Pfeil

Products from Pfeil

Pfeil

The production of Pfeil® knives is based on an old artisan tradition. The company was founded in 1902 in Langenthal as a knife smithy. Production of the first carving tools was started in around 1942. The high quality of the tools soon led to great popularity with professional carvers, but also with hobby carvers and schools both at home and abroad.

With over 700 forms and sweeps, Pfeil offers the largest and most variable product range. The products of the worlds leading manufacture of fine carving tools are made from specially alloyed, hard tool steel, forged and ground on precision machines, heat-treated in an electric furnace and sharpened by hand ready-for-use. The blades are uniformly hardened to 59-61 HRC along their entire length, the break-proof oiled ash handles are mounted with inner ferrules. Only indigenous woods and solvent-free oils are used.
Your advantage:

  • Quick delivery straight from stock
  • Lifetime warranty on material and workmanship! (Damage caused by improper use is not covered by this warranty)
1 of 4
Pfeil Marking Knife

Pfeil Marking Knife

The prism-shaped blade of this marking knife allows scribing to the left or right of a guide. The handle of oiled walnut has a hollowed finger area close to the nib for a better grip. Stick tang blade hardened to 60 HRC. Suitable for...
 
€21.30

incl. VAT plus shipping costs

Article No. 717113

Pfeil Woodworking Knives, Blade Width 9 mm

Pfeil Woodworking Knives, Blade Width 9 mm

Made of alloyed Swiss steel. Approx. 59-60 HRC, double bevel.
variants
 
€15.20

incl. VAT plus shipping costs

Article No. 700403

Pfeil Woodworking Knives, Blade Width 6 mm

Pfeil Woodworking Knives, Blade Width 6 mm

Made of alloyed Swiss steel. Approx. 59-60 HRC, double bevel.
variants
 
€15.20

incl. VAT plus shipping costs

Article No. 700402

Pfeil Woodworking Knives, Blade Width 15 mm

Pfeil Woodworking Knives, Blade Width 15 mm

Made of alloyed Swiss steel. Approx. 59-60 HRC, double bevel.
variants
 
€15.20

incl. VAT plus shipping costs

Article No. 700405

Pfeil Woodworking Knives, Blade Width 3.5 mm

Pfeil Woodworking Knives, Blade Width 3.5 mm

Made of alloyed Swiss steel. Approx. 59-60 HRC, double bevel.
variants
 
€15.20

incl. VAT plus shipping costs

Article No. 700401

Pfeil Carving Tools, Ash, 12-Piece Set

Pfeil Carving Tools, Ash, 12-Piece Set

Set of twelve Pfeil carving tools for medium-sized figures, lettering and fine ornaments, compiled by the Sculptor's School in Brienz. Sweep 1 (flat) / 8 mm; sweep 1 S (flat/skew) / 8 mm; sweep 5 / 8 mm; sweep 5 / 20 mm; sweep 7 / 6 mm;...
 
€377.00

incl. VAT plus shipping costs

Article No. 700890

Pfeil Woodworking Knives, Blade Width 12 mm

Pfeil Woodworking Knives, Blade Width 12 mm

Made of alloyed Swiss steel. Approx. 59-60 HRC, double bevel.
variants
 
€15.20

incl. VAT plus shipping costs

Article No. 700404

Pfeil Allongee Gouges, Sweep 5 / 50 mm

Pfeil Allongee Gouges

With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
variants
 
€85.40

incl. VAT plus shipping costs

Article No. 701275

Pfeil Drawknife, Downswept and Curved Blade

Pfeil Drawknife, Downswept and Curved Blade

Ideal for removing large amounts of stock from straight surfaces (like a roughing plane) or working on slightly concave surfaces. Forged from carbon steel, therefore easy to sharpen Slightly curved blade reduces cutting force Blade gets...
 
€99.90

incl. VAT plus shipping costs

Article No. 700966

Pfeil Woodworking Knives, with Precious Wood Handle, Blade Width 3.5 mm

Pfeil Woodworking Knives, with Precious Wood Handle

Made of alloyed Swiss steel. Approx. 59-60 HRC, double bevel.
variants
 
€24.90

incl. VAT plus shipping costs

Article No. 700390

Pfeil Woodworking Knives, Blade Width 19 mm

Pfeil Woodworking Knives, Blade Width 19 mm

Made of alloyed Swiss steel. Approx. 59-60 HRC, double bevel.
variants
 
€15.20

incl. VAT plus shipping costs

Article No. 700406

variants
 
€25.40

incl. VAT plus shipping costs

Article No. 700794

Pfeil Carving Tool, Gouge, Fishtail, Thin Blades, Sweep 7F / 6 mm

Pfeil Carving Tool, Gouge, Fishtail, Thin Blades

Thanks to their conical form, fishtail gouges are used for backcutting in relief carving and for general finishing work. Their projecting corners make it easy to cut within narrow recesses, in which the angle of the gouge can still be...
variants
 
€33.40

incl. VAT plus shipping costs

Article No. 700750

Pfeil Carving Tool, Gouge/V-Parting Tool, Short Bent, Sweep 11A / 2 mm

Pfeil Carving Tools, Gouges/V-Parting Tools, Short Bent

Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
variants
 
€33.30

incl. VAT plus shipping costs

Article No. 700705

Pfeil Children’s Carving Tool, Junior Carver

Pfeil Children’s Carving Tool, Junior Carver

Carving is not just great fun for children, it also has educational value. The child-friendly handle of oiled beech and the short multiform blade of proven Pfeil quality make for easy handling. L-form blade.
 
