Teknatool SuperNOVA2 Soft Jaw Chuck Accessory Set
For creating individual clamping jaws. Especially advantageous when working with delicate woods. The nylon material can be turned, drilled and sawn. Diameter when spigot is open approx. 140 mm, 27 mm thick.
€22.10
incl. VAT plus shipping costs
Article No. 720688
Teknatool SuperNOVA2 Schwalbenschwanzbacken
Dovetail shaped sides for a secure grip, suitable for all conventional projects. Non-serrated jaws for clamping delicate materials. Suitable for Teknatool SuperNOVA2 and TITAN chucks.
€48.30
incl. VAT plus shipping costs
Article No. 720690
Teknatool SuperNOVA2 Stepped Jaws, Ø 20 mm
This jaw covers all conventional expansion diameters. The dovetail shaped external sides ensure that your work will be held gently and securely. With serrated insides for generating high clamping forces. Suitable for turning without...
€42.20
incl. VAT plus shipping costs
Article No. 720691
Teknatool SuperNOVA2 Spigot Jaws, Non-serrated
With longer spigots for narrow and longer workpieces. Dovetail shaped ends for clamping e.g. small bowls. With non-serrated jaws for carefully clamping delicate materials. Suitable for Teknatool SuperNOVA2 and TITAN chucks.
€50.30
incl. VAT plus shipping costs
Article No. 720692
€13.90
incl. VAT plus shipping costs
Article No. 720694
Teknatool SuperNOVA2 Screw-On Mandrel Screw Chuck
For clamping into the relevant SuperNOVA2 clamping jaws or faceplate segments and hence also suitable for use as a screw chuck.
€19.30
incl. VAT plus shipping costs
Article No. 720695
Teknatool SuperNOVA2 Faceplate Holders, Set
A set of faceplate screws with rubber holders. Suitable for Teknatool SuperNOVA2 faceplate segments.
€19.00
incl. VAT plus shipping costs
Article No. 720699
Teknatool SuperNOVA2 Faceplate Ring
This faceplate ring is designed for being screwed to the workpiece and for then expanding the dovetail jaws into the recess in the centre of the ring. Also perfect for mounting home-made sanding discs or for working on large rings or...
€26.90
incl. VAT plus shipping costs
Article No. 720701
Teknatool SuperNOVA2 Faceplate Holders, Add-On Kit
Expansion set with eight square and eight round holders each with small diameters, including screws. Suitable for Teknatool SuperNOVA2 faceplate segments.
€34.80
incl. VAT plus shipping costs
Article No. 720704
Teknatool SuperNOVA2 Adapter, 1 Inch x 8 tpi
Suitable for the Insert Version of Teknatool SuperNOVA2 Chuck (No. 720753 ).
€29.40
incl. VAT plus shipping costs
Article No. 720705
Teknatool SuperNOVA2 Infinity Retro Fit Kit for NOVA Chucks
For using the Infinity quick-clamping jaws on a standard Teknatool NOVA chuck. The Teknatool SuperNOVA2, G3 and MIDI chucks can be converted with the retrofit kit consisting of four jaw sliders. Simply replace the standard jaws with the...
€105.80
€94.90
incl. VAT plus shipping costs
Article No. 720749
Teknatool SuperNOVA2 Infinity Push Pin Handle
Single-hand operation tension lever, suitable for Teknatool SuperNOVA2 Infinity chuck (No. 720742 ). For maximum ease when changing Infinity chuck jaws.
€17.50
incl. VAT plus shipping costs
Article No. 720751
Oneway Flat Jaws for individual clamping situations, Stronghold
Wooden blocks are screwed to the face of the jaws which are then turned. This way you are able to make your own custom grip jaw set.
€40.90
incl. VAT plus shipping costs
Article No. 702136
€5.90
incl. VAT plus shipping costs
Article No. 730752
Faceplate, Ø 80 mm
Faceplate made of steel with one ring of timber-mounting holes. For screwing on workpieces with larger diameters. For use with a 42 mm open-end wrench.
€53.80
incl. VAT plus shipping costs
Article No. 714156
Teknatool SuperNOVA2 Dovetail Jaws
Dovetail shaped sides for a secure grip, suitable for all conventional projects. Non-serrated jaws for clamping delicate materials. Suitable for Teknatool SuperNOVA2 and TITAN chucks.
