Mitsukawa »Expert 170«, Kataba Saw, Universal
Product no.:
712687
Brand:
Sonstige
€68.50 €57.56
per piece(s)
Currently unavailable until further notice.
- Blade length 170 mm
- Blade thickness 0.4 mm
- Blade width 42 mm
- Cutting direction Alternating: across and along the grain
- For material Furniture wood or dry wood
Description
The small tooth spacing of only 1.25 mm makes the saw ideal for clean cuts across, along and diagonally to the grain. The tooth line is a mix of triangular and trapezoidal toothing. The tooth spacing optimises chip ejection to reduce the cutting load. Perfect for mitre cuts.
Expert saws
Beautifully shaped saws, handmade and light as a feather - they lie almost weightlessly in the hand. Minimal cutting forces, fine kerfs and a precise cutting course make these saws the tools of choice for demanding wood joints. The lightweight kiri wood handles bear discreetly engraved symbols indicating the cutting direction. For over three generations, the »Mitsukawa« master smithy has been perfecting traditional craftsmanship to make these special saws:
- Blades made of SK-4 steel (61 HRC) for a long service life; we recommend protecting the blade from corrosion with camellia oil after use
- Each saw is inspected and hand-engraved by the master smith
- Allows resharpening by hand
- If used and cared for properly, these saws will last a lifetime
- Ultimate flexibility and stability of the blade
- Low-friction cutting
- Fine kerfs
- Recommended for very precise and detailed cuts
Properties
| Blade length: | 170 mm |
|---|---|
| Blade thickness: | 0.4 mm |
| Blade width: | 42 mm |
| Cutting direction: | Alternating: across and along the grain |
| For material: | Furniture wood or dry wood |
| For workpiece width: | Up to 10 cm |
| Handle version: | Wooden handle |
| Overall length: | 400 mm |
| Setting: | 0.45 mm |
| Tooth configuration: | Universal teeth |
| Typ: | Kataba saws |
| Version: | Wooden handle |
| Zahnteilung: | 1.25 mm |
Properties
| Blade length: | 170 mm |
|---|---|
| Blade thickness: | 0.4 mm |
| Blade width: | 42 mm |
| Cutting direction: | Alternating: across and along the grain |
| For material: | Furniture wood or dry wood |
| For workpiece width: | Up to 10 cm |
| Handle version: | Wooden handle |
| Overall length: | 400 mm |
| Setting: | 0.45 mm |
| Tooth configuration: | Universal teeth |
| Typ: | Kataba saws |
| Version: | Wooden handle |
| Zahnteilung: | 1.25 mm |
Frequently bought together
Matching items
Manufacturer
| Name: | Sonstige |
|---|---|
| Mailing address: | Gottlieb-Daimler-Str. 3 94447 Plattling Deutschland |
| Homepage: | https://www.dictum.com |
| Email address: | [email protected] |
| Phone: | +49 (0)9931 4058-100 |
Additional content
-
EXPERT KNOWLEDGE Japanese Saws
