp for Veritas Sharpening System II

Veritas Narrow Blade Clamp for Veritas Sharpening System II

Convert your standard Veritas Sharpening System II (No. 703666 ) into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for the...
€59.60

incl. VAT plus shipping costs

Article No. 703843

Veritas Adapter for Sharpening System II, Mortise Chisel

Veritas Adapter for Sharpening System II, Mortise Chisel

This adapter extends the clamping height of the Veritas Sharpening System II for clamping mortise chisels with up to 18 mm blade thickness. By opening the brass screw on the top of the sharpening aid, you can insert the adapter and...
€14.50

incl. VAT plus shipping costs

Article No. 703904

Veritas Planing Stop

Veritas Planing Stop

Aluminium stop for fixing boards and flat workpieces on the benchtop. The side positioning eliminates the need for inconvenient hold down clamps that reach into the surface of the workpiece. This allows you to work on the entire surface....
€28.60

incl. VAT plus shipping costs

Article No. 703600

4 of 20