€39.80
incl. VAT plus shipping costs
Article No. 720689
€5.30
incl. VAT plus shipping costs
Article No. 720697
Axminster Accessory Mounting Jaws
Base jaws to accommodate Axminster dovetail jaws. The accessory mounting jaws can be provided with clamping jaws and thus enable a faster jaw change. Fits the following chuck types: Clubman SK80 Clubmann SK100
€45.00
incl. VAT plus shipping costs
Article No. 731701
Axminster Eccentric Spiralling Chuck
A combination of eccentric faceplate and spiralling chuck. The clamped workpiece can thus be additionally rotated around its own axis. A locking pin and a scale on the outer ring ensure repeatability or the possibility of resetting the...
€84.00
incl. VAT plus shipping costs
Article No. 731702
Axminster Pen Jaws
For drilling pen blanks on the lathe. Drill and blank are centred exactly on the same axis on the lathe. The 42 mm deep jaw profile clamps round and square blanks. Clamping range for round cross-sections 16-44 mm, clamping range for...
€102.70
incl. VAT plus shipping costs
Article No. 731703
Axminster Faceplate Ring for Type C Dovetail Jaws
With the face plate ring combined with the type C jaws, you will not need a separate face plate. The ring is screwed to the workpiece and clamped with the dovetail jaws. Outer diameter 100 mm, inner diameter 68.5 mm. Fits Axminster Type...
€38.70
incl. VAT plus shipping costs
Article No. 731705
Axminster Internal & External Aluminium Step Jaws for...
The stepped aluminium jaws can be screwed directly onto the base jaws of the Axminster lathe chucks (SK80, SK100, SK114). They facilitate a wide range of applications, e.g. clamping round bars, discs or can lids. Clamping dimensions*...
€78.10
incl. VAT plus shipping costs
Article No. 731707
Axminster Screw Chuck Insert for Axminster Jaws
With this insert, Axminster lathe chucks can also be used as screw chucks. Screw 10 x 25 mm (core diameter 7.5 mm). Fits Axminster Type C Dovetail Jaws (No. 702246 ).
€29.00
incl. VAT plus shipping costs
Article No. 731711
Axminster Dovetail Jaws Type A Plus
Gentle clamping with non-serrated dovetail jaws. Round workpieces can be clamped particularly gently because of the smooth jaw surface. The dovetail shape is ideal for clamping at bowl recesses as well as screw chucks and faceplate...
€83.70
incl. VAT plus shipping costs
Article No. 731712
Axminster SK80 Dovetail Jaws Type C
Gentle clamping with non-serrated dovetail jaws. Round workpieces can be clamped particularly gently because of the smooth jaw surface. The dovetail shape is ideal for clamping at bowl recesses.
€49.80
incl. VAT plus shipping costs
Article No. 731713
Axminster Soft Jaws, Ø 115 mm
These plastic jaws make it possible to create your own jaw shapes. The plastic is easy to work with using a scraper. In addition to producing your own jaw shapes, plastic jaws are also ideal for clamping sensitive surfaces. Made of glass...
€44.90
incl. VAT plus shipping costs
Article No. 731714
Axminster Deep Grip Jaws
The 40 mm deep jaws with coarse serration inside and outside (also called Piranha jaws) are suitable for long, large workpieces. The serration provides special hold for large, heavy workpieces or wet wood. Fits the following chuck types:...
€143.90
incl. VAT plus shipping costs
Article No. 731715
Axminster Hollow Form Jaws
For turning large hollow forms. The 44 mm deep clamping jaws offer enormous clamping force and extreme holding power. The insides of the jaws have coarse serrations which securely clamp a turned post with a diameter of 100 mm. The end of...
€135.00
incl. VAT plus shipping costs
Article No. 731717
Axminster O’Donnell Dovetail Jaws, 25 mm
These jaws with a particularly large throat depth allow better accessibility to the bottom of bowls when they are clamped at the foot or recess. The clamping area is dovetailed inside and out, making it suitable for a wide range of...
€112.00
incl. VAT plus shipping costs
Article No. 731719
Axminster O’Donnell Dovetail Jaws, 38 mm
These jaws with a particularly large throat depth allow better accessibility to the bottom of bowls when they are clamped at the foot or recess. The clamping area is dovetailed inside and out, making it suitable for a wide range of...
