Electric carving tools

4 of 4
Replacement Belt for Arbortech Mini-Carver

Replacement Belt for Arbortech Mini-Carver

Fits Arbortech Mini-Carver No. 715609 .
€25.00

incl. VAT plus shipping costs

Article No. 830888

Kutzall Burr Set, Original, Fine, Shaft Diameter 3.2 mm

Kutzall Burr Set, Original, Fine, Shaft Diameter 3.2 mm

The set consists of four »Original fine« burrs: Long Taper Burr, Ø 5 x 23 mm (No. 727762 ) Sphere Burr, Ø 11 mm (No. 727753 ) Ball Nose Burr, Ø 8 x 13 mm (No. 727717 ) Flame Burr, Ø 8 x 13 mm (No. 727741 )
€58.90

incl. VAT plus shipping costs

Article No. 728005

Kutzall Burr Set, Original, Fine, Shaft Diameter 6.35 mm

Kutzall Burr Set, Original, Fine, Shaft Diameter 6.35 mm

The set consists of three »Original fine« burrs: Sphere Burr, Ø 28 mm (No. 727747 ) Ball Nose Burr, Ø 21 x 30 mm (No. 727723 ) Flame Burr, Ø 15 x 27 mm (No. 727738 )
€61.00

incl. VAT plus shipping costs

Article No. 728006

Replacement Blades for Arbortech Turbo Scraper, 3 Pieces

Replacement Blades for Arbortech Turbo Scraper, 3 Pieces

Fit Arbortech Turbo Scraper No. 715975 .
€53.90

incl. VAT plus shipping costs

Article No. 715976

€18.90

incl. VAT plus shipping costs

Article No. 715246

Sanding Arbor, Diameter 5 mm

Sanding Arbor, Diameter 5 mm

Self-cut abrasive fabric is inserted in the slot and wrapped around the arbor. This allows you to smooth extra-small radiuses. The external diameter can be enlarged by wrapping more layers around it. For abrasives up to a total thickness...
€3.20

incl. VAT plus shipping costs

Article No. 711141

Cutter Bit of Tungsten-Vanadium Steel, Cylinder Head, Ø 3.2 mm

Cutter Bits of Tungsten-Vanadium Steel

Made of a single blank with precisely ground cutting edges, these cutters are suitable for a wide range of applications. Can be used in softwood and hardwood, non-ferrous metals, precious metals, plastics and plaster. The highly...
variants
€12.80

incl. VAT plus shipping costs

Article No. 711154

Burnmaster Contact Tips, Pair

Burnmaster Contact Tips, Pair

Used with wire No. 715306 , these contact tips allow you to make your own tips. Fits Burnmaster Pen No. 715304 .
€8.20

incl. VAT plus shipping costs

Article No. 715305

Burnmaster Writing Tip 0.8 mm

Burnmaster Tips

Carefully crafted tips with copper contact probes for maximum conductivity. Length approx. 54 mm.
variants
€11.60

incl. VAT plus shipping costs

Article No. 715307

DICTUM HW Cutter Bit TiAlN, Shank Ø 8 mm, Pointed Cone, 10 x 20 mm

DICTUM HW Cutter Bit TiAlN, Shank Ø 6 mm

The cutter is suitable for processing wood, plastics, aluminium, brass, copper, zinc, etc. It allows freehand milling of narrow contours and details and is therefore also ideal for sculptural work with e.g. flexible shafts. In metal...
€32.90 €25.90

incl. VAT plus shipping costs

Article No. 704497

MANPA Grinding Spindle for Angle Grinder

MANPA Grinding Spindle for Angle Grinder

Grinding spindle for free-hand work with drive machines (angle grinder or drill). This allows, for example, penetrations on sculptural objects, tree edges etc. to be sanded effectively and quickly. Sanding sleeve diameter 19 mm, length...
€39.90

incl. VAT plus shipping costs

Article No. 729966

Diamond Blade for Arbortech Mini-Carver, Ø 54 x 1.5 x 9.53 mm

Diamond Blade for Arbortech Mini-Carver

Suitable for cutting and grinding tiles, stone and most masonry products as well as for sharpening tungsten carbide teeth.
€28.90

incl. VAT plus shipping costs

Article No. 715268

MANPA Velcro Sanding Discs, Ø 75 mm, 20-Piece Set, Grit 80

MANPA Velcro Sanding Discs, Ø 75 mm, 20-Piece Set

Velcro grinding discs. Suitable for MANPA Sanding Flex No. 729899 and sanding discs from other manufacturers.
variants
€8.90

