DICTUM Shelf for Lathe Switch Unit
For mounting on the lathe bed. An articulated arm enables the individual positioning of the support shell. This allows the control box to be attached quickly and easily at a readily accessible position. Fits DICTUM Lathe S 175 (No....
€39.90
incl. VAT plus shipping costs
Article No. 707788
Axminster Round Tool Rest
The Axminster tool rest system enables the combination of different round tool supports. Made of high-quality, rustproof steel. Due to the round shape, the woodturning tools glide very smoothly over the tool rest. Suitable for all lathes...
€16.90
incl. VAT plus shipping costs
Article No. 707882
Bed Extension and Outboard Spindle for Powermatic 4224B Lathe
Expands the lathe bed by 500 mm (20 inches). When used as a faceplate, the centre height is increased to 610 mm. The additional weight of 52 kg gives the lathe even more mass and stability. Fits Powermatic 4224B lathe. Incl. extension...
€499.00
€459.00
incl. VAT plus shipping costs
Article No. 720662
Munro Tool Sharpening Jig
Practical cutter holder for easy re-sharpening of cutting wheels. Fits No. 728959 , 728962 , 728963 .
€6.40
incl. VAT plus shipping costs
Article No. 728966
€25.30
incl. VAT plus shipping costs
Article No. 714158
€48.20
incl. VAT plus shipping costs
Article No. 707785
Wall-mounted Holder for Woodturning Tools
Practical holder for your woodturning tools. Always ready to hand on the wall. The distance between the lower and upper part can be selected according to the length of the tools to be stored. For tools of different lengths, you can use a...
€39.00
incl. VAT plus shipping costs
Article No. 711681
Hamlet Craft Tools Hollowing Gate
The Hamlet Hollowing Gate makes it easier to control the tool, especially when making heavy rip and cross cuts when turning hollow forms. Suitable for all lathes with shank diameter 25.4 mm (1 inch) for the tool rest. Tool holder for...
€68.60
incl. VAT plus shipping costs
Article No. 701631
HAGER Quickly Adjustable Dust Extractor, 100 mm diameter
Rotating dust extractor with adjustable length. HAGER lathes already feature mounting holes on their headstock base. Clamping knob to adjust the device in all directions. Trapezoid-shaped collector, 300 x 235 x 60 mm. Extractor...
€165.00
incl. VAT plus shipping costs
Article No. 706464
Axminster Wall-mounted Tool Holder for Chuck, M33 x 3.5 mm DIN...
With the stainless steel wall-mounted holder for chucks, which can be fixed to the wall by means of two screws (not included), your chucks are stored within easy reach and the thread is safely protected from damage. Suitable for all...
€31.40
incl. VAT plus shipping costs
Article No. 730839
Axminster Wall-mounted Tool Holder for Accessory Jaws
With the lacquered wall-mounted tool holder for Axminster jaws, which can be fixed to the wall using three screws (not included), your jaws are stored within easy reach.
€24.10
incl. VAT plus shipping costs
Article No. 730841
Axminster Woodturning ASR Locking Ring
The locking ring adds another level of safety when turning on the lathe. When the lathe runs in reverse or stops, the precision engineered tool prevents threaded fittings such as chucks or faceplates from becoming loose. Both spindle and...
€41.00
incl. VAT plus shipping costs
Article No. 745291