€122.80
incl. VAT plus shipping costs
Article No. 731716
Axminster O’Donnell Dovetail Jaws, 50 mm
These jaws with a particularly large throat depth allow better accessibility to the bottom of bowls when they are clamped at the foot or recess. The clamping area is dovetailed inside and out, making it suitable for a wide range of...
€128.20
incl. VAT plus shipping costs
Article No. 731718
Axminster O’Donnell Jaw Inserts, 25 mm
The jaw inserts reduce the clamping diameter of the 50 mm O'Donnell dovetail jaws. This results in many clamping and chucking options that allow better access to the back of the workpiece. The insert jaws can only be used with the...
€56.00
incl. VAT plus shipping costs
Article No. 731721
Axminster O’Donnell Jaw Inserts, 38 mm
The jaw inserts reduce the clamping diameter of the 50 mm O'Donnell dovetail jaws. This results in many clamping and chucking options that allow better access to the back of the workpiece. The insert jaws can only be used with the...
€56.00
incl. VAT plus shipping costs
Article No. 731720
Axminster Button Jaws with 8 Rubber Buttons
Aluminium segments with adjustable, elastic clamping spigots for clamping parts with complex shapes without grooves or for finishing the rear of bowls. With rubber coating to protect your blanks (the clamping force is limited by the...
€74.00
incl. VAT plus shipping costs
Article No. 731709
Axminster Evolution SK100 Chuck, Solo
This chuck features a super-slim stainless steel body incorporating a new design of longer accessory mounting jaws. These jaws fit deeper in the chuck and offer a greater contact area within the canal of the chuck, thus minimising...
€312.40
incl. VAT plus shipping costs
Article No. 745227
Axminster Woodturning ASR Locking Ring
The locking ring adds another level of safety when turning on the lathe. When the lathe runs in reverse or stops, the precision engineered tool prevents threaded fittings such as chucks or faceplates from becoming loose. Both spindle and...
€41.00
incl. VAT plus shipping costs
Article No. 745291
Axminster Essential SK88 Chuck
The Axminster Woodturning Essential Chuck M33 DIN 800 is perfect for anyone looking to start woodturning. It is light and compact size makes it ideal for small- to medium-sized workpieces. The chuck features SafetyJaw accessory mounting...
€174.90
incl. VAT plus shipping costs
Article No. 745296
Teknatool SuperNOVA2 Four-Tooth Spur Driver, Square Shaft
Designed for use in combination with the 50 mm dovetail jaws (No. 720673 ). The driver can simply be used on the chuck that is already installed - which means there is no need to remove it.
€24.30
incl. VAT plus shipping costs
Article No. 720700
Axminster Wall-mounted Tool Holder Set
Practical wall-mounted tool holders for lathe equipment as a set: for safe storage of #2 MT accessories, a set of jaws and a chuck with M33 x 3.5 mm DIN 800 thread.
€75.00
incl. VAT plus shipping costs
Article No. 730838
€74.90
incl. VAT plus shipping costs
Article No. 707719
Locking Ring ASR
Once mounted on the groove of the spindle and the groove of the clamping attachment, this locking ring prevents the clamping attachments (e.g. chuck, faceplate, etc.) from coming off or braking the lathe during operation. However, the...
€41.70
incl. VAT plus shipping costs
Article No. 720741
Axminster Carrier For C Jaws, #2 MT
Morse taper shank fits Axminster Type C Dovetail Jaws (No. 702246 ). This adapter will save you time-consuming changes from chuck to driver or other accessories with a #2 MT shank. Simply clamp the morse taper shank with the jaws and...
€30.90
incl. VAT plus shipping costs
Article No. 731708
Woodturning Starter Set
This set includes everything you need to realise your first projects on the lathe. The set of Hattori HSS Turning Tools (No. 701850 ) is the ideal basic equipment for beginners. Cost-effective, robust turning tools made of heat-resistant...
€564.90
incl. VAT plus shipping costs
Article No. 745267
Teknatool SuperNOVA2 Jaws for Pen Blanks
These unique jaws have been especially designed to make it possible to drill pen blanks/square blanks on a woodturning lathe. The advantage of having two jaws is that the blank will always be clamped in the centre, regardless of...
€37.60
incl. VAT plus shipping costs
Article No. 720693