M. Power Tools Point.2.Point
For laying out equal spacings, e.g. dovetails, dowels, etc. Extends to 600 mm and can be locked in any position to transfer up to seven position markings (six equal spacings) to the workpiece. Stainless steel, brass screws. Not suitable...
€31.20
incl. VAT plus shipping costs
Article No. 707267
M. Power Tools Triscribe Marking Heads
Convert a try square into a precision marking gauge, or a flat ruler (up to 2.5 mm thick) into a practical measuring compass. Two marking heads, hardened needle insert, cutter insert with replacement blade, can also be used with pencil...
€23.90
incl. VAT plus shipping costs
Article No. 707268
Shinwa Scriber
Japanese log scriber for marking saddle notches in log house construction. Excellent value for money. Removable spirit level, rounded tip with copy function, fine tuning via spring tension. You can insert the pencil in the openings of...
€129.00
incl. VAT plus shipping costs
Article No. 707228
»mylogscriber« Log Scriber
For precise transfer of contours, especially for round timber corner joints (on log buildings). The »mylogscriber« impresses with its curved, glass bead blasted stainless steel tubes in combination with a wide variety of high quality...
€222.00
incl. VAT plus shipping costs
Article No. 730823
UJK 3-in-1 Trammel Set
This 3-in-1 trammel set can be used in three different ways: 1. Use both pins to mark out or scribe an arc. 2. Remove one pin and fitting the included HB pencil. 3. Replace one pin with a paper and card cutter blade which is also...
€49.00
incl. VAT plus shipping costs
Article No. 745274
UJK Trammel Set Extension Bar
Extension bar for UJK 3-in-1 trammel set (No. 745274 ). 64 cm long, gives a useful total length of 128 cm. Made of torsion-resistant aluminium profile with an easy-to-read metric scale.
€37.50
incl. VAT plus shipping costs
Article No. 745275
€16.40
incl. VAT plus shipping costs
Article No. 717187
€17.60
Article No. 717199
Multifunctional Marking T-Rule, 650 mm
This T-rule is a versatile tool for precise work. Its integrated functions enable precise scribing, accurate drilling and the marking of radii thanks to its compass function. A particular highlight is that the fence can be removed at the...
€169.00
incl. VAT plus shipping costs
Article No. 714769
Wing Divider, Polished Stainless Steel
Marking divider made of polished stainless steel, for parallel marking, transferring measurements, dividing distances or marking circles on leather. Maximum opening: 100 mm, shaft length: 70 mm.
€18.70
incl. VAT plus shipping costs
Article No. 745243