incl. VAT plus shipping costs

Article No. 729957

MANPA Velcro Sanding Discs, Ø 100 mm, 20-Piece Set, Grit 80

MANPA Velcro Sanding Discs, Ø 100 mm, 20-Piece Set

Velcro grinding discs. Suitable for MANPA Sanding Flex No. 729900 and sanding discs from other manufacturers.
variants
€9.90

incl. VAT plus shipping costs

Article No. 729959

MANPA Velcro Sanding Discs, Ø 125 mm, 20-Piece Set, Grit 80

MANPA Velcro Sanding Discs, Ø 125 mm, 20-Piece Set

Velcro grinding discs. Suitable for MANPA Sanding Flex No. 729901 and sanding discs from other manufacturers.
variants
€11.90

incl. VAT plus shipping costs

Article No. 729961

Sanding Sleeves, Ø 19 mm x 70 mm, 40 Grit

Sanding Sleeves, Ø 19 mm x 70 mm

Fits MANPA Cutter No. 729966 . 5 pieces.
variants
€12.90

incl. VAT plus shipping costs

Article No. 729970

MANPA EZ-Sander 42

MANPA EZ-Sander 42

The longitudinally slotted flaps adapt well to strongly profiled workpieces. The brush inserts support the abrasive flaps and at the same time clean the surface, which increases the service life of the abrasive flaps. Set consists of...
€54.90

incl. VAT plus shipping costs

Article No. 730119

Sandpaper for MANPA EZ-Sander 42, Grit 60

Sandpaper for MANPA EZ-Sander 42

Sanding flaps suitable for MANPA EZ-Sander 42 (No. 730119 ). 24 pieces.
variants
€13.90

incl. VAT plus shipping costs

Article No. 730121

Brush Inserts for MANPA EZ-Sander 42

Brush Inserts for MANPA EZ-Sander 42

Brush inserts suitable for MANPA EZ-Sander 42 (No. 730119 ). 5 pieces.
€3.90

incl. VAT plus shipping costs

Article No. 730120

MANPA Belt Sander Attachment for Angle Grinder

MANPA Belt Sander Attachment for Angle Grinder

This attachment turns a standard angle grinder from Bosch or Makita into a belt sander. With the 30 mm wide sanding arm, work in narrow, hard-to-reach places can be performed easily and quickly. For an optimal working position, the...
€219.90

incl. VAT plus shipping costs

Article No. 729895

Sanding Belt for MANPA Belt Sander Attachment, 20-Piece Set, Grit 40

Sanding Belt for MANPA Belt Sander Attachment, 20-Piece Set

Fits MANPA Belt Sander Attachment No. 729895 .
variants
€29.90

incl. VAT plus shipping costs

Article No. 729898

MANPA Sanding Flex, 2 Inch

MANPA Sanding Flex, 2 Inch

Flexible sanding disc with Velcro that adapts to almost any contour. Together with the MANPA Sanding Mandrel No. 729905 , even deep vessels or recesses on sculptural objects can be ground quickly and precisely. For even more flexibility...
€11.90

incl. VAT plus shipping costs

Article No. 729899

MANPA Sanding Flex, 3 Inch

MANPA Sanding Flex

Flexible sanding disc with Velcro that adapts to almost any contour. Suitable for MANPA Multi Cutter and Universal Shaft No. 729904 , as well as for direct use on angle grinders with M10 thread (for M14 spindle thread use Adapter No....
variants
€12.90

incl. VAT plus shipping costs

Article No. 729900

MANPA Sanding Pads, 3-Piece Set, Ø 3 Inch (75 mm)

MANPA Sanding Pads, 3-Piece Set

Intermediate damping pad for sanding work on strongly curved contours. The pad with Velcro coating on both sides is positioned between the abrasive and the sanding disc. It also protects the sanding disc from premature wear.
variants
€19.90

incl. VAT plus shipping costs

Article No. 729902

Dremel 3000-15 Multipurpose Rotary Tool Kit

Dremel 3000-15 Multipurpose Rotary Tool Kit

This set comprises the Dremel 3000 Multi-tool and 15 original Dremel accessories, including the innovative Easy Twist system for easy and tool-free changing of accessories. Precise, variable speed, no-load speed from 10 000-33 000 rpm,...
€63.70

incl. VAT plus shipping costs

Article No. 704122

4 of 4