Axminster Dovetail Jaws, Type E
Chuck: Essential SK88 External chucking: 35-65 mm / internal chucking: 50-80 mm Gentle clamping with non-serrated dovetail jaws. Round workpieces can be clamped particularly gently because of the smooth jaw surface. The dovetail shape is...
€39.90
incl. VAT plus shipping costs
Article No. 745298
Axminster Dovetail Jaws, Type A
Chuck: Essential SK88 External chucking: 45-75 mm / internal chucking 75-110 mm Gentle clamping with non-serrated dovetail jaws. Round workpieces can be clamped particularly gently because of the smooth jaw surface. The dovetail shape is...
€49.90
incl. VAT plus shipping costs
Article No. 745299
Axminster Gripper Jaws, Type H
Chuck: Essential SK88 External chucking: 35-65 mm / internal chucking: 47-82 mm Spigot jaws for small and medium-sized workpieces. The serrated insides and outsides of the jaws hold workpieces by clamping or expanding on the inside of...
€71.90
incl. VAT plus shipping costs
Article No. 745300
Axminster Pen Jaws
Chuck: Essential SK88 External chucking: round cross-sections 12-40 mm / square cross-sections 12-45 mm For drilling pen blanks on the lathe. Drill and blank are centred exactly on the same axis on the lathe. The 42 mm deep jaw profile...
€54.50
incl. VAT plus shipping costs
Article No. 745301
Axminster Gripper Jaws
Chuck: Essential SK88 External chucking: 35-65 mm / internal chucking: 50-80 mm Spigot jaws for small and medium-sized workpieces. The serrated insides and outsides of the jaws hold workpieces by clamping or expanding on the inside of...
€79.90
incl. VAT plus shipping costs
Article No. 745302
Axminster SK88 Faceplate Ring
With the face plate ring combined with the type E jaws, you will not need a separate face plate. The ring is screwed to the workpiece and clamped with the dovetail jaws. Outer diameter 88 mm. Fits Axminster Type E Dovetail Jaws (No....
€26.90
incl. VAT plus shipping costs
Article No. 745303
Axminster SK88 Screw Chuck
Suitable screw chuck for Axminster Dovetail Jaws, Type A (No. 745299 ) and Axminster Dovetail Jaws, Type E (No. 745298 ).
€14.90
incl. VAT plus shipping costs
Article No. 745304
Teknatool SuperNOVA2 Four-Tooth Spur Driver, Square Shaft
Designed for use in combination with the 50 mm dovetail jaws (No. 720673 ). The driver can simply be used on the chuck that is already installed - which means there is no need to remove it.
€24.30
incl. VAT plus shipping costs
Article No. 720700
Axminster Wall-mounted Tool Holder Set
Practical wall-mounted tool holders for lathe equipment as a set: for safe storage of #2 MT accessories, a set of jaws and a chuck with M33 x 3.5 mm DIN 800 thread.
€75.00
incl. VAT plus shipping costs
Article No. 730838
€74.90
incl. VAT plus shipping costs
Article No. 707719
Locking Ring ASR
Once mounted on the groove of the spindle and the groove of the clamping attachment, this locking ring prevents the clamping attachments (e.g. chuck, faceplate, etc.) from coming off or braking the lathe during operation. However, the...
€41.70
incl. VAT plus shipping costs
Article No. 720741
Axminster Carrier For C Jaws, #2 MT
Morse taper shank fits Axminster Type C Dovetail Jaws (No. 702246 ). This adapter will save you time-consuming changes from chuck to driver or other accessories with a #2 MT shank. Simply clamp the morse taper shank with the jaws and...
€30.90
incl. VAT plus shipping costs
Article No. 731708