€22.10

incl. VAT plus shipping costs

Article No. 701500

Pfeil Chip Carving Knife, Shape 12, Blade Width 11 mm

Pfeil Chip Carving Knife, Shape 12, Blade Width 11 mm

Ground and polished, ready-to-use chip carving knives with fine oiled cherry wood handles. The form and size are perfectly aligned for freehand carving of small figures, chamfering and wickerwork.
variants
 
€19.20

incl. VAT plus shipping costs

Article No. 700931

Pfeil Chip Carving Knife, Shape 10, Blade Width 8 mm

Pfeil Chip Carving Knife, Shape 10, Blade Width 8 mm

Ground and polished, ready-to-use chip carving knives with fine oiled cherry wood handles. The form and size are perfectly aligned for freehand carving of small figures, chamfering and wickerwork.
variants
 
€15.60

incl. VAT plus shipping costs

Article No. 700929

variants
 
€24.20

incl. VAT plus shipping costs

Article No. 700793

Pfeil Carving Tools  »Val Gardena«, 11-Piece Set

Pfeil Carving Tools »Val Gardena«, 11-Piece Set

This set of eleven Pfeil carving tools for quick and easy preliminary cutting of large figures was put together in cooperation with experienced sculptors from the State Vocational School in Gröden (South Tyrol). Delivered in a practical...
 
€406.80

incl. VAT plus shipping costs

Article No. 700669

Pfeil Chisel, 6-Piece Set

Pfeil Chisels

Precision-made chisels with a traditional design. Forged from a chrome-vanadium steel alloy, heat-treated in an electric furnace, then ground and polished by hand. The high quality of these chisels is noticeable in their uniform hardness...
variants
 
€179.00

incl. VAT plus shipping costs

Article No. 700997

Pfeil Compact Carving Tools, 18-Piece Set

Pfeil Compact Carving Tools, 18-Piece Set

No. 700670 / 700671 / 700672 / 700673 / 700674 / 700675 / 700676 / 700677 / 700678 / 700679 / 700680 / 700681 / 700682 / 700683 / 700684 / 700685 / 700686 / 700687 . Comes in a fine beechwood case.
 
€499.00

incl. VAT plus shipping costs

Article No. 700693

Pfeil Carving Tool, Gouge/V-Parting Tool, Short Bent, Sweep 12A / 3 mm

Pfeil Carving Tools, Gouges/V-Parting Tools, Short Bent

Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
variants
 
€33.30

incl. VAT plus shipping costs

Article No. 700725

Pfeil Carving Tool, V-Parting Tool, Sweep 22 / 6 mm, Winged V-Parting Tool

Pfeil Carving Tools, V-Parting Tools

V-parting tools are popularly used in relief carving to delimit areas. Another important use is the cutting of even grooves.
variants
 
€48.70

incl. VAT plus shipping costs

Article No. 700730

Pfeil Carving Tool, Dragon Gouge, Bevel Straight

Pfeil Carving Tool, Dragon Gouge, Bevel Straight

This strongly bent gouge is ideal for deep recesses and for finishing corners, lettering and ornaments.
 
€34.90

incl. VAT plus shipping costs

Article No. 700689

Pfeil Carving Tool, V-Parting Tool, Sweep 23 / 6 mm, Macaroni Tool

Pfeil Carving Tools, V-Parting Tools

V-parting tools are popularly used in relief carving to delimit areas. Another important use is the cutting of even grooves.
variants
 
€39.30

incl. VAT plus shipping costs

Article No. 700760

Pfeil Carving Tool, Gouge/V-Parting Tool, Long Bent, Sweep 8L / 4 mm

Pfeil Carving Tools, Gouges/V-Parting Tools, Long Bent

The long bent form is used in curved recesses to allow you to cut out of the piece from the deepest point without damaging the edges of recess.
variants
 
€36.30

incl. VAT plus shipping costs

Article No. 701253

Pfeil Allongee Gouges, Sweep 3 / 50 mm

Pfeil Allongee Gouges

With its extra-hard white beech handle and heavy-duty ferrule, this gouge is designed for rough shaping with the mallet and can resist even the toughest impact.
variants
 
