Veritas

Products from Veritas

Veritas

Veritas® Tools Inc., based in Ottawa, Canada, is a world leader in woodworking tool design innovation and is the manufacturing arm of Lee Valley Tools Ltd., a leading North American retailer of fine tools. Lee Valley Manufacturing Ltd. was incorporated in 1985 and later became Veritas® Tools Inc. Today, with 250 products and more than 100 patents in lines that include woodworking planes, sharpening equipment, marking and measuring tools, router tables, drilling accessories and more, they have become a leader in product development to meet the needs of discerning woodworkers.

3 of 20
Extended Cover for Veritas Twin-Screw Vice

Extended Cover for Veritas Twin-Screw Vice

Expands the maximum spacing of your Veritas Twin-Screw Vice (No. 705816 ) to 610 mm. Comes with a longer chain (1350 mm). Without front and rear cover endpieces.
€44.00

incl. VAT plus shipping costs

Article No. 705851

Veritas T-Track Stop

Veritas T-Track Stop

For securing boards and flat workpieces. This stop, suitable for Veritas T-Track, is designed to be positioned side-on and is therefore ideal for optimal working on workpiece surfaces. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€10.10

incl. VAT plus shipping costs

Article No. 703902

Veritas T-Track Clamp

Veritas T-Track Clamp

This clamp can secure boards up to 5 cm thick. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€23.10

incl. VAT plus shipping costs

Article No. 703901

Veritas T-Track Swivel Stop

Veritas T-Track Swivel Stop

This support is designed especially for round and irregular shapes. You can attach your own stops to the support via two drill holes and fix them in the required position. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€16.60

incl. VAT plus shipping costs

Article No. 703903

Veritas Thickness Gauge, 228 mm

Veritas Thickness Gauge

The outside callipers for precise wall thickness measurement of deep and thin turned objects. Adjustable spring reset mechanism prevents unintentional loss of the measurement when pulling the callipers out of the turned object - ideal...
variants
€61.60

incl. VAT plus shipping costs

Article No. 717533

Veritas Block and Tackle System for Bending Strap

Veritas Block and Tackle System for Bending Strap

Bending large cross-sections requires considerable force. A block and tackle system, e.g. on self-made bending devices, significantly facilitates the work. Only for use with a 51 mm wide bending strap No. 702310 . Rope 4 mm, transmission...
€28.40

incl. VAT plus shipping costs

Article No. 702311

Veritas Bench Pin

Veritas Bench Pin

Very useful for securing self-made forms to perforated plates or as a bench dog replacement. Has an O-ring stop at one end. Diameter 19 mm, length 152 mm. Galvanised.
€11.50

incl. VAT plus shipping costs

Article No. 702312

Veritas Bending Strap, 32 mm

Veritas Bending Strap

When bending wood with steam, the wood fibres on the outside of the object are stabilised by the steel strap that prevents cracking. To restrict the wooden objects lengthwise, you attach self-made stops or clamping elements, e.g. No....
variants
€41.60

incl. VAT plus shipping costs

Article No. 702309

Veritas Carver’s Screw

Veritas Carver’s Screw

The threaded brass coupling of this carver’s screw is slightly conical and more finely worked than on conventional carver’s screws. This allows secure mounting of very delicate objects. Plus, you can simply close the mounting holes after...
€28.20

incl. VAT plus shipping costs

Article No. 716375

Veritas Marking Gauge with Separate Micro Adjust

Veritas Marking Gauge with Separate Micro Adjust

The separate micro-adjustment mechanism can be set even when the guide rod is locked. Guarantees precise and simple adjustment in micrometre range. The single-bevelled, circular knife delivers clean and reliable results, even with end...
€52.60

incl. VAT plus shipping costs

Article No. 717537

Veritas Ruler Stop

Veritas Ruler Stop

The stopper is slid on a metal ruler or the leg of a square and fixed in the desired position with a knurled screw. The slip-proof stopper made of aluminium is suitable for rulers up to a thickness of 1.2 mm and a width of 22 - 28.5 mm.
€17.00

incl. VAT plus shipping costs

Article No. 703632

Veritas Router Plane, high-carbon steel Blade

Veritas Router Plane, high-carbon steel Blade

Precision tool for creating and finishing grooves, flat recesses or any work requiring an area cut to a precise depth. Its generous dimensions and solid construction make this plane very easy to use. A depth stop allows the adjustment of...
 
€192.90

incl. VAT plus shipping costs

Article No. 703697

3 of 20