Axminster Wall-mounted Tool Holder Set
Practical wall-mounted tool holders for lathe equipment as a set: for safe storage of #2 MT accessories, a set of jaws and a chuck with M33 x 3.5 mm DIN 800 thread.
€75.00
incl. VAT plus shipping costs
Article No. 730838
Locking Ring ASR
Once mounted on the groove of the spindle and the groove of the clamping attachment, this locking ring prevents the clamping attachments (e.g. chuck, faceplate, etc.) from coming off or braking the lathe during operation. However, the...
€41.70
incl. VAT plus shipping costs
Article No. 720741
Lathe Alignment Tool, #2 MT
Since many lathes have a rotating or sliding headstock, this alignment tool is an indispensable accessory. The correct alignment of the lathe centres is important, as this prevents damage to the bearings, for example. However, it also...
€19.90
incl. VAT plus shipping costs
Article No. 731489
Drill Bits Set, 8 mm, MK2
Specially developed for the production of lamp stands and for drilling through spindles and columns, this deep drill bits set is indispensable. Turn your woodturning obejcts as usual between the included spur drivers, using the...
€106.00
incl. VAT plus shipping costs
Article No. 740062
Axminster Lathe Alignment Tool #2 MT/#2 MT
When resetting a rotating headstock without an exact stop or engagement on the lathe bed, e.g. to turn between centres again, the double morse taper can be used to align headstock and tailstock. For lathes with #2 MT mandrels in...
€25.10
incl. VAT plus shipping costs
Article No. 731710
Axminster Mounting Plate for Tool Posts, 75 mm
The 75 mm diameter mounting plate is screwed directly onto post No. 707882 instead of the tool rest. The mounting plate enables you to decorate, carve or drill workpieces directly on the lathe. Concentric grooves in the plate make it...
€39.90
incl. VAT plus shipping costs
Article No. 745287
Magnetic Base Light
An indispensable workshop accessory that is particularly helpful in delicate woodturnery. With the long flexible arm and the 180° swivel head, you can optimally illuminate thin-walled objects and green woodwork. The magnetic base can be...
€115.70
incl. VAT plus shipping costs
Article No. 705118
COBAelite Diamond Anti Fatigue Mat, 0.9 x 1.2 m
Premium anti-fatigue mat with first-class ergonomic properties. These properties not only increase standing comfort, but also prevent back pain and other musculoskeletal disorders. The one-piece mat with increased safety has an...
€159.00
incl. VAT plus shipping costs
Article No. 706657
Axminster Wall-mounted Tool Holder for #2 MT Accessories
With the lacquered wall-mounted tool holder for #2 MT accessories, which can be fixed to the wall using three screws (not included), up to six accessories with a #2 MT morse taper can be stored within easy reach.
€24.10
incl. VAT plus shipping costs
Article No. 730840
Taper Wiper
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€8.20
incl. VAT plus shipping costs
Article No. 704262
Hope Aluminium Grinding Disc Ø 145 mm, with Velcro Coating
Handy sanding disc that fits direct onto your lathe chuck. The dovetailed recess in the back is 55 mm. Fits most standard chucks with 100 mm diameter and jaws, including super nova, Record sc4, Vicmarc, etc. Not suitable for Axminster...
€32.80
incl. VAT plus shipping costs
Article No. 707959
Extraction Hose, Ø 100 mm
Flexible, steel wire reinforced hose with rubber cuffs at each end. Ideal for mobile extractors in the workshop. The rubber cuffs can suit extraction outlets of around 100 to 110 mm diameter quickly and easily.
€91.30
incl. VAT plus shipping costs
Article No. 720546