€85.40

incl. VAT plus shipping costs

Article No. 701274

Pfeil Chip Carving Knife, Shape »Briez«, Blade Width 15 mm

Pfeil Chip Carving Knife, Shape »Briez«, Blade Width 15 mm

Ground and polished, ready-to-use chip carving knives with fine oiled cherry wood handles. The form and size are perfectly aligned for freehand carving of small figures, chamfering and wickerwork.
variants
 
€21.30

incl. VAT plus shipping costs

Article No. 700932

Pfeil Carving Tool, Gouge, Straight, Sweep 7 / 2 mm

Pfeil Carving Tools, Gouges, Straight

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
variants
 
€28.30

incl. VAT plus shipping costs

Article No. 700839

Pfeil Carving Tool, Gouge, Straight, Sweep 2 / 5 mm

Pfeil Carving Tools, Gouges, Straight

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
variants
 
€27.80

incl. VAT plus shipping costs

Article No. 701223

variants
 
€134.00

incl. VAT plus shipping costs

Article No. 700939

Pfeil Chip Carving Knife, Shape 15, Blade Width 12 mm

Pfeil Chip Carving Knife, Shape 15, Blade Width 12 mm

Ground and polished, ready-to-use chip carving knives with fine oiled cherry wood handles. The form and size are perfectly aligned for freehand carving of small figures, chamfering and wickerwork.
variants
 
€22.10

incl. VAT plus shipping costs

Article No. 701282

Pfeil Two-handed Gouge-shaped Adze, Sweep 7

Pfeil Two-handed Gouge-shaped Adze, Sweep 7

Robust, drop-forged adze with untreated ash handle. Inside bevel for precise cutting action due to straight contact surface.
 
€124.00

incl. VAT plus shipping costs

Article No. 700942

Pfeil Carving Tool, Gouge, Straight, Sweep 3 / 3 mm

Pfeil Carving Tools, Gouges, Straight

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
variants
 
€27.80

incl. VAT plus shipping costs

Article No. 700821

Pfeil Chip Carving Knife, Shape 7, Blade Width 13 mm

Pfeil Chip Carving Knife, Shape 7, Blade Width 13 mm

Ground and polished, ready-to-use chip carving knives with fine oiled cherry wood handles. The form and size are perfectly aligned for freehand carving of small figures, chamfering and wickerwork.
variants
 
€15.10

incl. VAT plus shipping costs

Article No. 700926

Pfeil Mini Chisels, 4-Piece Set

Pfeil Mini Chisels, 4-Piece Set

These compact chisels made of chrome/vanadium steel (60 HRC) allow you to work very closely and precisely on the workpiece. They are therefore ideal for cleaning up fittings, fine wood joints and all other kinds of detailed work and can...
 
€123.00

incl. VAT plus shipping costs

Article No. 700994

Pfeil Chip Carving Knife, Shape 3, Blade Width 14 mm

Pfeil Chip Carving Knife, Shape 3, Blade Width 14 mm

Ground and polished, ready-to-use chip carving knives with fine oiled cherry wood handles. The form and size are perfectly aligned for freehand carving of small figures, chamfering and wickerwork.
variants
 
€15.60

incl. VAT plus shipping costs

Article No. 700927

Pfeil Scorp Gouge, Size 2

Pfeil Scorp Gouge, Size 2

This scorp gouge is primarily used for hollowing out large bowls and for chair seats. The hefty cherrywood handle provides a comfortable grip and the curved 3.5 mm blade can even tackle hardwood.
 
€71.80

incl. VAT plus shipping costs

Article No. 700702

Pfeil Carving Tools, Ash, 25-Piece Set, Wooden Case

Pfeil Carving Tools, Ash, 25-Piece Set, Wooden Case

With these 20 sculptor's tools plus accessories you are perfectly equipped for a wide range of challenging carving projects: sweep 1 (flat) / 16 mm; sweep 1 S (flat/skew) / 16 mm; sweep 2 / 20 mm; sweep 3 / 3 mm; sweep 3 / 12 mm; sweep 3...
 
€1,054.00

incl. VAT plus shipping costs

Article No. 700892

Pfeil Carving Tool, Gouge, Straight, Sweep 5 / 3 mm

Pfeil Carving Tools, Gouges, Straight

Gouges are used for anything from rough work to shaping and finishing, and are therefore the most versatile sculptor's tools. If necessary, each of these gouges can also be used the other way round to work on convex surfaces. Sweep 11,...
variants
 
€27.80

incl. VAT plus shipping costs

Article No. 700830

Pfeil Carving Tool, Gouge/V-Parting Tool, Short Bent, Sweep 8A / 4 mm

Pfeil Carving Tools, Gouges/V-Parting Tools, Short Bent

Similar to the long bent form, these gouges are also used for deep, curved shapes. The even stronger bend of the gouge allows you to carve transitions in even deeper areas and to create small radiuses and arches.
variants
 
€28.60

incl. VAT plus shipping costs

Article No. 701264

variants
 
€25.40

incl. VAT plus shipping costs

Article No. 700635

1 of 4