DICTUM Short Tool Jig SW-36
For short carving blades, hollow gouges and V-parting tools or small woodturning gouges A plastic cap on the pressure screw avoids pressure marks on the tools. Clamping width max. 36 mm.
€15.50
incl. VAT plus shipping costs
Article No. 721041
DICTUM Universal Tool Rest STU-110
Support table for sharpening flat cutting edges such as flat chisels and scraper blades, parting tools and inshaves. The 107 x 88 mm support enables a wide range of tools to be guided safely. Suitable for sharpening machines with guide...
€17.90
incl. VAT plus shipping costs
Article No. 721044
DICTUM Universal Jig 90° SU-77
For straight cutting edges such as plane blades, chisels and paring chisels. A fence aligns the clamped blades at a 90° angle. Clamping width max. 77 mm. Suitable for sharpening machines with guide rod diameter 12 mm.
€24.30
incl. VAT plus shipping costs
Article No. 721037
DICTUM Plane Blade Jig SHV-77
This variable grinding jig for plane blades up to max. 77 mm width can be tilted +/- 5° by means of additional adjusting screws. This allows plane blades to be fixed and sharpened at precise angles. By turning back both adjusting screws,...
€39.90
incl. VAT plus shipping costs
Article No. 721051
Clamping Sleeve for Adaptor Flange
For mounting CBN grinding wheels Ø 150 mm e.g. on Low-speed Grinder DS 150 L (No. 720782 ). By means of this sleeve, the adaptor flange for CBN grinding wheels can be conveniently clamped to the machine shaft. The clamping sleeve bridges...
€5.10
incl. VAT plus shipping costs
Article No. 707837
Base Plate for DICTUM Double-wheeled Grinder
Matching base plate to connect the Wolverine sharpening system to the DICTUM Low-speed Grinder DS 150 L. The Oneway Wolverine sharpening system (No. 702170 ) was specially developed for sharpening woodturning tools. On double-wheeled...
€39.90
incl. VAT plus shipping costs
Article No. 731699
Adaptor Flange with Precision Disc, Bore 12.7 mm
The flange reduces the 32 mm standard bore of the grinding wheels to the 12.7 shaft diameter. It ensures an extremely smooth-running wheel in both axial and radial directions, and even better grinding results. Made in steel.
€12.90
incl. VAT plus shipping costs
Article No. 820908
Cleaning Block for Abrasives
Prevents the build-up of sanding dust and resin on abrasives. This increases the abrasive quality and increases the service life of the abrasive by two to four times. For sanding belts, discs, drums, etc. 200 x 38 x 38 mm.
€10.60
incl. VAT plus shipping costs
Article No. 707763
DICTUM Sharpening Device for BS 50-55
The precisely milled cross slide allows the arm to be moved in two directions at the same time in one operation. Almost all common jigs, e.g. for straight cutting edges, gouges, grinding tables, etc., can be attached and quickly...
€129.00
incl. VAT plus shipping costs
Article No. 729398
DICTUM Sharpening Device for Convex Bevels
Sharpening knives with convex bevels, as is often the case with outdoor or bushcraft knives, is usually only possible by hand. The additional belt guide roller of the BS 50/55 Belt Grinding Device (No. 711284 ) guides the belt in a...
€69.00
incl. VAT plus shipping costs
Article No. 729794
DICTUM Mounting Base for Sharpening Device for Convex Bevels
Used as a connecting link between the Sharpening Device for Convex Bevels (No. 729794 ) and the Belt Grinding Device BS 50/55 (No. 711284 ).
€13.90
incl. VAT plus shipping costs
Article No. 729795
Polishing Disc Mount, Tapered, Pair
The tapered thread makes it possible to clamp polishing discs with bore diameter 3-13 mm. For machine shafts with diameter 10 mm. Overall length 92 mm.
€10.60
incl. VAT plus shipping costs
Article No. 728798